Home Latest Articles
Latest Articles
  • Changchun LIU, Xinxin ZHOU, Chun XUE
    Chinese Journal of Pharmaceuticals. 2025, 56(8): 1011-1016.

    Herein, a new three-step synthetic route for the key intermediate of the tyrosine kinase 2(TYK2)inhibitor deucravacitinib, 2-methoxy-3-(1-methyl-1H-1,2,4-triazol-3-yl)aniline(1) was described. N'-Hydroxy-2-methoxy-3-nitrobenzimidamide(3) was prepared via one-pot etherification/addition reaction of 2-fluoro-3-nitrobenzonitrile(2) with methanol and hydroxylamine hydrochloride in the presence of potassium hydroxide and tetrabutylammonium bromide.The esterification of compound 3 with tosyl chloride gave N'-(tosyloxy)benzimidamide(4), without further separation and purification, which was directly subjected to the condensation cyclization with methanamine hydrochloride and triethoxymethane to afford 3-(2-methoxy-3-nitrophenyl)-1-methyl-1H-1,2,4-triazole(5). Compound 5 was reduced by thiourea dioxide in the presence of sodium hydroxide to obtain the target product 1 with overall yield of 76%(based on 2)and purity of 99.3%. This new synthetic route has fewer reaction steps, higher overall yield, good selectivity, safe operation,which avoids the use of toxic hydrazine (or its derivatives) to construct 1,2,4-triazoles.

  • Yu DUAN, Yuanzhen DONG, Chengcheng WANG, Jianguang LU, Shuaiyi HUANG, Jun FENG
    Chinese Journal of Pharmaceuticals. 2025, 56(8): 1017-1026.

    Cagrilintide(1) is a long-acting lipidated analogue of amylin, and its compound preparation with semaglutide, known as CagriSema, has demonstrated a weight reduction effect of up to 22.7% in the latest phase Ⅲ clinical trials. However, the long amino acid sequence of 1 poses challenges for its synthesis and purification. In this paper, using Rink Amide AM resin as the carrier, Fmoc-protected amino acids as raw materials, ethyl cyanoglyoxylate-2-oxime/N,N'-diisopropylcarbodiimide as condensation reagents, and trifluoroacetic acid system as the lysis solution, the reduced crude peptide was synthesized by a solid phase peptide synthesis(SPPS) method from the C-terminus to the N-terminus of C20 diacid according to the amino acid sequence of 1. The intramolecular disulfide bonds were subsequently formed through iodine oxidation. The crude peptide was purified by RP-HPLC, affording a purified product with a purity of 98% and a total yield of 26%. Additionally, this study explored and optimized the preparation process parameters, providing valuable insights for industrial production of 1.

  • Zongwu ZANG, Xin BAI, Huixin CUI, Jing BIAN, Zhiru XU
    Chinese Journal of Pharmaceuticals. 2025, 56(8): 1027-1035.

    A LC-MS/MS method was established to detect the content of melphalan(1) in dog plasma and rat tissue, with lower quantification limits of 1 ng/mL and 1 ng/g, respectively. Using parallel experiments, the pharmacokinetics and tissue distribution characteristics of the test formulation of 1 with a commercially available reference formulation in dogs and rats were compared. After a single intravenous injection of 1 hydrochloride injection in dogs,the main pharmacokinetic parameters of the test and reference formulations were as follows: cmax (1 671.19±295.19) and(1 654.22±159.20)ng/mL, respectivelys; AUC0→t was (56 602±6 864) and (55 289±8 174) min·ng–1·mL–1, respectively,and t1/2 was (45±3)min for both. Rats were also given 1 hydrochloride for injection, and the results showed that 1 was more distributed in the pancreas, kidney, liver, heart, and lung, but less distributed in tissues such as muscle, bone marrow, fat,and brain. The drug concentration in the bone marrow was lower than that in the blood at all sampling points. An unpaired t-test showed no significant difference in concentration between the test and reference formulations in various tissues,indicating that the two formulations had consistent pharmacokinetic behavior in dogs and consistent tissue distribution in rats, providing a reference for subsequent clinical applications.

