Home Archive
Archive
2022 Volume 53 Issue 9  Published: 2022-09-10
    Perspectives
  • Yifei TANG , Wenzhe WU , Jian WANG
    doi: 10.16522/j.cnki.cjph.2022.09.001

    The production mode of oral solid dosage forms is gradually changing from batch to continuous manufacturing. Using process analysis technology to analyze and control the critical quality attributes of raw materials, intermediate products and final products can realize high efficiency manufacturing, automatic monitoring, high product quality requirements and real-time release testing. Continuous manufacturing which integrates continuous production lines, process analysis technology and advanced feedback control system is more in line with the concept of pharmaceutical industry 4.0. In this paper, the development and status, the preparation process and application of process analysis technology in oral solid dosage forms are reviewed to provide references for further research.

  • Review
  • Junfang OUYANG , Yongjie ZHANG , Xijing CHEN
    doi: 10.16522/j.cnki.cjph.2022.09.002

    Protein and peptide drugs(PPDs) have good specificity, biocompatibility and good therapeutic effects. Due to the better patient compliance and safety of oral administration route, the oral delivery of PPDs has become one of the current research hotspots in the field of materials science and pharmaceuticals. However, the stability and absorption of oral biomacromolecules in the gastrointestinal tract are restricted. Lipid nanocarriers can effectively encapsulate lipophilic or hydrophilic PPDs through chemical modification, hydrophobic ion pairing and other methods. At the same time, the surface modification of lipid nanocarriers can overcome many physiological barriers of the oral absorption, which in turn promote the dissolution of PPDs in mixed micelles and strengthen lymphatic uptake. Therefore, it has good biocompatibility and high in vivo stability. In this paper, the encapsulation methods of lipid nanocarriers for PPDs and the corresponding mechanisms of overcoming physiological barriers are reviewed, and the important properties and latest research progress of lipid nanocarriers to improve the oral bioavailability of PPDs are introduced, the potential application and development prospects are further prospected as well.

  • Review
  • Sumei ZENG , Wenjian CAI , Shaoqun ZENG , Meicun YAO , Feng YUE
    doi: 10.16522/j.cnki.cjph.2022.09.003

    Wet media milling technology, with the advantages of simple operation, avoiding the use of organic solvents, and high drug loading, has been proven to be a preparation technology for bioavailability enhancement of poorly water-soluble drugs, especially for injectable nanosuspensions. This review summarizes the research progress of injectable nanosuspension prepared by wet media milling technology and introduces the active pharmaceutical ingredients, stabilizers, dispersants, and cryoprotectants. The process parameters and critical quality attributes are also analyzed to provide a basis for the research and development of injectable nanosuspensions prepared by wet media milling technology, so as to promote the transition of safe, effective, quality-controllable injectable nanosuspensions from experimental research to clinical applications at a faster speed.

  • Review
  • Huifang LI , Tianjie YUAN , Shu JIANG
    doi: 10.16522/j.cnki.cjph.2022.09.004

    Oral administration, with the characteristics of high safety and economic convenience, is one of the most common ways of drug delivery. However, the substantial discrepancy between potent therapeutic properties of various medicines and their low oral bioavailability limits their application. In recent years, researches have revealed that gut microbiota, which act as a practical bioreactor in the human intestinal tract, have an essential effect on the discrepancy. In addition to directly participating in drug metabolism through biotransformation, gut microbiota can also indirectly affect bioavailability of oral drugs by regulating the expression levels of host liver metabolic enzymes and the transporters. This review briefly introduces the factors affecting drug bioavailability, and mainly discusses the effects of gut microbiota and probiotics on drug oral bioavailability to provide a reference for understanding the relationship between gut microbiota and drug oral bioavailability, and developing novel strategies for improving drug oral bioavailability.

