Home Latest Articles
Latest Articles
  • Lili ZHAO, Wenpeng ZHAO, Yongliang XU, Guimin ZHANG, Yu CAO, Zhong LIU
    Chinese Journal of Pharmaceuticals. 2023, 54(3): 366-373.

    The signal regulatory protein α(SIRPα)-mFc expression plasmid constructed by molecular biological technique was transfected into Chinese hamster ovary(CHO) cell lines in order to express SIRPα-mFc protein. The BALB/c mice were immunized with SIRPα-mFc protein antigens, then the spleen cells of the immunized BALB/c mice were fused with SP2/0 myeloma cells. After multiple rounds screening through enzyme linked immunosorbent assay(ELISA) and flow cytometry, seven monoclonal antibodies targeting SIRPα protein were obtained. Two of the seven clones named 40F3 and 57B10 showed higher binding activity, the median effective concentration(EC50) of 40F3 and 57B10 were 5.866 and 5.457 ng/mL, and the half maximal inhibitory concentration(IC50) were 65.31 and 63.29 ng/mL, both were better than the commercial product SE5A5(anti-SIRPα/β antibody, EC50=22.47 ng/mL, IC50=121.2 ng/mL). The affinity activity level tested of these two clones were 1×10–11, and the antibodies 40F3 and 57B10 could not bind to SIRPg protein, which provided a reference for the subsequent antibodies humanization and preclinical studies.

  • Hongyue GANG, Kaoxiang SUN, Huimin SUN
    Chinese Journal of Pharmaceuticals. 2023, 54(3): 374-382.

    The differences in structure and functionality-related characteristics of croscarmellose sodium(CCS) from different sources at home and abroad were investigated, and their moisture absorption behaviors were characterized. Then, the orthogonal partial least squares(OPLS) model was established to analyze the impacts of the quality of CCS on the disintegration time and dissolution of domperidone tablets. The results showed that the degree of substitution, crosslink density, particle morphology, particle size, swelling, settling volume, powder fluidity and water uptake rate of CCS from different sources were different. The particle morphology and particle size would affect the powder fluidity. The proportion of basic substituents would affect the water absorption of CCS. Swelling, settling volume, degree of acidic substitutions, degree of basic substitutions, inter-particle porosity, crosslink density, d(0.5) and moisture content of CCS from different sources had a large effect on the disintegration time and dissolution of domperidone tablets. Therefore, the analysis of structural and functionality-related characteristics of CCS from different sources will help to provide a basis on selecting the appropriate excipients for formulation design.

  • Xie GAO, Dawei HUANG, Qin REN, Yi LIU
    Chinese Journal of Pharmaceuticals. 2023, 54(3): 383-394.

    In this study, texture analysis method of load-distance curve was applied to evaluate the gel strength of hydroxypropyl methylcellulose(HPMC)-based hydrophilic matrix tablets prepared by twin-screw wet granulation(TSWG) or high shear wet granulation (HSWG). The results revealed that the increase of methoxy(MeO) substitution degree and relative molecular weight of HPMC, and the decrease of particle size have positive contributions to gel strength of matrix tablets. Moreover, TSWG process parameters(liquid/solid ratio, feeding rate, screw speed) and HSWG process parameters(granulating time, impeller speed, chopper speed) on the thickness of surface gel layer and anti-wettability of inner cores were investigated through Box-Behnken design. The potential influence of granulation process on gel strength was analyzed in combination with particle size and tablet morphology, hoping to provide some references for a more comprehensive development pathway for hydrophilic matrix tablets.

  • Zhiyuan DING, Juan YANG, Yan XIE
    Chinese Journal of Pharmaceuticals. 2023, 54(3): 395-403.

    To improve the solubility and dissolution of the total flavones of Epimedium(1), three kinds of nanosuspensions(1-NSps) were respectively prepared by miniaturized media milling method and precipitation-high pressure homogenization method with sodium dodecyl sulfate(SDS) and polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer(Soluplus). The characterization results showed that the particle sizes of the three 1-NSps were all below 200 nm and the products were all physically stable at 4 ℃. Moreover, the molecular structure of each compound was not changed after preparation of 1-NSps. The peak height and crystallinity of some crystalline compounds in 1 was weakened in the nanosuspension stabilized by Soluplus, but they existed in amorphous forms in the nanosuspension stabilized by SDS. The saturated solubilities of icariin and icariside Ⅱ in the three 1-NSps were related to the stabilizer species. Compared with the raw 1, the dissolution rate and degree of total flavonoids in the three 1-NSps were significantly increased, and their dissolution rates in water at 180 min were 75.77%, 76.26% and 84.36%, respectively. The dissolution amount from the product obtained by precipitation-high-pressure homogenization method was more complete than those from the products prepared by miniaturized media milling method.

  • Lili FU, Liping WEI, Yan WANG, Yunliang QIU
    Chinese Journal of Pharmaceuticals. 2023, 54(3): 404-410.

