Latest ArticlesIn this study, the osmotic pressure regulator dosage, the preservative type and dosage in sumatriptan succinate nasal spray as well as its pH value were optimized. Then, the safety of the preparation was evaluated by the bacteriostatic efficacy of benzalkonium chloride, the contents of related substances, rabbit nasal mucosa irritation and guinea pig allergic reaction. And the plasma concentration of sumatriptan in Beagle dogs was determined by LC-MS to assess pharmacokinetic behaviors of the self-made nasal spray and the reference preparation(Imitrex). The results showed that there were no significant differences in pH, osmotic pressure, related substances, and drug content per spray between the self-made sumatriptan succinate nasal spray and the reference preparation, and the product showed no irritation or allergy. After administration of the self-made and reference preparations, the cmax of sumatriptan in dogs were (319.7±149.0) and (296.0±84.5)μg/L, and the tmax were (0.75±0.3) and (0.89±0.63)h, respectively. The relative bioavailability of sumatriptan succinate nasal spray was 105.6%, indicating it was bioequivalent to the reference preparation.
In this study, carboplatin long-circulating liposomes A (20 mg/ml) and B (10 mg/ml) were prepared by passive drug loading, and their physicochemical properties were analyzed. The plasma drug concentration was determined by atomic absorption spectrometry to evaluate the pharmacokinetics in rats. The results showed that the prepared carboplatin liposomes had good dispersibility, fluidity and reproducibility, and the particle size was about 100 nm. The AUC of carboplatin long-circulating liposomes A and B were (1 667.87±642.98) and (1 359.43±583.61)h·mg·L–1, respectively, and the cmax were (96.72±27.21) and (63.04±22.15)mg/L, respectively, t1/2 were (15.02±5.72) and(22.90±5.64)h, which were significantly increased compared with the free drug group at the same dose. Carboplatin long-circulating liposomes can prolong the circulation time of the drug in the blood, which is beneficial to increase the drug concentration in the tumor tissue, thereby enhancing the curative effect. This study provided ideas and references for researching new carboplatin dosage forms.
In this study, lidocaine hydrochloride bilayer mucoadhesive buccal films were prepared by casting method, which was consisted of the drug-loading layer and the isolation film. Then, the title films were characterized by scanning electron microscopy and attenuated total internal reflectance Fourier-transform infrared spectroscopy. The mechanical properties, pH value, thickness, mass variation, adhesion time, content uniformity, disintegration time and in vitro dissolution of the films were investigated. The results showed that the tensile strength, elongation at break, pH value, thickness, mass variation, adhesion time, and disintegration time of the films were (4.4±0.3)MPa, (10.5±0.7)%,6.06±0.06, (0.105 2±0.012 8)mm, (0.105 0±0.007 0)g, (30±2)min and (3±1)min, respectively. The results of content uniformity also met the requirement. The taste-masking effect was achieved due to the addition of citric acid in the isolation layer.
The ultra-high performance liquid chromatography(UPLC) fingerprints of Longbishu (1) preparations were established. The methanol extract of 1 preparation was analyzed by UPLC. The Waters ACQUITY UPLC® HSS T3 column(2.1 mm×100 mm, 1.8 μm) was used, and the analysis was carried out in the gradient elution mode with 0.1% phosphoric acid solution as mobile phase A, and acetonitrile as mobile phase B. The flow rate was 0.2 ml/min, the column temperature was 30 ℃, and the detection wavelength was 221 nm. Twelve chromatographic peaks were identified as the common peaks of the control fingerprints of 1 capsules by the Chinese medicine chromatographic fingerprint similarity evaluation system, and nine common peaks were identified by comparing with the standard. Chemometric methods such as similarity analysis, principal component analysis and orthogonal partial least squares analysis were used to analyze thirty-nine batches of 1 capsules and tablets from different manufacturers. The results showed that there were certain differences between 1 capsules and 1 tablets. Among them, five common peaks(peaks 1, 8, 9, 10 and 11) were significantly different, reflecting the differences in the quality of malaytea scurfpea fruit and appendiculate cremastra pseudobulb used by different manufacturers when producing 1 preparations. The established method is simple, rapid, accurate and reproducible, which provides an experimental basis for the quality evaluation of 1 preparations.
The characteristic peaks of twenty common amino acids were determined by 1H NMR, and eighteen amino acids except cysteine(Cys) were rapidly identified in paediatric compound amino acid injection(18AA-Ⅱ). The interference of overlapping signals was excluded, and the specific proton signal was determined, which was verified by 13C NMR and heteronuclear single quantum coherence spectroscopy(HSQC) spectra to be accurate and effective. And tyrosine(Tyr) and acetyltyrosine(N-acetyl-Tyr) could be quantitatively determined using pyrazine as an internal standard, which provided a direct, rapid, simple and effective method for identifying multi-component amino acid preparations.