  • Paper
  • Yuanhu MAO , Fei CHENG , Qing HE , Bin LIU , Lei TANG
    doi: 10.16522/j.cnki.cjph.2022.09.005

    In this paper, the drug finerenone for diabetic nephropathy treatment was synthesized. Firstly, the intermidate ethyl 2-cyanoacetoacetate(6) was prepared with 3,5,5-trimethyl-4,6-dioxacyclohex-2-en-1-one(16) and 3-hydroxypropionitrile, and then react with 4-cyano-2-methoxybenzyaldehyde and 4-amino-5-methylpyridin-2-ol via continuous Knoevenagel condensation and Hantzsch cyclization, respectively. Finally, finerenone was obtained via O-alkylation, hydrolysis, ammonolysis and chiral column resolution with an overall yield of 30.8% (based on 16), and 99.7% HPLC purity as well as 99.4% ee value. The improved process had the advantages of simple operation, mild condition, high yield and low cost.

  • Paper
  • Debao CHEN , Rong SHENG
    doi: 10.16522/j.cnki.cjph.2022.09.006

    Ethyl (1R,5S,6S)-5-(pentan-3-yloxy)-7-oxabicyclo[4.1.0]hept-3-ene-3-carboxylate(2) was the key starting material of oseltamivir phosphate(1). Compound 3, the (1R,5R,6R)-diastereomer of 2, was synthesized as the standard control to evaluate the chiral purity of 2 as well as 1. With shikimic acid as starting material, compound 3 was obtained through esterification, 3-pentanone protection, 5-hydroxybenzylation, reductive ring opening of the ketals,4-hydroxymethylsulfonylation, and alkalic hydrolysis. The structure was conformed by 1H NMR, 13C NMR and ESI-MS.

  • Paper
  • Ying FENG , Guobiao CHU , Xin ZHAO , Zhihui ZHAO , Zhenbo JING
    doi: 10.16522/j.cnki.cjph.2022.09.007

    In this study, the osmotic pressure regulator dosage, the preservative type and dosage in sumatriptan succinate nasal spray as well as its pH value were optimized. Then, the safety of the preparation was evaluated by the bacteriostatic efficacy of benzalkonium chloride, the contents of related substances, rabbit nasal mucosa irritation and guinea pig allergic reaction. And the plasma concentration of sumatriptan in Beagle dogs was determined by LC-MS to assess pharmacokinetic behaviors of the self-made nasal spray and the reference preparation(Imitrex). The results showed that there were no significant differences in pH, osmotic pressure, related substances, and drug content per spray between the self-made sumatriptan succinate nasal spray and the reference preparation, and the product showed no irritation or allergy. After administration of the self-made and reference preparations, the cmax of sumatriptan in dogs were (319.7±149.0) and (296.0±84.5)μg/L, and the tmax were (0.75±0.3) and (0.89±0.63)h, respectively. The relative bioavailability of sumatriptan succinate nasal spray was 105.6%, indicating it was bioequivalent to the reference preparation.

  • Paper
  • Tianjiao WEN , Siying LI , Chan LI , Xinna ZHANG , Jingxia CUI
    doi: 10.16522/j.cnki.cjph.2022.09.008

    In this study, carboplatin long-circulating liposomes A (20 mg/ml) and B (10 mg/ml) were prepared by passive drug loading, and their physicochemical properties were analyzed. The plasma drug concentration was determined by atomic absorption spectrometry to evaluate the pharmacokinetics in rats. The results showed that the prepared carboplatin liposomes had good dispersibility, fluidity and reproducibility, and the particle size was about 100 nm. The AUC of carboplatin long-circulating liposomes A and B were (1 667.87±642.98) and (1 359.43±583.61)h·mg·L–1, respectively, and the cmax were (96.72±27.21) and (63.04±22.15)mg/L, respectively, t1/2 were (15.02±5.72) and(22.90±5.64)h, which were significantly increased compared with the free drug group at the same dose. Carboplatin long-circulating liposomes can prolong the circulation time of the drug in the blood, which is beneficial to increase the drug concentration in the tumor tissue, thereby enhancing the curative effect. This study provided ideas and references for researching new carboplatin dosage forms.

