Home Archive
Archive
2024 Volume 55 Issue 9  Published: 2024-09-10
    Perspectives
  • Chao LIU , Xiaohui TANG , Shasha LI , Jianjun CHEN
    doi: 10.16522/j.cnki.cjph.2024.09.001

    As an endogenous messenger molecule, nitric oxide has multiple effects in tumor treatment. It can not only induce tumor cell apoptosis but also achieve outstanding synergy with other treatment methods. To improve its therapeutic efficiency, researchers have designed and prepared various types of nitric oxide nanodelivery systems and applied to tumor therapy research. Among them, the controllable responsive nitric oxide nanodelivery systems have received extensive attention for their excellent on-demand release ability and brilliant therapeutic effect. This article mainly reviews the controllable responsive nitric oxide nanodelivery systems based on different nanomaterials and discusses their applications in tumor therapy from endogenous-based and exogenous-based stimuli-responsiveness respectively, in order to provide a reference for the further development of nitric oxide nanodelivery systems.

  • Review
  • Tiantian ZHANG , Wenli LI , Xinglong TAO , Zhiqing ZHANG
    doi: 10.16522/j.cnki.cjph.2024.09.002

    Hollow fibers are a type of chemical fiber material with a linear tube like cavity. The membrane wall is densely packed with micropores, which can intercept macromolecular substances and serve as a carrier for cell growth. They are widely used in the field of pharmaceutical science, including screening of active ingredients in natural drugs, sample pretreatment, microextraction, construction of pharmacokinetic and pharmacodynamic models. This paper elaborates the current application status of hollow fibers, which provides a reference for further exploration of the application in the pharmaceutical field.

  • Review
  • Qiulin YAN , Hengqian WU , Yan GAO , Zhengping WANG , Jun HAN
    doi: 10.16522/j.cnki.cjph.2024.09.003

    Periodontitis is a chronic infection of the periodontal tissue caused by the biofilm of dental plaque, which can lead to tooth loosening, gum atrophy. Its main pathogenic bacteria include Porphyromonas gingivalis. Based on the abundant blood vessels in the periodontal pocket, local delivery of antibacterial drugs can make drugs act directly on the lesion site and improve the bioavailability. This paper focuses on introducing biodegradable local drug delivery systems that have been marketed for the treatment of periodontitis, and summarizes the relevant drug prescriptions and preparation processes, hoping to provide a reference for the development of new dosage forms for the treatment of periodontitis.

  • Review
  • Rui CHEN , Xiaohong XU
    doi: 10.16522/j.cnki.cjph.2024.09.004

    Nano spray drying is a mild and effective particle preparation technology. It innovatively adopts piezoelectric atomizing mechanism, laminar heating mode and electrostatic particle collection system, and has many advantages such as adjusting particle size, improving solubility, realizing surface modification. Nanoscale particles can be obtained with high output(90%) by this technology. The minimum sample volume processed by the nano spray dryer can reach milligram level. Starting from the development history and technical characteristics of nano spray drying technology, this paper introduces the structure and working mechanism of nano spray dryer, summarizes the formulation and process parameters affecting the properties of the obtained particles by nano spraying, and puts forward suggestions on their selection and optimization.

  • Paper
  • Yuewen HAN , Peng PENG , Jiajia LIU , Xiangyu CHEN , Fuli ZHANG , Chuanmeng ZHAO
    doi: 10.16522/j.cnki.cjph.2024.09.005

    The sources of eight related substances in the crude product of cisatracurium besylate(1) were analyzed, and the related substances A, B, C, D, F, H, O included in EP and the non-pharmacopoeial impurity(6), named(1R,2R)-1-(3,4-dimethoxybenzyl)-2-(3-ethoxy-3-oxo-propyl)-6,7-dimethoxy-2-methyl-1,2,3,4-tetrahydroisoquinolinium benzenesulfonate were synthesized by the acid hydrolysis and esterification with (1R,2R)-1-[(3,4-dimethoxyphenyl)methyl]-2-[3-(tert-butoxy)-3-oxy-propyl]-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methylisoquinolinium benzenesulfonate(4) as the starting material. The structures of these compounds were confirmed by 1H NMR, 13C NMR and HRMS analyses. Additionally, a crystallization process with obvious impurity removal effect and high yield was developed, which was suitable for industrial production.

