Home Archive
Archive
2023 Volume 54 Issue 2  Published: 2023-02-10
    Perspectives
  • Ao WANG , Yawan WANG , Yushe YANG
    doi: 10.16522/j.cnki.cjph.2023.02.001

    Due to many factors, such as point mutations in the ligand-binding domain of the androgen receptor(AR) and expression of splice variants, the existing treatment methods for prostate cancer have been successively ineffective. Therefore, new strategies for prostate cancer treatment are urgently needed. In recent years, significant progress has been made in targeted protein degradation technology. For example, AR degraders, which are expected to solve the problem of drug resistance in clinical prostate cancer patients, can block the androgen receptor signaling pathway by promoting AR degradation. This review focuses on the proteolysis targeting chimeras(PROTAC) technology and small molecule degraders targeting AR, and summarizes the research progress in this field from the mechanism of action and representative compounds, respectively. Compared with the inherent druggability defects of PROTAC molecules, small molecule AR degraders have more advantages and are now becoming the leading research direction for the treatment of prostate cancer.

  • Review
  • Xunlei LYU , Kuaile LIN , Weicheng ZHOU
    doi: 10.16522/j.cnki.cjph.2023.02.002

    The classic resolution of racemates is one of the choices for production of chiral compounds in large scale. Due to the advantages of inexpensive and readily available of resolution agents, mature methods, simple operation, and ease of large-scale production, resolution still plays a role in the pharmaceutical industry. However, its main disadvantage is that half of the products are unwanted enantiomers, resulting in significant waste. Recycle process of resolution-racemization is a direct and effective way to remedy this disadvantage. In this paper, the applications of recycle process of resolution-racemization in synthesis of chiral drugs are reviewed based on the different mechanisms of racemization(carbanion/carbocation mechanism and mechanism of elimination-reduction).

  • Review
  • Xi CHEN , Nan JIANG
    doi: 10.16522/j.cnki.cjph.2023.02.003

    Protein-protein interactions(PPIs) and the protein complexes formed through the interactions are essential for the cells to perform various basic functions. Most important life activities, such as DNA replication and transcription, protein synthesis and transport, cellular signal transduction and regulation of substance metabolism, are maintained through dense PPI networks. Genetic mutations, epigenetic alterations, and changes in the cellular microenvironment can interfere with PPI patterns or directly induce protein binding to form new tumor-specific interactions, leading to the genesis, progression, invasion and metastasis of tumors. In recent years, significant progress has been made in developing antineoplastics targeting PPI, some of which are in clinical trials or have been approved for marketing. There is growing evidence that drugs targeting specific PPI may have higher specificity and efficacy than those that inhibit the activity of proto-oncogene proteins and offer therapeutic opportunities to cure specific cancers. This paper systematically reviews the research progress of antineoplastics targeting PPI, and describes the challenges and countermeasures for the research of antineoplastics targeting PPI to provide a reference for their development.

  • Review
  • Zhiyuan HOU , Xiaoxiao CHENG , Qiang WEN , Hailong ZHANG , Jinsong DING
    doi: 10.16522/j.cnki.cjph.2023.02.004

    The incidence of mental disorders is high and has been increased year by year, and antipsychotics are still the main effective methods for treatment of mental disorders at present. However, traditional routes of administration(oral, injection, etc.) cannot fully meet clinical needs due to the limitations of high frequency of medication, large fluctuation in blood drug concentrations, more adverse reactions, and poor patient compliance. Transdermal drug delivery system(TDDS) is a non-invasive drug delivery method that can continuously deliver drugs, maintain stable blood drug concentrations for a long time, and discontinue the drug administration at any time. TDDS can avoid the liver first-pass effect and gastrointestinal irritation, reduce dose-related side effects of oral administration, and with better medication compliance. This paper reviews the latest research results and clinical trials of TDDS in the treatment of mental disorders, and addresses key points to consider in clinical studies of this kind of products, hoping to provide a reference for the pharmaceutical and clinical research of antipsychotics.

  • Review
  • Hongwei CHANG , Long XU
    doi: 10.16522/j.cnki.cjph.2023.02.005

    Compared with traditional inactivated vaccines, mRNA vaccines have strong immunogenicity and can activate both humoral and cellular immunity. In addition, it has the advantages of a short development cycle, broad neutralization breadth, low cost, and a relatively simple manufacturing process that can be rapidly scaled to respond to sudden and rapidly mutating pandemic outbreaks. As a new vaccine technology, mRNA vaccines have many novel features and challenges. Taking the three coronavirus disease 2019(COVID-19) vaccines, BNT162b2 from Pfizer/BioNTech, mRNA-1273 from Moderna, and ARCoV developed by several Chinese institutions, as examples, this paper summarizes and analyzes the development and manufacturing strategy for mRNA vaccines in terms of antigen selection, nucleoside modification, and lipid nanoparticles(LNP) formulation preparation. The current challenges and future directions are discussed to contribute to a better understanding of mRNA vaccine technology.