  • Paper
  • Yueying HUANG , Xiaomeng TANG , Zhijun WANG , Yeshuai HU , Hongjie SONG
    doi: 10.16522/j.cnki.cjph.2022.09.009

    In this study, lidocaine hydrochloride bilayer mucoadhesive buccal films were prepared by casting method, which was consisted of the drug-loading layer and the isolation film. Then, the title films were characterized by scanning electron microscopy and attenuated total internal reflectance Fourier-transform infrared spectroscopy. The mechanical properties, pH value, thickness, mass variation, adhesion time, content uniformity, disintegration time and in vitro dissolution of the films were investigated. The results showed that the tensile strength, elongation at break, pH value, thickness, mass variation, adhesion time, and disintegration time of the films were (4.4±0.3)MPa, (10.5±0.7)%,6.06±0.06, (0.105 2±0.012 8)mm, (0.105 0±0.007 0)g, (30±2)min and (3±1)min, respectively. The results of content uniformity also met the requirement. The taste-masking effect was achieved due to the addition of citric acid in the isolation layer.

  • Paper
  • Liping SHEN , Jiawei WANG , Xiao HU , Jianjie JIN , Chunyue HUANG
    doi: 10.16522/j.cnki.cjph.2022.09.010

    The ultra-high performance liquid chromatography(UPLC) fingerprints of Longbishu (1) preparations were established. The methanol extract of 1 preparation was analyzed by UPLC. The Waters ACQUITY UPLC® HSS T3 column(2.1 mm×100 mm, 1.8 μm) was used, and the analysis was carried out in the gradient elution mode with 0.1% phosphoric acid solution as mobile phase A, and acetonitrile as mobile phase B. The flow rate was 0.2 ml/min, the column temperature was 30 ℃, and the detection wavelength was 221 nm. Twelve chromatographic peaks were identified as the common peaks of the control fingerprints of 1 capsules by the Chinese medicine chromatographic fingerprint similarity evaluation system, and nine common peaks were identified by comparing with the standard. Chemometric methods such as similarity analysis, principal component analysis and orthogonal partial least squares analysis were used to analyze thirty-nine batches of 1 capsules and tablets from different manufacturers. The results showed that there were certain differences between 1 capsules and 1 tablets. Among them, five common peaks(peaks 1, 8, 9, 10 and 11) were significantly different, reflecting the differences in the quality of malaytea scurfpea fruit and appendiculate cremastra pseudobulb used by different manufacturers when producing 1 preparations. The established method is simple, rapid, accurate and reproducible, which provides an experimental basis for the quality evaluation of 1 preparations.

  • Paper
  • Kai HUANG , Yayi HU , Wenxia SUN , Youzhi JIA , Hongjuan PAN
    doi: 10.16522/j.cnki.cjph.2022.09.011

    The characteristic peaks of twenty common amino acids were determined by 1H NMR, and eighteen amino acids except cysteine(Cys) were rapidly identified in paediatric compound amino acid injection(18AA-Ⅱ). The interference of overlapping signals was excluded, and the specific proton signal was determined, which was verified by 13C NMR and heteronuclear single quantum coherence spectroscopy(HSQC) spectra to be accurate and effective. And tyrosine(Tyr) and acetyltyrosine(N-acetyl-Tyr) could be quantitatively determined using pyrazine as an internal standard, which provided a direct, rapid, simple and effective method for identifying multi-component amino acid preparations.

  • Paper
  • Zhong LI , Yang WU , Jinju NIE , Qi XU , Yiwen HUANG
    doi: 10.16522/j.cnki.cjph.2022.09.012

    An inductively coupled plasma-mass spectroscopy(ICP-MS) method with matrix-matching method was established for the determination of twenty-four element impurities, namely Cd, Pb, As, Hg, Co, V, Ni, Tl, Pd, Ir, Os, Rh, Ru, Se, Ag, Pt, Li, Sb, Ba, Mo, Cu, Sn, Cr, and Au, in gadopentetate dimeglumine(1). The standard solution was prepared with gadolinium oxide(Gd2O3) as the matrix. The matrix effect was eliminated by the matrix matching method combined with the online multi-element virtual internal standard, and the polyatomic ion interferences were eliminated by the helium collision mode. The results showed that the linear correlation coefficients of twenty-four elements were all more than 0.99. The detection and quantification limits were all met the requirements of the ICH Q3D control threshold. The RSDs(n=6) of the repeatability tests were all less than 15%, and the average recoveries(n=9) were all in the range of 80% - 120%. The established method has high sensitivity and good accuracy, which can effectively eliminate the matrix effect and be used for the determination and risk assessment of twenty-four elemental impurities in 1.

