Home Archive
Archive
2024 Volume 55 Issue 11  Published: 2024-11-10
    Perspectives
  • Jianyi LI , Hancheng WANG , Han ZHANG , Xingyu WU , Qiushi CHEN , Qingwei ZHANG
    doi: 10.16522/j.cnki.cjph.2024.11.001

    Deuterium substitution is a method that involves replacing specific hydrogen(H) atoms in drug molecules with deuterium(D) atoms, thereby improving the absorption, distribution, metabolism, and affecting of the drug molecules within the body. It can reduce the dosage or frequency of administration, enhance safety, and achieve better therapeutic outcomes. Nowadays, deuterium substitution has become an important strategy in rational drug design and optimization of druggability. The methods of deuterated modification primarily include chemical synthesis and enzymatic catalysis. Chemical synthesis encompasses techniques such as the introduction of deuterated intermediates, halogen or unsaturated bond reduction, acid/base catalysis, and metal-catalyzed hydrogen-deuterium exchange. Enzymatic catalysis involves methods such as enzyme-catalyzed hydrogen-deuterium exchange, reductive deuteration, and decarboxylative deuteration. This review outlines the latest research progress of drug molecule deuteration in recent years with the aim of providing references for the research and development of deuterated drugs.

  • Review
  • Hengyuan MA , Zhiqiang KE , Zhengding SU
    doi: 10.16522/j.cnki.cjph.2024.11.002

    Traditional small molecule kinase inhibitor drugs face numerous challenges, such as the propensity for drug resistance and the problem that some targets are undruggable. The proteolysis targeting chimera(PROTAC) technology utilizes the inherent ubiquitin-proteasome system in cells to achieve the degradation of proteins of interest(POI) for treating diseases, which can avoid the limitations of undruggable targets and drug resistance. Therefore, the PROTAC technology is expected to overcome the limitations of small molecule inhibitors. At present, some PROTACs have entered the clinical trial stage and are expected to become potential treatment methods for many diseases. This review introduces the biological mechanism, technical advantages, molecular design and clinical application prospects of PROTAC, hoping to provide a reference for its drug development and clinical application.

  • Review
  • Jifang LIU , Xuhua LIANG , Lingyan KONG , Min CHENG , Aigen FU
    doi: 10.16522/j.cnki.cjph.2024.11.003

    Covalent organic frameworks(COFs) have attracted great attention in the field of drug delivery due to their characteristics such as high specific surface area, uniform and adjustable pore size, and facile modification and functionalization. This review introduces the preparation methods of COFs, including template-mediated coprecipitation method, one-pot synthesis method and in situ doping method. More over, this review elaborates the structural design of COFs, including intelligent stimuli-responsive molecular design and surface modification. In addition, this review also outlines the applications of COFs in the field of delivery of antineoplastic, antibacterial and anti-inflammatory drugs, aiming to provide insightful perspectives to facilitate the rapid development of COFs-based drug delivery systems.

  • Review
  • Qingya TIAN , Ziqiang WANG , Hong SHAO
    doi: 10.16522/j.cnki.cjph.2024.11.004

    The continuous proliferation of viral products, such as viral vector vaccines, CAR-T products produced by lentiviral transduction, and adenovirus-based gene therapy products, has presented novel challenges for manufacturing units and regulatory agencies in terms of quality control and supervision due to the complexity of production methods and diversity of products. To ensure the purity, activity, and other quality attributes of viral products, it is imperative to conduct inspections during the production and release processes. The infectious titer, as one of the key quality attributes, holds significant importance as it allows for the evaluation of safety and efficacy. This review provides a comprehensive summary of the principles and applications of existing methods for quantifying virus infectivity, including plaque assay, 50% tissue culture infectious dose, fluorescent focus assay, various polymerase chain reactions, flow cytometry, and nano-flow cytometry(nFCM). By introducing and comparing these methods, manufacturing companies and regulatory agencies can make informed decisions regarding the selection of appropriate techniques to ensure product quality in different application scenarios.

  • Review
  • Yutong ZHOU , Yulan YANG , Xiaofei WANG
    doi: 10.16522/j.cnki.cjph.2024.11.005

    The active pharmaceutical ingredient in dry powder inhalers(DPIs) is usually an insulator with a small particle size that tends to exhibit significant electrostatic behavior in the preparation and usage stages of DPIs. It will cause a decrease in the flowability and an increase in adhesion of drug particles, which in turn will affect the content uniformity and the aerodynamic particle size distribution(APSD) after atomization, leading to a decrease in lung deposition and efficacy of drugs. This review introduces the generation of static electricity in DPIs, the influences of static electricity on the blending uniformity and APSD of DPIs and the commonly used methods for evaluating electrostatic potential to provide a reference for subsequent electrostatic research on DPIs.