  • Paper
  • Zenghui YU , Hui WANG , Siyu HUANG , Xiangping YANG , Xiangyang XU
    doi: 10.16522/j.cnki.cjph.2024.09.006

    This study prepared three impurities of alprazolam(1) namely impurities D, H, and J, which were recorded in the EP10.0, but their synthetic routes had not been reported in the literature. Additionally, during the stability study of 1 bulk drug, a new impurity Q was discovered. Its chemical structure was determined as [5-chloro-2-[3-[[[(7-chloro-5-hydroxy-5-phenyl-4,5-dihydro-[1,2,4]triazolo[4,3-a]quinolin-1-yl)methyl]amino]methyl]-5-methyl-4H-1,2,4-triazol-4-yl]phenyl](phenyl)methanone through high-resolution mass spectrometry and nuclear magnetic resonance spectroscopy. The successful preparation of these four impurities is of great significance for the quality research of 1 bulk drug and its formulations.

  • Paper
  • Hu XIAO , Jianwei DOU , Mengyao LIU , Shuai LI , Daizhou ZHANG
    doi: 10.16522/j.cnki.cjph.2024.09.007

    In order to effectively control the quality of pranoprofen(1), four related substances were synthesized, namely 2-(5H-chromeno[2,3-b]pyridin-7-yl)acrylic acid(related substance A), 2-(5-oxo-5H-chromeno[2,3-b]-pyridin-7-yl)propanoic acid(related substance B), 2-hydroxyl-2-(5H-chromeno[2,3-b]pyridin-7-yl)propanoic acid(related substance C), 2-(5-hydroxy-5H-chromeno[2,3-b]pyridin-7-yl)propanoic acid(related substance D), and their structures were confirmed by 1H NMR, 13C NMR and MS. The synthetic routes of these four related substances were short with mild reaction conditions, and their purities were more than 98.5%, providing some references for the the quality control of 1. Among them, the synthesis routes of related substances A and C were reported at the first time.

  • Paper
  • Wenwen HAN , Yaowei LI , Xinxin ZHANG
    doi: 10.16522/j.cnki.cjph.2024.09.008

    Several nanoemulsions with different contents of ω-3 polyunsaturated fatty acid glyceride were prepared by the high-speed shearing and high-pressure homogenization method and their effects on the treatment of liver injury were investigated. The combination of optimized process parameters selected through the experiment of single factor was as follows: the oil phase and the water phase were sheared at a shearing speed of 8 000 r/min for 5 min at 60℃, and then homogenized at a pressure of 60 000 kPa for 6 cycles. The nanoemulsion prepared with the optimized process parameters presented a white emulsion appearance, with an average particle size of approximately 200 nm and a pH value of approximately 7.4, and all indicators met the quality requirements. The results of the cell uptake test showed that the prepared nanoemulsions could be effectively taken up by human fetal hepatocyte cell line(LO2 cell), and the uptake amount was positively correlated with the ω-3 polyunsaturated fatty acid content. As for the cholestatic liver injury model mouse, tail vein injection of nanoemulsions could effectively improve liver injury, and the nanoemulsions with a high ω-3 polyunsaturated fatty acid glyceride content showed a better therapeutic effect on liver-injured mice. In conclusion, the ω-3 polyunsaturated fatty acid glyceride nanoemulsions prepared in this study had a significant improvement effect on liver injury and good clinical application potential, providing an effective reference for the optimal design of injectable glyceride nanoemulsion drugs.

  • Paper
  • Wenting SHI , Zan YANG , Qianyi FENG , Weimei CHEN , Jiangping CHEN
    doi: 10.16522/j.cnki.cjph.2024.09.009

    This study constructed and optimized the design space of the spray drying process for Xiaochengqi granules based on the concept of quality by design(QbD). The powder yield, moisture content, contents of naringin, neohesperidin, honokiol, magnolol, emodin and chrysophanol were taken as critical quality attributes(CQAs). The comprehensive weight coefficient of each CQA was determined by the analytic hierarchy process combined with entropy method, then the comprehensive scores of evaluation were calculated. According to the results of Plackett-Burman design, the relative density of the liquid medicine and the feeding speed were identified as the critical process parameters(CPPs) for the spray drying process of Xiaochengqi granules. Then, the central composite design was used to optimize the ranges of the selected CPPs. The design space was obtained through model fitting, and based on a 95% confidence interval, the relative density of the liquid medicine was determined to be 1.03 - 1.06, and the feeding speed was 6 - 12 mL/min. The verification results showed that the process parameters within the design space could ensure the stability of the spray drying process and product quality of Xiaochengqi granules.

