The nanosuspension of phillygenin(1) was prepared by wet grinding technique, then the pellets were prepared with coating liquid consisted of the above nanosuspension, hydroxypropyl methylcellulose, lactose and mannitol by the bottom-spray fluid bed method to improve the stability. The parameters of the coating process were optimized by single factor test and central composite design-response surface methodology. The obtained optimal parameters were as follows: the viscosity of coating solution was 130 mPa·s; the temperature of inlet air was 50 ℃; and the rate of feed was 12 r/min. The average particle size of the optimal nanosuspension and pellets(the redispersed suspension) stored at room temperature for three months were (265.5±5.9) and (220.6±3.8)nm, and polydispersity index were 0.253±0.071 and 0.199±0.069, indicating the stability of nano-sized crystals of 1 was improved by solidification process. The results of in vitro dissolution test showed that the dissolution profiles of nanosuspension and pellets in various pH media were significantly enhanced, compared with the micronized bulk drug.
| 科 Family | 属数 Number of genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) | 属 Genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) |
|---|---|---|---|---|---|---|
| 鹅膏菌科Amanitaceae | 2 | 11 | 5.26 | 鹅膏菌属 Amanita | 10 | 4.78 |
| 小菇科 Mycenaceae | 2 | 12 | 5.74 | 丝盖伞属 Inocybe | 5 | 2.39 |
| 多孔菌科 Polyporaceae | 8 | 14 | 6.70 | 蜡蘑属 Laccaria | 5 | 2.39 |
| 红菇科 Russulaceae | 3 | 23 | 11.00 | 小皮伞属 Marasmius | 6 | 2.87 |
| 小菇属 Mycena | 11 | 5.26 | ||||
| 光柄菇属 Pluteus | 5 | 2.39 | ||||
| 红菇属 Russula | 17 | 8.13 | ||||
| 栓菌属 Trametes | 5 | 2.39 |