  • Paper
  • Haijun JIA , Sasa ZHANG , Zhongli HAN , Guimin ZHANG , Jianghua SHI
    doi: 10.16522/j.cnki.cjph.2024.11.006

    The synthesis of the antiplatelet aggregation inhibitor tirofiban hydrochloride(1) has been optimized. Ethyl n-butylsulfonyl-L-tyrosinate(5) was synthesized from ethyl L-tyrosinate(4) by sulfonylation. After the substitution of 5 with 4-(pyridin-4-yl)butyl-4-methyl benzenesulfonate(3), followed by the hydrolysis with lithium hydroxide, N-n-butylsulfonyl-O-[4-(4-pyridyl)butyl]-L-tyrosine(6) was obtained. Then, 6 was reduced by hydrogen in the presence of Pd/C and salted with hydrochloric acid to obtain the target compound 1. The overall yield was 63.5%(based on 4) with purity of 99.80%, and ee value of 99.8%. The improved process has short steps with high product yield, economical and easily accessible raw materials, and mild and controllable reaction conditions, which is suitable for industrial production.

  • Paper
  • Zihao ZHANG , Jing ZHANG , Jianguo YANG , Guobo HUANG
    doi: 10.16522/j.cnki.cjph.2024.11.007

    In order to control the quality of finerenone, this study synthesized five related substances, namely 4-(4-cyano-2-methoxyphenyl)-6-ethyl-2,8-dimethyl-5-oxy-1,4,5,6-tetrahydro-1,6-naphthyridin-3-carboxamide(related substance A), 4-(4-cyano-2-methoxyphenyl)-5-ethoxy-2,8-dimethyl-1,6-naphthyridine(related substance B), 3-hydroxy-4-(4-cyano-2-methoxyphenyl)-5-ethoxy-2,8-dimethyl-1,6-naphthyridine(related substance C), 4-(4-aminocarbonyl-2-methoxyphenyl)-5-ethoxy-2,8-dimethyl-1,4-dihydro-1,6-naphthyridin-3-carboxamide(related substance D), and 4-(4-cyano-2-methoxyphenyl)-5-ethoxy-2,8-dimethyl-1,6-naphthyridin-3-carboxamide(related substance E). The chemical structures of these substances were confirmed by 1H NMR, 13C NMR and HRMS.

  • Paper
  • Lili ZHAO , Yuqiang ZHU , Kai XU , Zhongsong ZHU , Guimin ZHANG , Zhong LIU
    doi: 10.16522/j.cnki.cjph.2024.11.008

    To determine the influence of different high inoculation densities on the expression level and quality of bispecific antibodies and strengthen the cell culture process, bispecific antibody cells were inoculated into a 3 L bioreactor at low, medium and high grades of high inoculation density[containing (10±1)×106, (15±1)×106 and (20±1)×106 cells per 1 mL, respectively] for fed-batch culture. The influences of different inoculation densities on antibody expression level and quality were evaluated. The results showed that compared with low grade of high inoculation density, the antibody expression levels of the intensified medium or high grade of high inoculation density process increased to 1.43 g/L, and there was no significant difference in antibody quality. Within the same culture period(16 d), on the premise of no influence on antibody quality and reduction of costs, medium grade of high inoculation density should be adopted for inoculation density, and the antibody expression level could be increased to 1.43 g/L, which was an 81% increase compared with the conventional process(0.79 g/L). Subsequently, the intensified medium grade of high inoculation density process was successfully scaled up to a 30 L bioreactor, providing valuable experience for subsequent antibody process development.

  • Paper
  • Xiaojuan ZHANG , Rushun SONG , Shuangshuang ZHANG , Shuangxi GU
    doi: 10.16522/j.cnki.cjph.2024.11.009

    Based on the quality by design concept, the key risk variables in the formulation of valsartan capsules were identified through risk assessment. Using the original drug “Diovan” as a reference and consistency in dissolution behavior as the evaluation index, a single factor method was employed to investigate the impacts of the variables such as the disintegrant amount, the preparation method of the adhesive, the addition method of the solubilizer, the capsule shells from different manufacturers, and the particle size of API on the dissolution rate. The self-made valsartan capsules prepared with the optimized formulation and “Diovan” exhibited consistent dissolution behaviors in four different dissolution media.