  • Jiajia GONG, Chunyue HUANG, Xiao HU, Jina DENG, Jie HUANG
    Chinese Journal of Pharmaceuticals. 2025, 56(8): 1036-1043.

    An UPLC method was established to determine the fingerprints of 21 batches of Guanjie Kebi Wan, and the similarity evaluation software(2012 version) for traditional Chinese medicine chromatographic fingerprint was used for similarity evaluation. Meanwhile, the UPLC-QTRAP-MS/MS method was established to determine 6 types of aconitum alkaloids(benzoylmesaconine, benzoylaconine, benzoylhypaconine, mesaconitine, aconitine, and hypaconitine). The results showed that the fingerprint similarity of 21 batches of Guanjie Kebi Wan was greater than 0.952, and 17 common peaks were identified. Additionally, 8 components were confirmed according to the standard comparison. It was linear for the 6 aconitum alkaloids in the corresponding mass concentration ranges, with an average recovery rate of 84.3% to 105.5%(RSD≤1.37%). The established method is simple, sensitive, reliable, and has good reproducibility, which can be applied to the quality control of Guanjie Kebi Wan.

  • Qinke XU, Wenjun XU, Ying SUN, Xuebing WEI, Jijun XU, Xiao MA, Zhaohui GUO
    Chinese Journal of Pharmaceuticals. 2025, 56(8): 1044-1050.

    A microwave digestion-inductively coupled plasma mass spectrometry(ICP-MS) method was established to determine the contents of 37 inorganic elements(Ag, As, Ba, Be, Bi, Cd, Ce, Co, Cr, Cs, Cu, Dy, Er, Eu,Gd, Ho, Hg, In, La, Li, Lu, Mn, Nd, Ni, Pb, Pr, Rb, Sc, Sm, Sr, Tb, Th, Tl, Tm, V, Y, and Yb) in Cynomorium songaricum Rupr samples from different origins. Hierarchical clustering analysis, principal component analysis, and orthogonal partial least squares discriminant analysis were used to perform cluster analysis, correlation analysis, and difference analysis on the samples, aiming to explore the relationship between Cynomorium songaricum Rupr from different origins and their inorganic elements. The results showed differences in the contents of inorganic elements among samples from different origins. Combined with hierarchical clustering analysis, principal component analysis, and orthogonal partial least squares discriminant analysis, the samples were classified into two categories, and nine differential inorganic elements(In, Th, Y, Cd,Gd, Dy, Yb, Pr, and Sm) were identified. The established method can effectively distinguish the distribution characteristics of Cynomorium songaricum Rupr samples from different production areas, providing data support for optimizing the cultivation of Cynomorium songaricum Rupr and ensuring the quality and safety of medicinal materials.

  • Jiayu CAO, Xijing WANG, Yuan WANG, Wenjun ZHANG, Jiye ZHANG
    Chinese Journal of Pharmaceuticals. 2025, 56(8): 1051-1056.

    An HPLC method was established for the determination of the related substances in aprepitant(1)capsules. A ZORBAX SB-Aq C18 column(4.6 mm×250 mm, 5 μm) was used, and the analysis was carried out in the gradient elution mode with tetrabutylammonium hydrogen sulfate buffer solution-acetonitrile as mobile phase. The flow rate was 1.0 mL/min, the column temperature was 30 ℃, the detection wavelength was 210 nm, and the injection volume was 20 μL. The results showed that the main component and each impurity peak could be well separated under this chromatographic condition. The quantification limits of 1, impurities A, C, E, and F were 0.36, 0.52, 0.48, 0.46, and 0.39 ng,respectively. And it was linear for 1, impurities A, C, E, and F in the corresponding concentration ranges(r≥0.999 6). The determination results of 6 batches of 1 capsules showed that the known impurities and an unknown maximum individual impurity were all less than 0.07%, and the total impurity content was less than 0.07%. The established method has strong specificity and high accuracy, which can be used for the determination of the related substances in 1 capsules.

  • Naibin ZHANG, Zhen SHEN, Wenhong HU, Danyang FENG, Bo DING
    Chinese Journal of Pharmaceuticals. 2025, 56(8): 1057-1061.