    Letrozole(1), a third-generation nonsteroidal aromatase inhibitor, has been widely used to treat peripheral precocious puberty, congenital adrenal hyperplasia, and short stature. However, the safety assessment of 1 in the pediatric population need to be improved. In this study, juvenile SD rats were used as models to evaluate the developmental toxicity of 1. Juvenile SD rats were intragastrically administrated of 1 for 28 days, and the changes in clinical signs, body weight, learning and memory function, histopathology, reproductive function, sex hormones, and bone metabolism indexes were evaluated. The results showed that compared with the control group(treated with 0.5% of carboxymethylcellulose solution), there were no significant influences in clinical signs, body weight, learning and memory function, and C-terminal telopeptides of type Ⅰ collagen of jurenile rats treated with 1. However, the testosterone level in testicular tissue of male rats treated with 1 at high dosage of 135 mg/kg was significantly increased. The estradiol level in the ovary, organ coefficient of the uterus in female rats treated with medium- and high-dose (1.5 and 15 mg/kg) of 1 were significantly decreased, and uterine atrophy was observed. Moreover, the significant increase of atresia follicles and decrease of c-Kit level in oocytes were observed in all groups of female rats treated with different doses (0.15, 1.5 and 15 mg/kg) of 1. In conclusion, 1 could affect the reproductive function of female juvenile rats and the androgen level of male juvenile rats, which was mainly related to the action mechanism of 1.

  • Shiyou CHEN, Yule ZHANG, Ying SHEN, Xiaoyun LIU, Hong YUAN
    Chinese Journal of Pharmaceuticals. 2023, 54(3): 411-416.

    A distinguishable dissolution method for flunarizine hydrochloride(1) capsules was established, and the similarity of dissolution curves between the self-developed generic preparation and the reference preparation was evaluated. By adjusting the rotation speed of basket method and/or adding different concentrations of Tween-80, the dissolution test conditions of each medium were optimized, and the dissolution curves of 1 capsules in different media were investigated. The results showed that the dissolution curves of 1 capsules in hydrochloric acid(pH 1.2, 50 r/min), acetate buffer solution(pH 4.5, 100 r/min), phosphate buffer solution containing 0.15% Tween-80(pH 6.8, 100 r/min) and 0.10% Tween-80 aqueous solution(100 r/min) were distinguishable. The dissolution rates at 15 min of 1 capsules in hydrochloric acid were all no less than 85%, and the similarity factor(ƒ2) values between dissolution curves in other media were no less than 50, which indicated that the dissolution behavior of 1 from the generic and reference preparations in above media was basically the same.

  • Mingyan YU, Song WANG, Wenkun LIU, Haiyun ZHAO, Dejun CHEN
    Chinese Journal of Pharmaceuticals. 2023, 54(3): 417-423.

    The contents of related substances in glipizide tablets from different manufacturers were determined in this paper. And the results showed that active pharmaceutical ingredient(API) from different sources in the tablets would significantly affect the related substance contents. Different recrystallization solvents(methanol or ethanol) used in the API preparation process would lead to the differences in contents of impurities G and J in the API, which in turn affected the tablet quality. Further studies showed that the recrystallization solvent had a certain influence on the crystal form, particle size distribution and micromorphology of the API, as well as the compatibility with the tablet excipients. The tablet excipients used by some companies were incompatible with APIs according the results of differential scanning calorimetry, and it was recommended that relevant enterprises should avoid using excipients with compatibility risks in the production process of glipizide tablets.

  • Min YANG, Liang XU
    Chinese Journal of Pharmaceuticals. 2023, 54(3): 424-428.

    The content of ezetimibe(1) polymorph in solid dispersion was determined by differential scanning calorimetry. By adding different proportions of polymorph drug into the excipients, the sold dispersion samples with different contents of polymorph drug were prepared. The linear relationship between the enthalpy value of its endothermic peak and the content of polymorphs was established. The validation of the detection method was completed, and the quantitative analysis of the content of polymorph in solid dispersion was realized. The results showed that there was a good linearity between the content of polymorph and the enthalpy value of endothermic peak when the content range of polymorphs in 1 solid dispersion was 0.5% - 10%. The established method has good precision, which can be used as a method for quantitative analysis of transforming amorphous drugs into polymorph drugs in 1 solid dispersion, and also provide a reference for the preparation and quality evaluation of 1 solid dispersion.

  • Liwen MA, Yanqing GONG, Gang LI, Yuying MA, Hanbin SHAN, Jialiang ZHONG
    Chinese Journal of Pharmaceuticals. 2023, 54(3): 429-437.

    The cocrystal of clarithromycin-succinic acid was obtained by solvent evaporation method and its single crystal X-ray diffraction structure was solved. The results showed that there were hydrogen bonds between clarithromycin and succinic acid in crystalline state, and the two components formed the cocrystal instead of the salt. One methanol molecule and a half water molecules were also participated into the formation of hydrogen bonds, and multiple groups of hydrogen bonds strengthened the stable stacking arrangement of molecules in the crystalline state.

  • Bixiao ZHU, Cuilong CHEN
    Chinese Journal of Pharmaceuticals. 2023, 54(3): 438-445.

    This study aimed to improve the intrinsic safety level of centrifugal solvent extraction systems in the production of active pharmaceutical ingredients(API). According to the material characteristics and regulatory requirements, this paper systematically described the design, calculation, key equipment selection and supporting facilities selection of centrifugal solvent extraction system with the typical application in purification of vitamins and prostaglandin, and emphatically introduced the design of nitrogen charging and oxygen measuring system under the condition of phase equilibrium. The results showed that the yield of vitamin was more than 96.6% and the contents of impurities were reduced to less than 0.7%. Meanwhile, reasonable suggestions which could be used as a reference for the application of centrifugal solvent extraction system in API production were put forward according to the new problems of the development of centrifugal extraction equipment technology.

News