  • Paper
  • Shan LIN , Tong WU , Fei LI , Guozhi JIANG
    doi: 10.16522/j.cnki.cjph.2024.11.010

    The ultra-high performance liquid chromatography with quadrupole time-of-flight mass spectrometry(UPLC-QTOF-MS) and gas chromatography-mass spectrometry(GC-MS) methods were applied to systematically characterize the chemical constituents of turmeric extract. Based on Chinese Pharmacopoeia(2020 edition) VolumeⅠ, the quality control of curcuminoids in turmeric extracts was performed by UV and HPLC methods. The results showed that 44 components(including 28 curcuminoids, 10 sesquiterpenes and 6 others) and 9 volatiles were identified by UPLC-QTOF-MS and GC-MS, respectively. The results of quantitative analysis indicated curcumins were main components in extracts, which accounted for 65% among 10 batches. The significance of this study was to comprehensively reveal the chemical constituents of turmeric extract, which provided essential data for quality control and clinical application of the pharmaceutical dosage forms of turmeric extracts.

  • Paper
  • Cuiping LIU , Chengcheng ZHANG , Youzhi JIA , Hongjuan PAN
    doi: 10.16522/j.cnki.cjph.2024.11.011

    An HPLC method was established to determine eleven synthetic phosphatidylcholine(PC) and phosphatidylethanolamine(PE) phospholipids. Consideration of the structural characteristics and retention behaviors in chromatography of the phospholipids, C8 chromatography columns with pore sizes of 12 and 15 nm(120 and 150 Å) were connected in series for the first time. The serial sequence was Welch Topsil C8 column(4.6 mm×250 mm, 5 μm, 15 nm) at front and Ultimate XB C8 column(4.6 mm×250 mm, 5 μm, 12 nm) at back. The analysis was carried out in the gradient elution mode with water-methanol-acetic acid-triethylamine as mobile phase A, and methanol-isopropanol-acetic acid-triethylamine as mobile phase B. The results showed that the minimum separation degree of eleven synthetic PC and PE was 1.0. It was linear for seven synthetic PC phospholipids in the concentration of 0.1 - 1.0 mg/mL, and it was linear for four synthetic PC phospholipids in the concentration of 0.03 - 0.30 mg/mL. RSDs of precision were all less than 2.5%. And this separation method was successfully applied to the determination of synthesized phospholipids in two types of liposome injections and one excipient.

  • Paper
  • Bingbing KE , Menglan CHENG , Yuanyuan WANG , Kou NI , Yue WANG
    doi: 10.16522/j.cnki.cjph.2024.11.012

    Polymers, dimers and monomers were separated by gel filtration chromatography, and the C1q enzyme-linked immunosorbent assay(ELISA) method was established. The specificity, precision and sensitivity of the method were verified, and the substance of anticomplementary activity in different batches of products were determined and compared. The results showed that when the coating concentration of C1q on the ELISA plate was 2 μg/mL and the dilution ratio of the secondary antibody was 30 000, the test sample exhibited a typical S-shaped binding curve in the concentration range of 1 - 50 000 μg/mL, with a linear interval of 10 - 400 μg/mL. The specificity and sensitivity of the method were good, with a precision test RSD(n=6) of 6.7%. The binding between the polymer and the complement molecule C1q was significantly higher than that of the dimer and polymer. Polymers were the substance for inhibiting complement activity in this product, and the C1q ELISA method could be used to directly compare the substance levels of anticomplementary activity in different products.

  • Paper
  • Dongshuo MENG , Xiaowen ZHANG , Zixue ZHANG , Jiayu LIU , Yu LIU
    doi: 10.16522/j.cnki.cjph.2024.11.013

    A HPLC-UV method was established to determine 15 related substances in tedizolide phosphate(1) bulk drug. The Welch Ultimate XBridge C18 chromatography column was used, and the analysis was carried out in the gradient elution mode with 0.01 mol/L ammonium dihydrogen phosphate and 0.01 mol/L ammonium dihydrogen phosphate aqueous solution(pH 5.5) as mobile phase A, and acetonitrile as mobile phase B. The detection wavelength was 235 nm. And another HPLC-UV method was established to determine the isomer impurity in 1 bulk drugs. The Daicel Chiralpak OJ-H chromatographic column was used, and the analysis was carried out with an isocratic elution mobile phase composed of n-hexane, ethanol and diethylamine in a volume ratio of 35∶65∶0.1. The detection wavelength was 300 nm. The results showed that it was linear for the relevant substances in the concentration range of 0.2 - 7.0 μg/mL, and the method recovery rate was 90% - 108%. The established method has good sensitivity, strong selectivity, and high repeatability, which can provide a reference for quality control research in 1.