  • Paper
  • Zaixiu PAN , Tiange CHANG , Jian ZHU , Dongmei ZHAO , Zhiling CAO
    doi: 10.16522/j.cnki.cjph.2022.09.013

    An HPLC method was established for the determination of the genotoxic impurities: p-cyano-benzyl dichloride(2) and 4-[chloro(1H-1,2,4-triazol-1-yl)methyl]benzonitrile(3) in letrozole(1). The Alltima C18 column(4.6 mm×250 mm, 5 μm) was used, and the analysis was carried out in the gradient elution mode with water as mobile phase A, and acetonitrile as mobile phase B. The detection wavelength was 230 nm, the column temperature was 25 ℃, and the flow rate was 1.0 ml/min. The results showed that it was linear for 2 and 3 in the ranges of 0.014 8 -0.933 7 μg/ml and 0.028 6 - 0.871 5 μg/ml, respectively. And the average recoveries(n=9) of 2 and 3 were 99.9% and 98.9%, with the RSDs of 0.59% and 0.52%. The established method has good accuracy and high sensitivity, which is suitable for the detection of the genotoxic benzyl chlorides in 1.

  • Paper
  • Xiaofeng WANG , Kai XU , Jing ZHANG , Huijuan WANG , Xinyue XIAO , Rui YANG
    doi: 10.16522/j.cnki.cjph.2022.09.014

    The average degree of substitution(DS) of sulfobutyl ether β-cyclodextrin sodium(SBE-β-CD) was measured by nuclear magnetic resonance spectroscopy, which was taken as the standard value of DS. Then, the infrared spectra of β-cyclodextrin(β-CD) and SBE-β-CD were collected and analyzed by peak assignment to determine the detection wavenumber and the control wavenumber. The linear relationship between the absorbance ratio of the detection wavenumber to the reference wavenumber and the standard value of DS was established according to Lambert-Beer law. Finally, the established DS determination method based on infrared spectroscopy was evaluated. The results showed that the detection wavenumber was about 1 204 cm–1, and the control wavenumber was about 1 081 cm–1. And the linear relationship between absorbance ratio and DS was good. The external corroboration results showed that the DS measured by infrared spectroscopy was basically consistent with the standard value of DS obtained by nuclear magnetic resonance spectroscopy, and the DS results measured by different types of infrared spectrometers were basically the same, which provided a theoretical basis for DS determination of cyclodextrin derivatives.

  • Paper
  • Shaoqiong TIAN , Yuan CHEN , Lei MEI , Huangjing LIN , Yilan ZHANG
    doi: 10.16522/j.cnki.cjph.2022.09.015

    A salting out-headspace gas chromatography method was established for the determination of migration of the ink residual solvents, namely butanone(2), methyl isobutyl ketone(3) and n-butyl alcohol(4), from in three-layer co-extrusion infusion bag in compound electrolyte glucose injection(1). The HP-INNOWAX column(60 m×0.32 mm×0.50 μm) and hydrogen flame ionization detector were used, the column flow rate was 1.2 ml/min, and the injection port temperature was 200 ℃. Anhydrous sodium sulfate(2.5 g) as the salting-out agent was added to the headspace vial. The results showed it was linear for 2, 3 and 4 in the corresponding concentration ranges, the detection limits were 0.006, 0.002 6, 0.012 μg/ml, and the average recoveries(n=3) were 100.9%, 104.4%, 96.1%, with the RSDs of 4.1%, 6.2%, and 6.2%, respectively. The established method has good specificity, high sensitivity and simple operation, which can be used to determine the migration of 2, 3 and 4 in 1.

  • Paper
  • Dongfeng XIE , Bing YI , Qiang GAO , Jun HE , Zhefeng WANG
    doi: 10.16522/j.cnki.cjph.2022.09.016

    Seven crystalline forms of aripiprazole were prepared in this study, namely two medicinal forms(the hydrate and form Ⅲ) and nonmedicinal forms(Ⅰ, Ⅱ, Ⅳ, Ⅴ and hemiethanolate). The polymorphisms of aripiprazole can be obtained by recrystallization from a single solvent or a mixed solvents or heating at different temperatures, and they were characterized by powder X-ray diffractometry(PXRD), differential scanning calorimetry(DSC), thermogravimetric analysis(TGA) and polarizing microscopy. In this paper, three new preparation methods were developed. The experimental results showed that the monohydrate and the hemiethanolate could be transformed into form Ⅲ after heating, while forms Ⅲ, Ⅳ and Ⅴ could be transformed into formⅠby heated directly at different temperatures. In addition, these transformations did not result in the formation of the related substances.

