收藏切换
Development of Cleaning Process for Solution Preparation Unit
收藏切换
Zhijun ZHOU, Feifei WANG, Li LI, Ying ZHAO, Yu LIU, Ren HAN*
Chinese Journal of Pharmaceuticals | 2025, 56(12) : 1576 - 1582
Less
收藏切换
Chinese Journal of Pharmaceuticals | 2025, 56(12): 1576-1582
• Paper •
Development of Cleaning Process for Solution Preparation Unit
Full
Zhijun ZHOU, Feifei WANG, Li LI, Ying ZHAO, Yu LIU, Ren HAN*
Affiliations
  • Scientific  Research  and  Development  Dept.,  Sinopharm  Wuhan  Biopharmaceuticals  Co.,  Ltd., Wuhan 430207
Published: 2025-12-10 doi: 10.16522/j.cnki.cjph.2025.12.012
Outline
收藏切换

To develop the cleaning procedure for in situ cleaning(CIP) of solution preparation unit in biopharmaceutical production, this study optimized the process in two phases. In the first phase, the water storage step for water for injection cleaning in the original procedure was eliminated. After cleaning 5 tanks and pipelines, full inspections were performed on the collected samples. Subsequently, microbial limit tests were conducted daily for 3 consecutive days, and this entire process was repeated for 3 rounds. The minimum value of the post-cleaning hold time across the 3 rounds was defined as the post-cleaning hold time. In the second phase, the optimized procedure was divided into two CIP processes: post-production CIP(pre-cleaning with purified water + alkaline cleaning) and the pre-production CIP(cleaning with purified water + water for injection). Representative tanks and the most difficult-to-clean components were selected.Sampling and testing were carried out after adhering to the preset dirt hold time, alkaline hold time, and post-cleaning hold time. This phase was repeated for 2 rounds. Finally, the key parameters of the cleaning process(including the CIP procedure,pre-cleaning hold time, alkaline hold time, and post-cleaning hold time) were determined for use in the concurrent cleaning validation during production.

biopharmaceutical product  /  solution preparation unit  /  cleaning process  /  in situ cleaning  /  pre-cleaning hold time  /  alkaline hold time  /  post-cleaning hold time
周志军, 汪菲菲, 黎丽, 赵颖, 刘宇, 韩韧. 配液单元清洁工艺的开发. 中国医药工业杂志, 2025 , 56 (12) : 1576 -1582 . DOI: 10.16522/j.cnki.cjph.2025.12.012
Zhijun ZHOU, Feifei WANG, Li LI, Ying ZHAO, Yu LIU, Ren HAN. Development of Cleaning Process for Solution Preparation Unit[J]. Chinese Journal of Pharmaceuticals, 2025 , 56 (12) : 1576 -1582 . DOI: 10.16522/j.cnki.cjph.2025.12.012
Year 2025 volume 56 Issue 12
26
7
Cite this Article
BibTeX
Article Info
doi: 10.16522/j.cnki.cjph.2025.12.012
  • Receive Date:2025-08-04
  • Online Date:2026-11-18
  • Published:2025-12-10
Article Data
Affiliations
History
  • Received:2025-08-04
Affiliations
    Scientific  Research  and  Development  Dept.,  Sinopharm  Wuhan  Biopharmaceuticals  Co.,  Ltd., Wuhan 430207
References
Share
https://castjournals.cast.org.cn/joweb/zgyygy/EN/10.16522/j.cnki.cjph.2025.12.012
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT