Home Latest Articles
Latest Articles
  • Yu YAO, Huaqing LIN, Jiaqi ZHANG, Hanbing LIU, Cheng PENG
    Chinese Journal of Pharmaceuticals. 2023, 54(1): 93-100.

    Based on the concept of Quality by Design, the quality target product profile(QTPP) and critical quality attributes(CQAs) of the self-made generic-retentive sustained-release tablets were defined with the marketed pregabalin sustained-release tablets as the reference listed drug. The amounts of a blend of polyvinyl acetate and povidone(Kollidon SR), polyoxyethylene, carbomer and crospovidone were optimized by single factor test combined with central composite design-response surface methodology with floating lag time, long floating duration and cumulative release rates at different sampling points(1, 4 and 24 h) as the dependent variables. By drawing the three-dimensional response surface plots, the optimized formulation parameters were obtained as follows: 19.25% of Kollidon SR, 15.50% of polyoxyethylene, 3.25% of carbomer, and 31.50% of crospovidone. The cumulative release rates at 1, 4 and 24 h of the optimized formulation were respectively 17.12%, 43.73% and 97.19% in the validation test, and the release behaviors between the self-made tablets and the resfecence listed drug were similar. The floating lag time was 30 s and long floating duration was over 10 h, indicating the floating characteristics of the self-made tablets met the design requirements.

  • Huanhuan LU, Fei WU, Lan CHEN, Donghao CHEN
    Chinese Journal of Pharmaceuticals. 2023, 54(1): 101-110.

    Despite cascade impactors have similar design principles, different impactors do not always provide comparable data for the same product in some cases due to their diverse internal structures. This study aimed to investigate the cause of the differences in the results derived from the three different impactors testing a carrier-based dry powder inhaler(DPI) at different sampling inhalation volumes, and discuss the applicability of the three impactors in in vitro-in vivo correlation(IVIVC) studies. The formulation was prepared by mixing micronized chlorpheniramine maleate with coarse lactose carrier particles, and Breezhaler® was adopted as the inhalation device. The measurement was performed at the flow rate of 60 L/min using fast screening impactor(FSI), Andersen cascade impactor(ACI), and next generation impactor(NGI) at five sampling volumes of 0.5, 1, 2, 4 and 5 L, respectively. The results indicated that the minimum sampling volumes to ensure accurate delivery performance assessment of the DPI by FSI, ACI and NGI were 1, 2 and 2 L, respectively. However, when the sampling volumes were less than 2 L, the FSI provided more reliable results reflecting the real dispersive condition of the formulation delivered by Breezhaler®, while the ACI presented a relatively complete particle size distribution. When the sampling volumes were no less than 2 L, the fine particle dose(FPD) measured by the NGI was almost the same as that measured by the FSI. Nevertheless, a significant difference in FPD values was observed between the ACI and the other two impactors, which might relate to the considerable interstage losses in the ACI. This study might provide a reference for selecting and applying different impactors in the DPI in vitro evaluation and the possible IVIVC model establishment.

  • Wei ZHANG, Hui ZHANG, Jing XIONG, Mingzhe XU, Chenggang LIANG
    Chinese Journal of Pharmaceuticals. 2023, 54(1): 111-117.

    The equilibrium solubility, oil-water partition coefficient and permeability values of oseltamivir phosphate(2) and sofosbuvir(3) were determined. The equilibrium solubilities of 2 and 3 in buffer solutions of pH 1.2, pH 4.5 and pH 6.8 were determined by flask shaking method to judge the solubility properties of two drugs. The oil-water partition coefficients of 2 and 3 in octanol-buffer solutions with different pH values were measured. The permeabilities of 2 and 3 in pH 5.0, pH 6.5 and pH 7.4 buffer solutions were measured by parallel artificial membrane permeation assay(PAMPA). The results showed that 2 was a drug with high solubility and permeability characteristics, and the oil-water partition coefficient was greatly affected by the volume ratio of oil to water. And 3 was a drug with low solubility, high permeability and high lipid solubility characteristics. However, the solubility of methyldopa(1) could not be determined by the same method due to the problem of sample stability. In addition, this study described and analysed the possible problems and influencing factors in the research process, which provided the data to support the establishment of the WHO list of essential medicines.

  • Dan LI, Dongmei SONG, Jian LE
    Chinese Journal of Pharmaceuticals. 2023, 54(1): 118-123.

    In order to better control the qualities of sodium cromoglicate(1) and its eye drops, the related substances were determined by HPLC with reference to European pharmacopoeia(EP 10.0). The results showed that the total amount of related substances in eighteen batches of samples was 0.2% - 0.4%, and the impurity content of the samples increased in the oxidation environment. According to the 2020 edition of the Pharmacopoeia of the People’s Republic of China(ChP 2020), the solution color was visually inspected. The results showed that the color of 1 eye drops was inconsistent with the "colorless or almost colorless" described in the current pharmacopoeia. In addition, the molar concentration ratio of osmotic pressure of 1 eye drops was determined. The results showed that eight out of fifteen batches of samples could not meet the isotonic requirements, and the lowest value of the osmolality ratio was only 0.26. The properties, solution color, osmotic molar concentration and related substances were added and revised, which could control the product quality more effectively, and also provide a reference for the improvement of other drug standards and the formulation of pharmacopoeia standards.

