Home Latest Articles
Latest Articles
  • Jian LIANG, Yi WU, Danzheng LIU, Long XU, Xiong SHEN
    Chinese Journal of Pharmaceuticals. 2023, 54(11): 1601-1606.

    The study utilized a fluidized bed method to prepare Sheyin pharyngitis granules. The Box-Behnken design was used to optimize the process parameters, with the fluidized bed atomization pressure, fluidization temperature, and spray liquid rate as the investigation indicators, and the qualification rate(namely the proportion of the granules with the particle size of 180 - 2 000 μm to total granules) and dissolution time as the evaluation indicators. Additionally, the high-performance liquid chromatography method coupled with a diode array detector(HPLC-DAD) was established to determine contents of chlorogenic acid, harpagide, harpagoside and irisflorentin in the granules. The results indicated that the optimized process parameters were as follows: an atomization pressure of 22 kPa, an inlet air temperature of 66 ℃, and a spray liquid rate of 1.55 mL/min. The qualification rate and dissolution time of the obtained granules were 91.51% and 42.87 s, respectively. The contents of chlorogenic acid, harpagide, harpagoside and irisflorentin in the granules were 3.22, 0.72, 0.63 and 0.16 mg/g, respectively.

  • Zepeng RAO, Hexiang JIN, Luping TU, Yujie ZHAO, Wenxi WANG
    Chinese Journal of Pharmaceuticals. 2023, 54(11): 1607-1613.

    A high drug-loading solid dispersion of nimodipine was prepared via a hot-pressing extrusion method by mixing the bulk drug and a polymer carrier in a mass ratio of 4∶1. The process parameters, namely the carrier material type, rotational speed of the extrusion machine, extrusion temperature, and preparation method, were optimized with the dissolution behavior of the product in hydrochloric acid(pH 1.0) as the evaluation indicator. The results showed that the high drug-loading solid dispersions with Eudragit® EPO as the carrier prepared at 80 ℃ which was far below the melting point of nimodipine and the rotational speed of 30 r/min by hot-pressing extrusion method could significantly improve the dissolution of nimodipine. The dissolution rate at 15 min was over 80%. The characteristic results of differential scanning calorimetry, powder X-ray diffraction, particle size determination and scanning electron microscopy showed that nimodipine was existed in the form of nanocrystals in the solid dispersion. In the accelerated test, nimodipine in the solid dispersion changed from crystal form Ⅰ to crystal form Ⅱ, but the dissolution behavior in vitro remained basically unchanged.

  • Chunyan DU, Yuqing ZHANG, Hongyan XING, Qi ZHAO, Yizhe ZHANG, Xijie WANG
    Chinese Journal of Pharmaceuticals. 2023, 54(11): 1614-1623.

    Due to the temperature sensitivity of some ion channel drugs, the testing temperature might be an important influencing factor in their safety evaluation. Therefore, this study compared the effects of some drugs on the voltage-gated sodium channel(Nav1.5) under different temperature(29, 33, 35, and 37 ℃)] conditions. The whole-cell patch clamp technique was used to record the changes in sodium channel current(INa) after the temperature-sensitive drugs(mexiletine, quinidine, and ranolazine) functioned on Nav1.5-human embryonic kidney(HEK) 293 cells at different temperatures. The study investigated the influence of temperature on the concentration-dependence of INa and the half-maximal inhibitory concentration(IC50) of the aforementioned drugs. The results showed that mexiletine, quinidine, and ranolazine could inhibit INa in a concentration-dependent manner at different temperatures(29, 33, 35, and 37 ℃). Compared to 29 ℃, the inhibitory effects of these drugs on INa was more significant at 35 ℃. This study evaluated the effects of three drugs on the sodium channel Nav1.5 under four temperature conditions, which was benefit to improve the accuracy of preclinical cardiac toxicity screening and evaluation of drugs, providing a reference for GLP institutions to conduct ion channel drug evaluation tests.

  • Jiajing LI, Xuemei WEN, Ju LIU, Hongjuan PAN
    Chinese Journal of Pharmaceuticals. 2023, 54(11): 1624-1635.

    The peptide mapping and disulfide linkages of ranibizumab(including one batch of reference preparation and two batches of samples) were simultaneously characterized by the online partial reduction of tris-(2-carboxyethyl)phosphine(TCEP) after a single injection by LC-MS/MS for the first time. The results showed that the sequence coverage of peptide mapping could reach 100%, and the identified post translational modifications were mainly oxidation, deamidation and pyroglutamic acid cyclization. The five pairs of disulfide bonds were confirmed to be consistent with the theoretical connection. In addition, free cysteine and three pairs of scrambled disulfide bonds were identified by this method, and the probability of artifacts could be effectively reduced by adding a certain amount of alkylation reagents. This online method shortened the processing and analysis time, reduced the uncontrollable factors introduced by humans, and provided references for high-throughput antibody structure characterization.