  • Paper
  • Hong QIAN , Jing BIAN , Yangsheng CHEN , Changyu DU , Huaizheng ZHANG , Zhiru XU
    doi: 10.16522/j.cnki.cjph.2024.09.010

    A highly sensitive LC-MS/MS method was established for detecting calcitriol content in human plasma, with a lower limit of quantification of 20 pg/mL, which could meet the clinical detection needs. A randomized, open, three cycles, triple crossover design was used to investigate and compare the pharmacokinetic characteristics and bioequivalence between the tested preparation and the commercially available reference preparation of calcitriol in 36 healthy Chinese volunteers who were given a single oral administration of calcitriol soft capsules(at a dose of 4.0 μg) on an empty stomach. The results showed that the main pharmacokinetic parameters of the tested preparation and the reference preparation were as follows: tmax were (3.46±1.33) and (2.92±1.47)h, t1/2 were (8.14±3.22) and (7.70±2.32)h, cmax were (160.68±52.41)and (169.00±50.26)pg/mL, respectively. The variance in plasma concentrations of the tested and the reference preparations showed the same trend. The geometric mean ratios of the main pharmacokinetic parameters were within the 90% confidence interval of 80.00%- 125.00%, indicating that the test and reference formulations were bioequivalent.

  • Paper
  • Song WANG , Mingyan YU , Dandan ZHANG , Wenkun LIU , Dejun CHEN
    doi: 10.16522/j.cnki.cjph.2024.09.011

    To preliminarily predict the bioequivalence of glipizide tablets, the in vitro dissolution and permeation rates were studied with the parallel artificial membrane permeability assay(PAMPA). The Macro Flux system for drug bioequivalence prediction was used to investigate the dissolution and permeability processes of three test preparations and the reference preparation in the fasting and fed states. To predict whether the test preparations were bioequivalent to the reference preparation, two key quality parameters, namely the permeation rate and the total permeation amount, were compared. The 90% confidence interval of the geometric mean ratio of the quality parameters that passed the consistency evaluation was in the range of 80.00% - 125.00%. For the others that did not fall into this interval, one batch of the test preparation had a similar dissolution curve to the reference preparation. The PAMPA may provide support for the prescription screening and bioequivalence risk assessment of preparations.

  • Paper
  • Xiaowen ZHANG , Ganglong JIANG , Dongshuo MENG , Ainan ZHOU , Yu LIU
    doi: 10.16522/j.cnki.cjph.2024.09.012

    A LC-MS method was established to determine the 4-dimethylaminopyridine(2) and 4-dimethyl-aminopyridine N-oxide(3) in tofogliflozin(1). The ACQUITY UPLC BEH C18 column (4.6 mm×150 mm, 5 μm) was used, with the electrospray ionization and multiple response monitoring mode. The analysis was carried out in the gradient elution mode with methanol as mobile phase A, and 0.1% formic acid aqueous solution as mobile phase B. The results showed that it was linear for 2 and 3 in the ranges of 15.40 - 616.00 ng/mL and 15.58 - 623.20 ng/mL, respectively. The limits of detection for 2 and 3 were 3.08 and 3.12 ng/mL, respectively. The average recoveries were 104.33% and 101.54%, with RSDs of 3.32% and 3.10%, respectively. The established method is sensitive, selective and accurate, which can be used for the determination of 2 and 3 in 1.

  • Paper
  • Xiaodong YANG , Junhui WEI , Yuchen HUO , Yan CUI , Chen LIU , Nan XIE
    doi: 10.16522/j.cnki.cjph.2024.09.013

    The compatibility of human immunoglobulin(pH 4)(1) for intravenous injection with its internal packaging materials(medium borosilicate glass molded injection bottle and halogenated butyl rubber plug for injection) was investigated. Five extraction solvents were used for the extraction test of the internal packaging materials and the toxicological risk assessment of the extracts was carried out. By simulating accelerated testing, trend analysis was conducted on Si, B, and Al elements in the samples. Scanning electron microscopy was used to observe the inner surface of the glass bottle in order to predict the detachment of the injection bottle. Meanwhile, the routine inspection items for long-term stability testing of 1 were determined. The results showed that the detection results of extracted elements from the inner packaging materials were all below the control thresholds, and the organic safety thresholds were all greater than 1.0. The results indicated that under the current exposure level, the extractable substances do not pose a safety risk to users. The simulation acceleration test results predicted that the drug will not have the risk of detachment after being stored under long-term stability conditions for 36 months. The long-term stability test results showed that all routine inspection items of the drug met the requirements of the pharmacopoeia. The internal packaging material has no significant impact on the quality of the drug and has good compatibility, which can be used for the internal packaging system of 1.