An inductively coupled plasma-mass spectroscopy(ICP-MS) method with matrix-matching method was established for the determination of twenty-four element impurities, namely Cd, Pb, As, Hg, Co, V, Ni, Tl, Pd, Ir, Os, Rh, Ru, Se, Ag, Pt, Li, Sb, Ba, Mo, Cu, Sn, Cr, and Au, in gadopentetate dimeglumine(1). The standard solution was prepared with gadolinium oxide(Gd2O3) as the matrix. The matrix effect was eliminated by the matrix matching method combined with the online multi-element virtual internal standard, and the polyatomic ion interferences were eliminated by the helium collision mode. The results showed that the linear correlation coefficients of twenty-four elements were all more than 0.99. The detection and quantification limits were all met the requirements of the ICH Q3D control threshold. The RSDs(n=6) of the repeatability tests were all less than 15%, and the average recoveries(n=9) were all in the range of 80% - 120%. The established method has high sensitivity and good accuracy, which can effectively eliminate the matrix effect and be used for the determination and risk assessment of twenty-four elemental impurities in 1.
An HPLC method was established for the determination of the genotoxic impurities: p-cyano-benzyl dichloride(2) and 4-[chloro(1H-1,2,4-triazol-1-yl)methyl]benzonitrile(3) in letrozole(1). The Alltima C18 column(4.6 mm×250 mm, 5 μm) was used, and the analysis was carried out in the gradient elution mode with water as mobile phase A, and acetonitrile as mobile phase B. The detection wavelength was 230 nm, the column temperature was 25 ℃, and the flow rate was 1.0 ml/min. The results showed that it was linear for 2 and 3 in the ranges of 0.014 8 -0.933 7 μg/ml and 0.028 6 - 0.871 5 μg/ml, respectively. And the average recoveries(n=9) of 2 and 3 were 99.9% and 98.9%, with the RSDs of 0.59% and 0.52%. The established method has good accuracy and high sensitivity, which is suitable for the detection of the genotoxic benzyl chlorides in 1.
The average degree of substitution(DS) of sulfobutyl ether β-cyclodextrin sodium(SBE-β-CD) was measured by nuclear magnetic resonance spectroscopy, which was taken as the standard value of DS. Then, the infrared spectra of β-cyclodextrin(β-CD) and SBE-β-CD were collected and analyzed by peak assignment to determine the detection wavenumber and the control wavenumber. The linear relationship between the absorbance ratio of the detection wavenumber to the reference wavenumber and the standard value of DS was established according to Lambert-Beer law. Finally, the established DS determination method based on infrared spectroscopy was evaluated. The results showed that the detection wavenumber was about 1 204 cm–1, and the control wavenumber was about 1 081 cm–1. And the linear relationship between absorbance ratio and DS was good. The external corroboration results showed that the DS measured by infrared spectroscopy was basically consistent with the standard value of DS obtained by nuclear magnetic resonance spectroscopy, and the DS results measured by different types of infrared spectrometers were basically the same, which provided a theoretical basis for DS determination of cyclodextrin derivatives.
A salting out-headspace gas chromatography method was established for the determination of migration of the ink residual solvents, namely butanone(2), methyl isobutyl ketone(3) and n-butyl alcohol(4), from in three-layer co-extrusion infusion bag in compound electrolyte glucose injection(1). The HP-INNOWAX column(60 m×0.32 mm×0.50 μm) and hydrogen flame ionization detector were used, the column flow rate was 1.2 ml/min, and the injection port temperature was 200 ℃. Anhydrous sodium sulfate(2.5 g) as the salting-out agent was added to the headspace vial. The results showed it was linear for 2, 3 and 4 in the corresponding concentration ranges, the detection limits were 0.006, 0.002 6, 0.012 μg/ml, and the average recoveries(n=3) were 100.9%, 104.4%, 96.1%, with the RSDs of 4.1%, 6.2%, and 6.2%, respectively. The established method has good specificity, high sensitivity and simple operation, which can be used to determine the migration of 2, 3 and 4 in 1.
Seven crystalline forms of aripiprazole were prepared in this study, namely two medicinal forms(the hydrate and form Ⅲ) and nonmedicinal forms(Ⅰ, Ⅱ, Ⅳ, Ⅴ and hemiethanolate). The polymorphisms of aripiprazole can be obtained by recrystallization from a single solvent or a mixed solvents or heating at different temperatures, and they were characterized by powder X-ray diffractometry(PXRD), differential scanning calorimetry(DSC), thermogravimetric analysis(TGA) and polarizing microscopy. In this paper, three new preparation methods were developed. The experimental results showed that the monohydrate and the hemiethanolate could be transformed into form Ⅲ after heating, while forms Ⅲ, Ⅳ and Ⅴ could be transformed into formⅠby heated directly at different temperatures. In addition, these transformations did not result in the formation of the related substances.