  • Paper
  • Xin HE , Ji XU , Tiantian YAO , Binbin HU , Kaiwei LUO , Wei WANG
    doi: 10.16522/j.cnki.cjph.2023.02.006

    Terbutaline sulfate(1) is a selective β2 adrenoreceptor agonist for the treatment of bronchial asthma. In this paper, a novel synthetic process for 1 and its crystal form B was reported. 1-[3,5-Bis(phenylmethoxy)phenyl]-2-bromoethan-1-one(3) was obtained from 3,5-dibenzyloxyacetophenone(2) with copper(Ⅱ) bromide by bromination.1-[3,5-Bis(benzyloxy)phenyl]-2-bromoethanol(4) was synthesized directly by the reduction of 3 with potassium borohydride in methanol. The bromine atom in 4 was substituted with tert-butylamine to give 1-[3,5-bis(benzyloxy)-phenyl]-2-(tert-butylamino)ethanol(5). After purification, 5 was hydrogenated in the catalysis of Pd/C and then salification with sulfuric acid to obtain 1. The crystal form B of 1 was obtained by recrystallization in the mixture of acetone and water in a total yield of 42%. In this process, the materials are inexpensive and easily available. This process has been tested by pilot-scale experiment, which is suitable for industrial production.

  • Paper
  • Changjiang SONG , Yunlong WANG , Qiyu YAO , Haitian YU , Guimin ZHANG
    doi: 10.16522/j.cnki.cjph.2023.02.007

    Using dimethyl 4-isobutoxyisophthalate(SM) as raw material to generate ammonolysis reaction for giving 4-isobutoxyisophthalamide(2), 4-isobutoxyisophthalonitrile(3) was generated by dehydration of 2, and the yield of this two-step reaction was 87.9%. After the addition of 3 and thioacetamide, it was cyclized with ethyl chloroacetoacetate to produce ethyl 2-(3-cyano-4-isobutoxyphenyl)-4-methylthiazole-5-carboxylate(5), which was hydrolyzed in an alkaline solution and acidified to obtain febuxostat(1). The total yield was 54.9%(based on SM). The process simplifies the synthesis route of 1, reduces the use of cyanide and other highly toxic chemicals, and its reaction conditions are mild. It is suitable for industrial production of 1.

  • Paper
  • Ranran ZHU , Zhenghua WEI , Shuo HAN , Xinqing ZHAO , Tianen TIAN , Jianyao WANG , Zhikui DONG
    doi: 10.16522/j.cnki.cjph.2023.02.008

    In this study, the synthesis of minodronic acid by phosphorylation was improved. Started from(imidazolo[1,2-a]pyridin-3-yl)acetic acid(2), the phosphorylation was carried out only with phosphorus trichloride in methanesulfonic acid(as solvent). The product was obtained in a yield of 82.4% and a purity of 99.82%. The process did not use phosphorous acid and any organic solvent, so the heterogeneous reaction state was avoided. These reaction conditions were mild, and the production cost was reduced.

  • Paper
  • Yutong ZHANG , Lin ZHU , Fei WU , Tuo JIN
    doi: 10.16522/j.cnki.cjph.2023.02.009

    Granulocyte colony-stimulating factor(1) has a short half-life and is easily hydrolyzed by enzymes, so that it usually requires multiple injections in clinical application, and shows poor patient compliance. In this study, prefabricated polysaccharide particles, 1-dextran(DEX), were respectively prepared by the double aqueous emulsion and double aqueous lyophilization-induced phase separation methods, and then were loaded by poly(lactic-co-glycolic acid)(PLGA) microspheres through the S/O/W emulsion method to improve the stability of 1. The results showed that both two kinds of PLGA microspheres loaded with 1-DEX had homogenous particle size distribution, high encapsulation efficiency(>70%), 75% - 80% of total drug sustained-release in 40 days, and more than 85% of proliferative activity of mouse myeloid leukemia lymphocyte cell lines(NSF-60 cells). The PLGA microspheres loaded with 1-DEX by the two methods could improve the stability of 1 and realize sustained-release for over four weeks, providing a reference for preparing sustained-release microspheres loaded with protein drugs.