  • Xiaojing SU, Jianhua YAN, Min PAN, Yanyue LIU, Yu LIU
    Chinese Journal of Pharmaceuticals. 2023, 54(1): 124-130.

    The dissolution method of bedaquiline fumarate(1) tablets with good discrimination was established. By investigating the equilibrium solubility of 1 in various pH media, it was confirmed that 1 possesses a pH-dependent solubility in the physiological pH range. On this basis, with difference factor(f1) as the evaluation index, and the tablet disintegration property as the auxiliary index, the most discriminating dissolution method was selected by determining the dissolution curves of the self-developed preparations prepared with different particle sizes of 1 in each dissolution medium, that is, the basket method was adopted with pH 1.0 hydrochloric acid as the dissolution medium, the rotation speed was 100 r/min, and the medium volume was 900 mL. The established and optimized dissolution method can effectively distinguish the self-developed preparations with different quality attributes, which provides an effective reference for the development of this variety of generic drugs.

  • Sijin WANG, Jing CHU, Shihong MA
    Chinese Journal of Pharmaceuticals. 2023, 54(1): 131-134.

    In this paper, spores of Geobacillus stearothermophilus were inoculated to different solutions, and their heat resistances(D values) were determined by the survivor curve method. The results indicated that D values of spores of Geobacillus stearothermophilus in purified water, trypticase soy broth(TSB) medium, 5% glucose injection, and sodium bicarbonate injection were 3.26, 3.61, 0.97, and 2.94 min, respectively. So, differences in heat resistance of spores in different solutions should be generally considered when selecting spores and biological indicators, and the inoculum size should be calculated by D values to get more accurate biological lethality in the biological qualification of sterilization validation, and keep enough safety margin for the thermal lethality in order to provide sufficient sterility assurance level in the sterilization process performance qualification of the parenteral drugs.

  • Cuixia YAN, Ying ZHANG, Zhen SUN, Gang CHEN, Luxia ZHENG, Hong SHAO
    Chinese Journal of Pharmaceuticals. 2023, 54(1): 135-140.

    An ion chromatographic method was established for the simultaneous determination of trifluoroacetic acid(2) and acetic acid(3) in atosiban acetate(1) bulk drug and its injection. The Dionex IonPacTM AS23 anion column(4 mm×25 cm, 5 μm) was adopted, and the 1.0 mmol/L sodium bicarbonate solution and 4.0 mmol/L sodium carbonate solution were used as eluents. The flow rate was 1.0 mL/min, the column temperature was 30 ℃, and the injection volume was 25 μL. The results showed that it was linear for 2 and 3 in the ranges of 0.03 - 11.53 μg/mL and 0.01 - 0.20 mg/mL, respectively. The LOQs of 2 and 3 were 1.4 and 5.1 ng, and the LODs were 0.7 and 2.5 ng, respectively. The average recoveries(n=6) of 2 and 3 in 1 bulk drug were 100.9% and 101.8%, with the RSDs of 0.60% and 0.74%, respectively. The average recoveries(n=6) of 2 and 3 in 1 for injection were 100.4% and 101.5%, with the RSDs of 0.86% and 0.53%, respectively. The established method is accurate, sensitive and reproducible, which can provide a scientific basis for the dosage control of 2 in 1 and the simultaneous determination of 2 and 3 in 1.

  • Shoushuai QIU, Chenlin HUA, Lingfen XU, Dongmei ZHAO, Qingfang CHENG
    Chinese Journal of Pharmaceuticals. 2023, 54(1): 141-147.

    An HPLC method for the simultaneous determination of twelve related substances(2 - 13) in rosuvastatin calcium(1) was established. The Welch C18 column(4.6 mm×250 mm, 5 µm) was used, and the analysis was carried out in the gradient elution mode, with a solvent mixture comprising of 1% trifluoroacetic acid in water, acetonitrile and water(1∶35∶65, volume ratio) as mobile phase A, and a solvent mixture comprising of 1% trifluoroacetic acid in water, acetonitrile and water(1∶90∶10, volume ratio) as mobile phase B. The detection wavelength was 242 nm, the flow rate was 1.0 mL/min, and the column temperature was 40 ℃. The results showed that the resolution between 1 and its related substances was greater than 1.5, and it was linear for 1 - 13 in the corresponding mass concentration ranges. The LODs of 1 - 13 were 0.028 95 - 0.060 21 µg/mL, and the LOQs were 0.096 50 -0.200 71 µg/mL. The average recoveries(n=9) of 2 - 13 were 94.59% - 102.00%, with the RSDs of 0.79% - 4.06%. The determination results of three batches of 1 bulk drug showed that the contents of all related substances were less than 0.1% and the total impurity content was less than 1.0%, except related substance 3, whose content was less than 0.2%. The established method has good resolution, high sensitivity and specificity, which is suitable for the determination of related substances in 1.

  • Wei CHEN, Siyi GE, Yiming XU, Mingyang WU, Yi LIANG
    Chinese Journal of Pharmaceuticals. 2023, 54(1): 148-153.
  • Qinyi SUN, Bin JIANG, Lingling LIU
    Chinese Journal of Pharmaceuticals. 2023, 54(1): 154-159.
News