  • Paper
  • Yaping LI , Jiangtao YANG , Liya LIN , Fuli ZHANG , Yongfu HE
    doi: 10.16522/j.cnki.cjph.2024.11.014

    An HPLC method was established to determine the related substances in lifitegrast(1) bulk drugs. The Fortis Diphenyl column (4.6 mm×250 mm, 5 μm) was used, and the analysis was carried out in the gradient elution mode with the mixture of 10 mmol/L potassium dihydrogen phosphate solution and acetonitrile in a volume ratio of 95∶5 as mobile phase A, and acetonitrile as mobile phase B. The flow rate was 1.0 mL/min, the column temperature was 40 ℃, the detection wavelength was 205 nm, and the injection volume was 5 μL. The results showed that the separation degree between 1 and each related substance was greater than 1.5, and it was linear for 1 and the related substances in the corresponding concentration ranges. The average recoveries(n=9) of 1 and the related substances were 99.3% - 104.1%, and the RSDs were all less than 5.1%. The established method is easy to operate, accurate in results, which is suitable for the determination of relevant substances in 1 bulk drugs.

  • Paper
  • Xiangyu YE , Qianqian XING , Ting ZHOU , Qiuhua XIN , Yunguang WANG
    doi: 10.16522/j.cnki.cjph.2024.11.015

    Geobacillus stearothermophilus(ATCC 12980)is commonly used to detect the sterilization effect of vaporized hydrogen peroxide. The study mainly discussed the effects of carriers and spore purity on the resistance of biological indicators(BIs) under vaporized hydrogen peroxide sterilization. The results showed that spore purity was negatively correlated with BIs resistance, poor carrier smoothness could also increase the resistance of BIs. Therefore, when accepting the BIs which used to monitor the vaporized hydrogen peroxide sterilization, besides the viable spore count, users should pay more attention to the carrier and the purity of the spores.

  • Paper
  • Min YANG , Tao ZENG , Chengchao HUANG , Ye LI , Yilan ZHANG
    doi: 10.16522/j.cnki.cjph.2024.11.016

    The acute systemic toxicity test and cytotoxicity test are conventional detection methods for infusion pharmaceutical packaging materials. This study summarized the toxicity detection tests in our lab during the past seven years. There were 15 674 batches of acute systemic toxicity tests, using more than 78 000 mice, and no unqualified test samples have been found. And 2 627 batches of samples underwent the cytotoxicity tests, in which 104 batches were found to be unqualified. The results showed that the samples that failed the cytotoxicity test did not show acute systemic toxicity. Therefore, it is recommended that the cytotoxicity test can be considered as the preferred method for the toxicity test of pharmaceutical packaging materials, which can not only reduce the consumption of laboratory animals but also improve the detection efficiency.

  • Pharmaceutical Management & Information
  • Miao WANG , Xutao WANG , Yuying LI , Hong SU
    doi: 10.16522/j.cnki.cjph.2024.11.017
  • Pharmaceutical Management & Information
  • Jingpeng YANG , Ruoxi YAN , Songyue ZHAO
    doi: 10.16522/j.cnki.cjph.2024.11.018

    Chimeric antigen receptor T cell immune-therapy(CAR-T) products have shown very good clinical effects in a variety of blood tumors. In recent years, research on CAR-T products in China has also exhibited a booming development trend. As the varieties of CAR-T products and their indications continue to increase and market demand rises, the production capacity of some manufacturers needs to be further expanded. This paper analyzes the possible risks of various factors by combing through the impacts of factory layout, equipment, public system, personnel, and process control during the expansion of CAR-T product production capacity, providing a reference for the continuous improvement of the quality of such products and the supervision of regulatory agencies.

  • Pharmaceutical Management & Information
  • Congshan ZHANG , Ningying MAO , Jianzhou YAN
    doi: 10.16522/j.cnki.cjph.2024.11.019
News