  • Paper
  • Lin ZHENG , Li LI , Gang YIN , Ronghui LIAO , Shengqi DENG , Jing TAO
    doi: 10.16522/j.cnki.cjph.2023.02.010

    The paliperidone-loaded pill cores were prepared by the extrusion spheronization process, then the sustained-release pellets were obtained by coating with methacrylic acid copolymer(Eudragit) thin film. The formulation and process parameters of the pill cores and coated pellets were optimized by orthogonal design. The results showed that the in vitro release behavior of the optimal sustained-release pellets coated with the thin film consisted of Eudragit RS30D(which accounted for 65% of the total amount of coating materials) and Eudragit RL30D could be described by first-order kinetic equation.

  • Paper
  • Qianqian ZHAO , Yinghao WANG , Zhiyong XIAO , Qinghua LIU , Yingzheng WANG
    doi: 10.16522/j.cnki.cjph.2023.02.011

    The formulation parameters of the curcumin and piperine co-loaded liposomes were optimized by single factor test, Box-Behnken design and response surface methodology with encapsulation efficiencies of curcumin and piperine as the indexes. The results showed that the liposomes were prepared by thin film hydration method, and the optimal parameters were as follows: the mass ratio of lecithin to cholesterol was 5.16, the volume and temperature of the film-forming solvent was 20 mL and 40 ℃, the hydration medium volume was 20 mL, and the hydration temperature was 60 ℃. The particle size of the obtained optimized liposomes was (95.5±1.8)nm, the ζ potential was (–0.3±0.1)mV. The encapsulation efficiencies of curcumin and piperine were (97.46±0.36)% and (96.74±1.09)%, respectively; while the drug loadings of both drugs were (1.56±0.09)% and (0.07±0.01)%, respectively. The inhibitory effect of the product on the proliferation of human lung cancer cells(A549 cells) was detected by tetramethylazolium salt(MTT) colorimetric method. The results showed that the curcumin and piperine co-loaded liposomes had a stronger inhibitory effect on the proliferation of A549 cells than those of free curcumin and the curcumin liposomes. The results of Transwell migration assay showed that the number of cell migration of A549 cells after incubation with the co-loaded liposomes was significantly reduced, compared with free curcumin and the curcumin liposomes.

  • Paper
  • Peipei CHENG , Hongwei ZHAI , Yuting ZHAO , Lin LONG , Hui HU
    doi: 10.16522/j.cnki.cjph.2023.02.012

    The aim of this paper was to optimize the dry granulation technology of modified Yupingfeng granules. Lactose, dextrin and silicon dioxide were respectively mixed with the modified Yupingfeng extract, followed by dry granulation. Then, an orthogonal test was employed to comprehensively evaluate the properties of the granules with the primary forming rate, moisture absorption rate, rate of dissolving and angle of repose as the indicators. Combined with actual industrial application, the optimal mass ratio of different excipients to the extract was selected as m(lactose)∶m(dextrin)∶m(silicon dioxide)∶m(the extract powder)=0.6∶0.4∶0.05∶1. On the basis of this ratio, the process parameters of dry granulation, namely the wheel speed, wheel rolling pressure and feeding speed, were optimized by the orthogonal test with the single effective particle forming rate, particle bulk density and fragility as indexes. The optimal dry granulation process parameters were as follows: wheel speed was 15 r/min, wheel rolling pressure was 20 MPa, and feeding speed was 80 r/min. The optimized dry granulation process of modified Yupingfeng granules was proved to be stable and feasible based on the pilot-scale test, which could provide a reference for industrial production.

  • Paper
  • Chunhuan LI , Ruiqing XIAN , Weili XUE , Pengfei YOU , Naibin ZHANG
    doi: 10.16522/j.cnki.cjph.2023.02.013

    At present, there is no uniform standard for enoxaparin sodium injection in the pharmacopoeia, and enoxaparin sodium injection belongs to the species with safety risks. Therefore, it is very important to supervise its quality. A follow-up inspection of the product for 3 consecutive years was carried out. The sampling range was wide, the sample specifications were complete, and the representativeness was strong, so the inspection results could better reflect the quality status of enoxaparin sodium injection nationwide. According to the daily supervision and sampling test, combined with the existing research results of national evaluation sampling test, the quality status of more than 200 batches of samples from 8 manufacturers was summarized in this paper, and the quality difference of enoxaparin sodium injection from different enterprises was evaluated. In addition, the quality consistency between the products of domestic enterprise and reference listed drug(RLD) was inspected for the first time; and the quality of RLD marketed in the Chinese market, the US market and the European market was also compared and analyzed for the first time, so as to provide references for the improvement of quality standards and the safety of clinical medication. Through investigations, inspections according to current legal standards, and exploratory research, combined with the comprehensive analysis of the scientificity and rationality of the current standards, it was found that enoxaparin sodium injection still had inconsistencies in quality standards, inconsistencies between prescription and production processes in individual enterprises, and other problems. Therefore, the current quality standards still have defects and need to be further unified and improved.

