Latest ArticlesNitrogen doping is a promising way to modulate the electrical properties of graphene to realize graphene-based electronics and promise fascinating properties and applications. Herein, we report a method to noncovalently assembly titanium(Ⅳ) bis(ammoniumlactato) dihydroxide (Ti complex) on nitrogen-doped graphene to create a reliable hybrids which can be used as a reversible chemical induced switching. As the adsorption and desorption of Ti complex in sequential treatments, the conductance of the nitrogen-doped graphene transistors was finely modulated. Control experiments with pristine graphene clearly demonstrated the important effort of the nitrogen in this chemical sensor. Under optimized conditions, nitrogen-doped graphene transistors open up new ways to develop multifunctional devices with high sensitivity.
Volume expansion and polysulfide shuttle effect are the main barriers for the commercialization of lithium-sulfur (Li-S) battery. In this work, we in-situ polymerized a cross-linked binder in sulfur cathode to solve the aforementioned problems using a facile method under mild conditions. Polycarbonate diol (PCDL), triethanolamine (TEA) and hexamethylene diisocyanate (HDI) were chosen as precursors to prepare the cross-linked binder. The in-situ polymerized binder (PTH) builds a strong network in sulfur cathode, which could restrain the volume expansion of sulfur. Moreover, by adopting functional groups of oxygen atoms and nitrogen atoms, the binder could effectively facilitate transportation of Li-ion and adsorb polysulfide chemically. The Li-S battery with bare sulfur and carbon/sulfur composite cathodes and cross-linked PTH binder displays much better electrochemical performance than that of the battery with PVDF. The PTH-bare S cathode with a mass loading of 5.97 mg/cm2 could deliver a capacity of 733.3 mAh/g at 0.2 C, and remained 585.5 mAh/g after 100 cycles. This in-situ polymerized binder is proved to be quite effective on restraining the volume expansion and suppressing polysulfide shuttle effect, then improving the electrochemical performance of Li-S battery.
A series of Tm3+/Dy3+ co-doped Ba3LaNa(PO4)3F (BLNPF) phosphors were synthesized successfully via a high-temperature solid-reaction, and luminescence properties were investigated. Upon near violet excitation, BLNPF:Tm3+, Dy3+ phosphors exhibit Tm3+:1D2-3F4 and Dy3+:4F9/2-6HJ (J = 15/2, 13/2, 11/2) transitions with different luminescence intensity. The emitting color of the obtained products was found to shift from blue to white as a result of efficient energy transfer (ET) from Tm3+ to Dy3+ ions. According to photoluminescence emission intensity, the positive effect of activator on ETefficiency was calculated and the maximum ET efficiency was found around 72.6% with Dy3+ concentration was 0.04. By means of Dexter's theoretical model, furthermore, dipole-dipole interaction was confirmed as the mechanism of energy transfer from Tm3+ to Dy3+ ions. The results suggested that BLNPF:Tm3+, Dy3+ phosphor might be a promising single-phased white-light-emitting phosphor for UV white-light LED.
Pore size and distribution in carbon-based materials are regarded to be a key factor to affect the electrochemical capacitive performances of the resultant electrodes. In this study, nitrogen and oxygen codoped porous carbons (NOPCs) are fabricated based on a simple Schiff-base reaction between m-phenylenediamine and terephthalaldehyde. The NOPCs have tunable morphologies, high surface areas, abundant heteroatom doping. More importantly, the carbons show a dominant micropores of 0.5-0.8 nm, comparable to the ionic sizes of LiTFSI (Li+ 0.069 nm; TFSI-0.79 nm) water-in-salt electrolyte with a high potential window of 2.2 V. Consequently, the fabricated symmetric supercapacitor gives a high energy output of 30.5 Wh/kg at 1 kW/kg, and high stability after successive 10, 000 cycles with ~96.8% retention. This study provides promising potential to develop high-energy supercapacitors.