  • Jinhua XU, Lili ZHAO, Changqing LIU, Guimin ZHANG, Zhong LIU
    Chinese Journal of Pharmaceuticals. 2023, 54(11): 1636-1645.

    The complex disulfide crosslinking structure of recombinant hirudin protein was analyzed by joint enzyme digestion with UPLC Q-TOF high resolution mass spectrometry. It was verified whether the recombinant hirudin protein contained free cysteine from the protein level by high resolution mass spectrometry and the free thiol quantitative detection. Then, single enzyme method was used to label the position of each or each group of disulfide bonds in the protein sequence. Finally, according to the results of the single enzyme, the specific disulfide bond pairing method was designed and verified by dithiothreitol reduction method, and the disulfide bond position of recombinant hirudin protein was finally confirmed. It was showed that there were ten cysteine residues included in recombinant hirudin protein sequence, they could establish five pairs of disulfide bonds, including Ṩ1(Cys1-Cys2), Ṩ2-Ṩ3(Cys3-Cys5/Cys4-Cys6 or Cys3-Cys6/Cys4-Cys5), Ṩ4(Cys7-Cys9) and Ṩ5(Cys8-Cys10).

  • Lanyan FAN, Yongqi GAN, Jun NONG, Huimin TAN, Bin ZHU
    Chinese Journal of Pharmaceuticals. 2023, 54(11): 1646-1651.

    Qipi pills, a traditional Chinese medicine formulation composed of raw medicinal herb powder, are highly susceptible to microbial contamination. In this study, 149 batches of samples from 10 different manufacturers were tested in accordance with current standards and the results were analyzed. Subsequently, exploratory research was conducted to establish a microbial limit detection method for Qipi pills. The detected microorganisms were identified using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry(MALDI-TOF-MS) or 16S rRNA gene sequencing technology, and their microbial contamination status was assessed. The results revealed that all 149 batches of samples complied with the regulations upon microbial limit inspection. The established microbial limit inspection method for Qipi pills was 1∶20 for total aerobic bacteria count, 1∶10 for total mold and yeast count, while standard methods were employed for specified microorganisms including Escherichia coli, bile salt-tolerant Gram-negative bacteria, and Salmonella. Among the identified contaminating bacteria, 90% were Bacillus spp., suggesting an enhancement in process control over microorganisms by manufacturers was necessary.

  • Chengcheng ZHANG, Cuiping LIU, Xiaoguang LI, Hongjuan PAN
    Chinese Journal of Pharmaceuticals. 2023, 54(11): 1652-1659.

    An HPLC-charged aerosol detector(CAD) method for the analysis of the related substances of 1,2-dierucoyl-sn-glycero-3-phosphocholine(1), dimyristoyl phosphatidylethanolamine(2) and dipalmitoyl phosphatidylglycerol(3) was established respectively, and the main phospholipid degradation impurities of three synthetic phospholipids were identified as Sn-1-lysophospholipids, Sn-2-lysophospholipids and fatty acids by LC-MS method and specialized phospholipase A1 combined with ACD/Labs software(version 2021), and identified in which the Sn-1-lysophospholipids was found as the dominant degradation product. The results provided a reference for the quality control and preparation process of synthetic phospholipid pharmaceutical excipients.

  • Lu TANG, Xuyan LIU, Weiwei WANG, Wei WANG, Feng NI, Jianqi LI
    Chinese Journal of Pharmaceuticals. 2023, 54(11): 1660-1662.

    A GC method was established for the determination of the five residual organic solvents(tetrahydrofuran, ethanol, acetonitrile, pyridine, N, N-dimethylformamide) and a related substance(1,3-propanediol) in perampanel raw materials. Tetrahydrofuran, ethanol, acetonitrile, pyridine, N, N-dimethylformamide and 1,3-propanediol were quantitatively determined by direct sampling on DB-WAX column, with DMSO as the solvent and temperature programmed control. The above five organic solvents and 1,3-propanediol were completely separated. Their average recoveries were 97.65% - 112.88%, with RSDs less than 5.0%. In the linearity test, good linear relationships between peak areas and mass concentrations of the analytes were achieved, and all the correlation coefficients were more than 0.998.

  • Ye CHEN, Xinyue LIU, Xiaomi DING, Jinxi DING
    Chinese Journal of Pharmaceuticals. 2023, 54(11): 1663-1670.
  • Jinwei WANG, Lixin WANG, Houming XU, Qingfeng FAN, Zheng ZHANG
    Chinese Journal of Pharmaceuticals. 2023, 54(11): 1671-1675.
News