  • Paper
  • Fan SHE , Hong MIN , Chao FU , Jianguo XUE
    doi: 10.16522/j.cnki.cjph.2023.02.014

    This study investigated the application of isopropyl myristate(IPM) in sample pretreatment for the microbial limit test of water-insoluble preparations. First, the effect of IPM on the growth and detection of microorganisms in the pretreated test sample was determined by the bacteria-adding recovery method. The results showed that its toxicity to microorganisms could be ignored and IPM did not affect the detection of contaminated microorganisms. Subsequently, IPM was used for sample pretreatment of five water-insoluble preparations, and the applicability of the microbial limit method was tested. The results showed that the insoluble preparations could be well dissolved in IPM. The water-insoluble test samples treated with IPM were converted into water-soluble test samples through dissolution-extraction process. The membrane filtration method can be used to eliminate the bacteriostasis of drugs and establish a simple microbial limit test method for corresponding varieties. This study shows that IPM has a good application prospect in the preparation of test solutions of water-insoluble preparations and its potential for the pretreatment of special matrix samples.

  • Paper
  • Ying LI , Xiaoxu HAN , Shusheng YUAN , Xia ZHAO , Xinyue XIAO
    doi: 10.16522/j.cnki.cjph.2023.02.015

    In order to evaluate the quality difference between polypropylene infusion bottles made from domestic pellets and imported pellets, sixteen batches of polypropylene infusion bottles sampled for national evaluation were tested for cytotoxicity, insoluble particles, easy oxides, n-hexane non-volatile materials, light transmittance, haze and contents of the related substances from extraction and dissolution. The results showed that there were no significant differences in easy oxides and insoluble particles in the bottles made from domestic pellets and imported pellets, and the contents of n-hexane non-volatile materials in above bottles were(118.0±30.7) and(137.1±48.2)mg, respectively. In terms of the addition amounts of antioxidants and acid scavengers, their contents in the polypropylene infusion bottles made from domestic pellets and imported pellets were controlled at the same level, which were about 0.05% and 0.25%, respectively. Based on the determination results of small-molecule volatiles, it was speculated that the same polypropylene polymerization catalyst was used in the preparation of domestic pellets and imported pellets. From the analysis of the existing projects, the polypropylene infusion bottles made from domestic pellets and imported pellets had a similar quality level. However, it is still necessary to further expand the eveluation project for a more comprehensive quality comparison.

  • Paper
  • Dongwei WANG , Bo ZHANG , Xiaohui YU , Yunfan DONG , Kai XU
    doi: 10.16522/j.cnki.cjph.2023.02.016

    The key parameters of vacuum decay method for the container closure integrity testing of sterile product packaging system were studied. The key parameters, namely test environment, the residual chamber volume, the sealing property of chamber, the chamber material and the process parameters, that could affect the test results were determined. Then, the tests were carried out to verify the influence of above key parameters by designing and developing research programs. The data showed that the test results could be affected by the above key parameters. It was recommended to control the test environment of 23 ℃ and the relative humidity of 45%. The selected chamber should conform to the overall dimensions of the test samples as much as possible, and the sealing ring should be replaced regularly. It was also recommended to select stainless steel material with stable performance and high sensitivity for chamber and negative samples. The negative samples should be solid or leak free based on the tested samples. The setting of process parameters should take the possible leakage risk points of samples on the basis of different packaging forms and different contents into consideration. And in the actual test, reasonable design and selection of key parameters were required to ensure scientificity of the test results.

  • Pharmaceutical Management & Information
  • Yinghui YU , Shujun YANG , Bin ZHOU
    doi: 10.16522/j.cnki.cjph.2023.02.017
  • Pharmaceutical Management & Information
  • Huaxiang ZHANG , Xiaoling WANG , Xuewei HUA , Hong SU , Wen GUO
    doi: 10.16522/j.cnki.cjph.2023.02.018
News