Biomass-derived carbon materials have obtained great attention due to their sustainability, easy availability, low cost and environmentally benign. In this work, bamboo leaves derived nitrogen doped hierarchically porous carbon have been efficiently synthesized via an annealing approach, followed by an etching process in HF solution. Electrochemical measurements demonstrate that the unique porous structure, together with the inherent high nitrogen content, endow the as-derived carbon with excellent lithium/sodium storage performance. The porous carbon annealed at 700 ℃ presents outstanding rate capability and remarkable long-term stability as anodes for both lithium-ion batteries and sodium-ion batteries. The optimized carbon delivers a high discharge capacity of 450 mAh/g after 500 cycles at the current density of 0.2 A/g for LIBs, and a discharge capacity of 180 mAh/g after 300 cycles at the current density of 0.1 A/g for SIBs
Supramolecular polymers constructed by orthogonal self-assembly based on multiple hydrogen bonding and macrocyclic host-guest interactions have received increasing attention due to their elegant structures, outstanding properties, and potential applications. Hydrogen bonding endows these supramolecular polymers with good adaptability and reversibility, while macrocyclic host-guest interactions give them good selectivity and versatile stimuli-responsiveness. Therefore, functional supramolecular polymers fabricated by these two highly specific, noninterfering interactions in an orthogonal way have shown wide applications in the fields of molecular machines, electronics, soft materials, etc. In this review, we discuss the recent advances of functional supramolecular polymers fabricated by orthogonal self-assembly based on multiple hydrogen bonding and host-guest interactions. In particular, we focus on crown ether- and pillar[n]arene-based supramolecular polymers due to their compatibility with multiple hydrogen bonds in organic solution. The fabrication strategies, interesting properties, and potential applications of these advanced supramolecular materials are mainly concerned.
Aromatic carboxylic acid self-assembly has been a hot research field for many scientists due to its strong coordination ability and flexible coordination mode. The hydrogen bond formed between aromatic carboxylic acids is a strong intermolecular force and has directionality and saturation, which plays a very important role in the self-assembly and regulation of aromatic carboxylic acids. In this review, we introduce surface organization formed by aromatic carboxylic acids with the aid of scanning tunneling microscopy (STM). These two-dimensional structures include molecular templates, host-guest systems, and photo-isomerization structures. We also emphasize the thermodynamics and dynamics, which are important research topics of current and future study.
Although intelligent hydrogels have shown bright potential application in biomedical fields, they were prepared by conventional methods and still face many serious challenges, such as uncontrollable stimulus-response and low response sensitivity. Recently, RAFT polymerization provides a versatile strategy for the fabrication of intelligent hydrogels with improved stimulus-response properties, owing to the ability to efficiently construct hydrogel precursors with well-defined structure, such as block copolymer, graft copolymer, star copolymer. In this review, we summarized the recent progress on intelligent hydrogels based on RAFT polymerization with emphasis on their fabrication strategies and applications for controlled drug delivery.
Nitrous oxide (N2O) is one of the significant greenhouse gases, and partial nitritation-anammox (PNA) process emits higher N2O than traditional nitrogen removal processes. N2O production in PNA mainly occurs in three different pathways, i.e., the ammonia oxidizing bacteria (AOB) denitrification, the hydroxylamine (NH2OH) oxidation and heterotrophic denitrifiers denitrification. N2O emission data vary significantly because of the different operational conditions, bioreactor configurations, monitoring systems and quantitative methods. Under the common operational parameter scopes of PNA, N2O emission via NH2OH oxidation dominates at relatively low dissolved oxygen (DO), low inorganic carbon (IC), high pH or low NO2- concentration, while N2O emission via AOB denitrification dominates at relative higher DO, higher IC, lower pH or higher NO2- concentration. AOB are highly enriched while nitriteoxidizing bacteria (NOB) are rarely found in partial nitritation process, and the order Nitrosomonadales of AOB is the dominant group and N2O producer. Anammox bacteria, AOB and certain amount of heterotrophic denitrifying bacteria are observed in the anammox process, the genus Denitratisoma and the heterotrophic denitrifying bacteria in the deep layer of anammox granules are the dominant N2O generation bacteria. In one-stage PNA reactors, anammox bacteria account for a large fraction of the biomass, AOB account for small portion, and NOB account for even less. The microbial community, diversity and N2O producers in one-stage PNA reactors are similar with those in two-stage PNA reactors. The dominant anammox bacteria, AOB and NOB in PNA are the species Candidatus Brocadia, the genera of Nitrotoga, Nitrospira and Nitrobacter, and the genus Nitrosomonas, respectively. The relations between N2O emission pathways and microbial communities need further study in the future.
2, 2, 6, 6-Tetramethyl-1-piperidinyl-N-oxyl (TEMPO) and its derivatives as stable radicals can participate in many reactions. During the process, TEMPO and its derivatives could act not only as the substrates to capture or initiate new radical intermediates to provide new compounds but also as organic catalysts or oxidants for transformations of alkenes, alcohols, aldehydes and so on to synthesize various high valueadded compounds. In this review, we would introduce recent advances of the transformations of different substrates mediated by TEMPO and its derivatives under transition-metal-free conditions.
No. 86 Xueyuan South Road, Haidian District, Beijing
010-62662699(Operation and Technical Support)
qkjq@cast.org.cn
Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House