  • Paper
  • Jinpeng WANG , Guoxiang SUN
    doi: 10.16522/j.cnki.cjph.2024.09.014

    A HPLC-MS/MS method was established for the determination of the migration amount of trioctyl phthalate(TOTM) in PVC infusion sets, and the HPLC method was adopted to investigate the compatibility of PVC infusion sets with five types of injections, namely nitroglycerin, amiodarone hydrochloride, phentolamine mesylate, metronidazole, and inosine. The results showed that under the conditions used in clinic, the total migration amount of TOTM from three batches of PVC infusion sets was far below the permitted daily exposure(PDE) for adults. And the PVC infusion sets exhibited significant adsorption effects on nitroglycerin and amiodarone hydrochloride, whereas their adsorption effects on phentolamine mesilate, metronidazole and inosine were not observed. This method has high sensitivity, simple operation, and good accuracy, which is suitable for studying the compatibility of PVC infusion sets and drugs.

  • Paper
  • Yang LI , Hui YAO , Jinli DOU , Hang XU
    doi: 10.16522/j.cnki.cjph.2024.09.015

    In order to comprehensively investigate the factors affecting the sterilization effect of the tunnel oven and strengthen the risk identification, this paper studied from the aspects of the microorganisms, temperature distribution, air flow, moisture residue, pressure gradient change, etc. The results showed that the microorganisms could still be detected in the cooling section of the tunnel oven by manual wiping. The high temperature environment in the sterilization section for a long time would increase the number of suspended particles, increase the stress in the bottle, and increase the risk of broken bottle and pollution. The change of air flow between washing bottles would bring fluctuations to the pressure difference balance of the equipment. The increases of residual moisture in the bottle and the height of the baffle above the bottle would decrease the value of the bactericidal thermal strength (FH). Placing multiple rows of probes for temperature verification could more fully identify sterilization cold points. In order to eliminate the risks and hidden dangers to the maximum extent to ensure drug safety, in actual production, it was recommended to increase the sterilization function in the cooling section of the tunnel oven, avoid the long-term stagnation of the bottle in the sterilization section, maintain the relatively stable air flow between the bottle washing room, check the smooth blowhole of the bottle washing machine and ensure its exhaust capacity, select the appropriate baffle height according to the height of the bottle in production, and arrange multiple rows of probes for temperature verification.

  • Paper
  • Aixia WANG , Xiaoman ZHANG , Kai ZHAO , Hui QIAN , Songhui CHEN
    doi: 10.16522/j.cnki.cjph.2024.09.016

    A method for determining the particle size distribution of lurasidone hydrochloride(1) bulk drug was established and validated. A laser particle size analyzer was used with organic injection mode. By examining the parameters such as dispersant and dosage, refractive index and absorption rate of the sample material, ultrasound time, and stirring cycle speed, the accuracy, precision, stability, and durability of the method were verified. The results showed that the parameters of the established method for determination of particle size distrubition of 1 were as follows: the refractive index of the sample material was 1.65, the absorption index was 0.01, the refractive index of the dispersant was 1.42, the light shielding degree was 12% - 20%, and the stirring cycle speed was 2 500 r/min, the sample measurement time and background time were both 10 s, and the sample was measured for 6 times. This method has high precision, good stability and durability. The RSDs of d(0.5), d(0.1), and d(0.9) of 1 were all less than 3%, which met the specified requirements and could be used for particle size determination of 1 bulk drug.

  • Pharmaceutical Management & Information
  • Duanduan CONG , Ying GENG , Qiang LI , Yanze SUN , Ningning MIN , Zhimin YANG
    doi: 10.16522/j.cnki.cjph.2024.09.017

    As the population ages, the need for medications tailored to older adults becomes increasingly critical. Due to pathophysiological changes, comorbidities, and polypharmacy, older adults may respond differently to drugs than younger individuals. This necessitates targeted drug development and adjusted dosages. However, older adults, particularly those over 80 years of age, are often underrepresented in clinical trials. This lack of research data hinders the safe and effective use of medications in this age group. New drug development and clinical research hold immense potential for improving the well-being of older adults. To achieve this, strong collaboration between governments, pharmaceutical companies, and research institutions is essential. In-depth studies on how medications interact with the aging body are crucial. Furthermore, establishing a robust scientific evaluation system, informed by both policy and scientific advancements, is paramount to ensure the safety and efficacy of medications for older adults. This article explores key considerations for new drug development and clinical research specific to this growing demographic, taking into account both domestic and international regulatory developments.

  • Pharmaceutical Management & Information
  • Junwei MA , Lianjie REN
    doi: 10.16522/j.cnki.cjph.2024.09.018
  • Pharmaceutical Management & Information
  • Runfang GUO , Guiyu LIAN
    doi: 10.16522/j.cnki.cjph.2024.09.019
  • Pharmaceutical Management & Information
  • Xiaojuan HUANG , Shan LI , Shoujun JIANG , Shihua LU , Xiangyu WANG
    doi: 10.16522/j.cnki.cjph.2024.09.020
News