  • Paper
  • Xinna LIU , Yancui ZHANG , Keqian DI , Xuejiao LI , Xinghua ZHAO
    doi: 10.16522/j.cnki.cjph.2022.09.017

    In this study, magnolol(1)-tetramethylpyrazine(2) cocrystal was prepared through crystal engineering technology to improve the solubility of 1 and make up for the shortcoming of low sublimation temperatme of 2. The 1-2 cocrystal was prepared by ball milling or rotary evaporation methods, and the single crystal was obtained by the slow volatilization. Its physical and chemical properties including solubility and sublimation performance in vitro were characterized. Single crystal structure analysis showed that the ratio of 1 to 2 in the asymmetric unit of 1-2 cocrystal was 2∶1, which belonged to the P-1 space group, and strong hydrogen bonds(-O-H···N) were formed between -OH group in 1 and N atom in 2. The powder solubility results showed that the maximum apparent solubility of 1 in the 1-2 cocrystal was (18.63±0.17)μg/ml, which was about 4.7 times that of 1. The results showed that the weight loss rate of 2 in 24 h was about 49.03% at 25 ℃ and 10% of relative humidity(RH), while no weight loss was observed for 1 and 1-2 cocrystal under the same condition. The results indicated that the 1-2 cocrystal increased the solubility of 1, and significantly improved the physical stability of 2. This study can expand the clinical applications of 1 and 2, and provides a reference for improving the solubility of other poorly soluble Chinese herbal ingredients.

  • Paper
  • Hongbo ZHAO , Gaofa HE , Xuehui LIANG , Jianbing REN , Jiale CHEN
    doi: 10.16522/j.cnki.cjph.2022.09.018

    Thickness of coating film of pellets is one of the important indicators of quality evaluation. A method for online measurement of coating film thickness based on the image analysis approach was developed in order to accurately assess coating thickness and enhance coating quality. The timely images of the pellets during the coating process were taken by the industrial camera array that was arranged around the cavity of the fluidized bed. The current statistical average diameter of the pellets was obtained by image processing, and then the average thickness of the coating film was calculated. In order to solve the problem of false contours caused by pellet adhesion in image processing, “the comparative coordinate method” was proposed for identifying contours that can accurately distinguish false contours from target contours. Compared with the traditional contour separation algorithm, “the comparative coordinate method” could preserve the size of the original contour region to the greatest extent. Pellet cores with diameters of 0.6, 1.0 and 1.4 mm were used for coating experiments in a fluidized bed. Then, the real time diameter and coating thickness of the particles after different coating time were measured. Finally, the microscopic measurement method was used for comparison and verification. The experimental results showed that the method proposed in this paper could accurately measure the thickness of coating film in a fluidized bed process.

  • Paper
  • Li DONG , Bo LI , Kun YANG , Huiming ZHANG , Yu HAN , Ruiping HAN
    doi: 10.16522/j.cnki.cjph.2022.09.019

    The data for temperature and pressure was fitted in the internationally recognized Antoine equation to investigate the relationship between temperature and pressure of saturated steam in commonly used autoclaves. The nonlinear least square method was used to solve the problem. The quality of the fitting effect was evaluated by the sum of square of error(SSE), root mean square error(RMSE), correlation coeffictent(R2), and residual in statistics. For verification, the least squares method was brought into our company's sterilizer steam pipeline system. The results showed that the fitting had good suitability and consistency. This study provides reference suggestions for the verification of autoclaves.

  • Pharmaceutical Management & Information
  • Hongwei CHANG
    doi: 10.16522/j.cnki.cjph.2022.09.020
  • Pharmaceutical Management & Information
  • Jie MA , Jianyao WANG , Zhikui DONG , Yongyu OU
    doi: 10.16522/j.cnki.cjph.2022.09.021
  • Pharmaceutical Management & Information
  • Yaping FENG , Lirong CAO
    doi: 10.16522/j.cnki.cjph.2022.09.022
News