    During the production process of sodium bicarbonate Ringer’s injection, carbon dioxide gas is used to adjust the pH of the injection, thus requiring control of the microbial limit of the gas. This study employed two sampling methods and three cultivation conditions to conduct microbial limit testing on three batches of compressed carbon dioxide gas. Using a pinhole compressed air microbial sampler, the filtered compressed carbon dioxide gas was sampled at a flow rate at 100 L/min with a total sampling volume of 1 000 L. Pancreatic casein soy peptone agar was used as the culture medium, which was incubated at 30 - 35 ℃ for 5 days. The test results showed that a concentration of less than 1 cfu/m3,meeting the requirements for planktonic bacteria in class A clean environments. No microorganisms were detected under other sampling methods or cultivation conditions, indicating that the risk of microbial contamination from compressed carbon dioxide gas was low, and the filters used in production could effectively remove microorganisms from the gas.

  • Yang LI, DeJin GAO, Bo TAO, Langui XIE, Hang XU
    Chinese Journal of Pharmaceuticals. 2025, 56(8): 1063-1069.

    The production environment for sterile pharmaceuticals plays a crucial role in fields such as drug manufacturing, directly impacting product quality and safety. In accordance with the latest domestic and international regulations and guidelines, this article introduces the environmental monitoring performance qualification(EMPQ) process for sterile pharmaceutical production environments. It focuses on cleanroom EMPQ procedures and risk assessment methods, and demonstrates the overall transition from EMPQ to environmental monitoring(EM) through specific examples.The aim is to provide a scientific basis for continuous optimization of sterile production environment monitoring in enterprises, ensuring more stable and safer product quality.

  • Jiahui SONG, Zhihong BAO, Yanjun ZHAO, Langui XIE, Xia ZHAO
    Chinese Journal of Pharmaceuticals. 2025, 56(8): 1070-1076.

    As a core device for detecting the concentration of suspended particles in clean environments, airborne particle counters play a vital role in ensuring product quality control through its measurement accuracy and operational reliability. This article systematically reviews the technological evolution of airborne particle counters and the challenges in their calibration and traceability. In terms of technological advancements, the instrument has transitioned from a white light source to a laser light source, with the detection limit improved from the micrometer level to the nanometer level.Additionally, the optimization of optical systems, upgraded signal-processing algorithms, and miniaturization designs have significantly enhanced sensitivity and detection efficiency. Innovative technologies such as dynamic monitoring and multi-parameter integration have further expanded its functional applications. Regarding calibration and traceability, technological iterations have raised demands for higher precision, yet challenges persist, including the incompatibility of static single-parameter calibration with dynamic multi-dimensional monitoring, insufficient stability of standard particle aerosols,and low calibration accuracy in large particle size channels. Future efforts should focus on overcoming both technical performance and calibration accuracy challenges to meet increasingly stringent requirements for clean environment testing.

  • Ying YAO, Ze XUAN, Xia WANG, Guanghua ZHANG, Zhijie JIANG
    Chinese Journal of Pharmaceuticals. 2025, 56(8): 1077-1085.

    Microbial contamination control in pharmaceutical production environments is crucial for ensuring drug quality. This study utilized 16S rRNA sequencing to comprehensively analyze the distribution characteristics of 98 microbial isolates collected from air conditioning systems(42 isolates), equipment surfaces(11 isolates), personnel workwear(25 isolates), and water systems(20 isolates). Results showed that microbial community structures varied significantly across sources. Air conditioning systems were dominated by Actinomycetes, Bacilli, and Gammaproteobacteria; Bacilli and Actinomycetes predominated in personnel workwear and equipment samples; water systems exhibited a distinct prevalence of α-, β-, and γ-Proteobacteria with no cross-distribution to other environments. Cross-environmental analysis revealed shared strains among air conditioning systems, equipment, and personnel, suggesting airflows, human contact, and equipment surfaces as potential transmission routes. It is recommended that pharmaceutical enterprises should establish environmental strain banks, integrating dynamic monitoring results and phylogenetic analyses to achieve precise microbial risk management.

News