PDF
Full
Outline
In the paper, the typical rollover defect at edge on surface of stainless steel plate is studied. The morphology, microstructure and composition of cross section for rollover at edge are analyzed by metallographic microscope and scanning electron microscope. It is found that the rollover defect at edge has formed on hot rolled intermediate billet as well as micro morphology is the crack with opening pointing to edge and there is delamination for subscale, which is caused by uneven transverse deformation of metal in rolling process under high temperature condition. According to this, a type of formation mechanism of the defect is proposed. This defect could be reduced or even eliminated through effective prevention measures so that the impacts of it on yield of finished products could be reduced.
PDF
110
44
| 科 Family | 属数 Number of genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) | 属 Genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) |
|---|---|---|---|---|---|---|
| 鹅膏菌科Amanitaceae | 2 | 11 | 5.26 | 鹅膏菌属 Amanita | 10 | 4.78 |
| 小菇科 Mycenaceae | 2 | 12 | 5.74 | 丝盖伞属 Inocybe | 5 | 2.39 |
| 多孔菌科 Polyporaceae | 8 | 14 | 6.70 | 蜡蘑属 Laccaria | 5 | 2.39 |
| 红菇科 Russulaceae | 3 | 23 | 11.00 | 小皮伞属 Marasmius | 6 | 2.87 |
| 小菇属 Mycena | 11 | 5.26 | ||||
| 光柄菇属 Pluteus | 5 | 2.39 | ||||
| 红菇属 Russula | 17 | 8.13 | ||||
| 栓菌属 Trametes | 5 | 2.39 |
关闭全屏
No. 86 Xueyuan South Road, Haidian District, Beijing
010-62199257
qkjq@cast.org.cn
Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House
