This study aimed to establish a top spray granulation for ibuprofen arginine(Ibu-Arg) granules by fluid-bed technology based on Quality by Design(QbD) concept and approach. The quality target product profile(QTPP) and critical quality attributes(CQAs) of Ibu-Arg granules were firstly identified. The relevant CQAs for top spray granulation process were screened out by risk assessment. The percent of the labeled content and particle size distribution(PSD) were selected as the key responses. Risk assessment on critical process parameters(CPPs) was performed by failure mode and effect analysis(FMEA) methodology. By the results of FMEA, spray rate and atomization pressure were screened out as the high-risk process variables to be further studied. A center composite design(CCD) was employed for process optimization. Experimental results were analyzed by response surface methodology(RSM), process parameters model was established for exploration of design space and optimized operation conditions by Design Expert 10 software. The optimized process parameters were established as follows: inlet air volume 55 – 70 m3/h, product temperature 40 – 45 ℃, atomization pressure 80 - 120 kPa and spray rate 17.5 – 18.5 g/min. By implementing validated experiments, the process was confirmed to be robust with high yield, the product CQAs such as the percent of the labeled content and PSD complied with quality requirements.
| 科 Family | 属数 Number of genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) | 属 Genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) |
|---|---|---|---|---|---|---|
| 鹅膏菌科Amanitaceae | 2 | 11 | 5.26 | 鹅膏菌属 Amanita | 10 | 4.78 |
| 小菇科 Mycenaceae | 2 | 12 | 5.74 | 丝盖伞属 Inocybe | 5 | 2.39 |
| 多孔菌科 Polyporaceae | 8 | 14 | 6.70 | 蜡蘑属 Laccaria | 5 | 2.39 |
| 红菇科 Russulaceae | 3 | 23 | 11.00 | 小皮伞属 Marasmius | 6 | 2.87 |
| 小菇属 Mycena | 11 | 5.26 | ||||
| 光柄菇属 Pluteus | 5 | 2.39 | ||||
| 红菇属 Russula | 17 | 8.13 | ||||
| 栓菌属 Trametes | 5 | 2.39 |