Latest ArticlesA UPLC-QTOF-MS method was established to analyze the chemical constituents of Fufang Dengtaiye tablets. Based on the mass spectrometry data, reference substances, and literature reports, a total of 52 constituents were identified or speculated. The chemical material basis was composed of 12 alkaloids, 13 terpenoids, 14 flavonoids, 3 phenolic acids, and 10 other chemical constituents(e.g., stilbenes and organic acids). The phenol red-induced tracheal excretion mouse models, ammonia-induced mouse cough models, and histamine phosphate combined with acetylcholine chloride-induced guinea pigs asthma models were established to evaluate the expectorant, antitussive and anti-asthmatic effects of Fufang Dengtaiye tablets. The results showed that compared with the model group, the medium- and high-dosage(2 and 4 g/kg)group of Fufang Dengtaiye tablets could significantly increase the secretion of phenol red, prolong the cough incubation period, reduce the number of cough in two minutes of mice(P<0.05, P<0.01), and increase asthma incubation period of guinea pigs. This study elucidated the chemical constituents of Fufang Dengtaiye tablets and its expectorant, antitussive and antiasthmatic activities, which provided a experimental basis for its quality control and clinical application.
In order to investigate the physical stability of the microspheres in microsphere specialized solvents during the suspension process, a method for evaluating the suspension effect of the microsphere specialized solvent was conducted based on the principle of multiple light scattering. The results showed that within 10 min of testing, the suspension effects of two microsphere specialized solvents on the same kind of microspheres could be distinguished.The Turbiscan backscattering curves of the suspension formed by the solvent with good suspension performance and microspheres did not change, indicating that no aggregation, precipitation, flocculation or emulsification occurred in the suspension. This study proposed a new research method for investigating the suspension effect(stability) of microsphere specialized solvents. Compared with the traditional methods, this method could more intuitively distinguish the suspension effect of microsphere specialized solvents, and it was simple and convenient to operate, making it of certain reference value in the development of microsphere formulations.
Voclosporin is a novel calcineurin inhibitor that has been included in the third batch of the encouraged generic drug list. This study developed a separation and purification process for voclosporin based on macroporous resins, and optimized the type of macroporous resins and purification process parameters. The optimal conditions were as follows: using Resin No. 3, preparing voclosporin sample solution(0.1 g/mL) with 50% ethanol aqueous solution, maintaining an sampling flow rate of 20 mL/h, a loading volume of 30 mL, employing 50% - 70% ethanol as eluent, and utilizing the acetone-water mixture in a volume ratio of 3∶3 as crystallization solvent. This optimized process consistently yielded voclosporin with purity over 99.2% and purification recovery of 60%. These results demonstrated the high efficiency, stability, and reproducibility of the developed method, providing a viable and effective purification strategy for industrial production of voclosporin.
Characterization and immigration research on the leachables from the butyl rubber plugs of iohexol(1)injection was carried out by extractables research and accelerated immigration research with HPLC-UV and GC-MS technologies. By comparing the retention time in HPLC and GC chromatograms, UV spectrum and mass spectrum of the chromatographic peak with xylene(2) reference substance, the extractables 2 from butyl rubber plugs was characterized.The accelerated immigration research conformed that the unknown compound found in 1 injection was 2, which leached from the butyl rubber plugs. An HPLC method was established to detect the leaching amount of 2 in commercially available 1 injection, and the leaching degree of 2 was predicted by the accelerated immigration test. The results showed that after being placed upside down at 60 ℃ for 15 days, the leaching amount of 2 in 1 injection(specification: 20 mL) could reach 56 μg, which provided a reference for the study of the leachables of 1 injection.
A polymerase chain reaction(PCR) method was established for four pathogenic bacteria(Staphylococcus aureus, Pseudomonas aeruginosa, Candida albicans, Salmonella) on non-sterile medical devices. Selecting common bacterial strains in the microbial limit laboratory as control bacteria for each other, the identification of four pathogenic bacteria was completed in one experiment by designing specific sequence primers for different strains. The applicability of this method was determined by evaluating its specificity and minimum detection limit, and compared it with time-of-flight mass spectrometry and traditional identification methods. This method can determine the presence of four pathogenic bacteria in a sample based on whether the target gene has been amplified and the melting temperature value of the amplified product, which provide a rapid detection method for pathogenic bacteria in production and testing.
As environmentally benign and sustainable technologies, enzyme immobilization and continuous flow synthesis have been widely applied to organic synthesis. In recent years, immobilized enzyme based flow biocatalysis has received increasing attention and application, because it possesses the integrated advantages of the both. Ketoreductase-catalyzed asymmetric reduction of prochiral ketones is one of the most effective methods for the synthesis of chiral alcohols.This paper summarizes the research progress of immobilized ketoreductase in continuous flow synthesis, and provides certain reference for developing efficient, economic, and sustainable flow biocatalysis approaches.
Droplet-based microfluidic technology shows great application potential in the preparation of drug delivery systems due to its excellent handling of fluids at the micro- or nano-scale. Compared with the microspheres prepared by conventional preparation methods, the microspheres prepared by droplet-based microfluidics exhibit a well-defined and controllable composition and structure, high monodispersity, and good process reproducibility. Focusing on the droplet generation passive method and passive microchannel device, this review introduces the basic principles of microsphere preparation by droplet -based microfluidics, and systematically analyzes the main effects of fluid-related parameters, device design parameters and additives on the critical quality attributes, including microsphere morphology, particle size distribution, encapsulation efficiency, and drug release behavior. It is hoped that this review can provide a reference for the research and development of microspheres.