收藏切换
Investigation on Model Building Methods for Determination of Release Rate of Ibuprofen Sustained-release Capsules Based on Online UV Process Analytical Technology
收藏切换
Yanshun SHI1, Baoming NING2, Qihang ZHU1, Teng WANG1, Xuezhong WANG1, *
Chinese Journal of Pharmaceuticals | 2026, 57(1) : 87 - 96
Less
收藏切换
Chinese Journal of Pharmaceuticals | 2026, 57(1): 87-96
• Paper •
Investigation on Model Building Methods for Determination of Release Rate of Ibuprofen Sustained-release Capsules Based on Online UV Process Analytical Technology
Full
Yanshun SHI1, Baoming NING2, Qihang ZHU1, Teng WANG1, Xuezhong WANG1, *
Affiliations
  • 1.Beijing Key Lab. of Enze Biomass and Fine Chemicals, College of New Materials and Chemical Engineering, Beijing Institute of Petrochemical Technology, Beijing 102617
  • 2.Key Lab. of Research and Evaluation of Chemical Drug Quality, Key Lab. of National Medical Products Administration, National Institutes for Food and Drug Control, Beijing 102629
Published: 2026-01-10 doi: 10.16522/j.cnki.cjph.2026.01.009
Outline
收藏切换

Based on ultraviolet spectral data from the release processes of ibuprofen sustained-release capsules produced by two manufacturers, this study aimed to develop a modelling approach for real-time online monitoring of drug release behavior using an online UV spectrophotometer. The research focused on the application of a genetic algorithm for automatic feature wavelength selection and partial least squares(PLS) modelling. During the release tests, multiple samples were taken and analyzed offline by HPLC to determine ibuprofen content. A total of 165 release solution samples were collected from 10 experiments, with their results serving as calibration data for the online UV method and reference values for validation. The performance of full-spectrum PLS models was compared with that of PLS models built based on feature wavelengths selected by the genetic algorithm. The results showed that the PLS model based on genetically selected feature wavelengths performed better. The optimal model demonstrated a training set prediction performance with adjusted R-squared() of 0.992 6 and a root mean square error(RMSEC) of 0.017 1. The average relative error for the test set was 3.52%. The model predictions showed good agreement with offline HPLC results. A paired t-test was used to compare the release behaviors of the capsules from the two manufacturers, and the results showed a statistically significant difference(P<0.05). Furthermore, the cumulative release rates of products from both manufacturers were found to be below the corresponding pharmacopoeial requirements in some cases, which deserved attention in pharmaceutical quality control.

ibuprofen sustained-release capsule  /  in vitro release  /  online detection  /  process analytical technology  /  partial least squares  /  genetic algorithm  /  ultraviolet spectroscopy
史言顺, 宁保明, 朱启航, 王腾, 王学重. 基于在线紫外过程分析技术测定布洛芬缓释胶囊释放速率的建模方法考察. 中国医药工业杂志, 2026 , 57 (1) : 87 -96 . DOI: 10.16522/j.cnki.cjph.2026.01.009
Yanshun SHI, Baoming NING, Qihang ZHU, Teng WANG, Xuezhong WANG. Investigation on Model Building Methods for Determination of Release Rate of Ibuprofen Sustained-release Capsules Based on Online UV Process Analytical Technology[J]. Chinese Journal of Pharmaceuticals, 2026 , 57 (1) : 87 -96 . DOI: 10.16522/j.cnki.cjph.2026.01.009
Year 2026 volume 57 Issue 1
135
39
Cite this Article
BibTeX
Article Info
doi: 10.16522/j.cnki.cjph.2026.01.009
  • Receive Date:2025-06-04
  • Online Date:2026-11-05
  • Published:2026-01-10
Article Data
Affiliations
History
  • Received:2025-06-04
Funding
Affiliations
    1.Beijing Key Lab. of Enze Biomass and Fine Chemicals, College of New Materials and Chemical Engineering, Beijing Institute of Petrochemical Technology, Beijing 102617
    2.Key Lab. of Research and Evaluation of Chemical Drug Quality, Key Lab. of National Medical Products Administration, National Institutes for Food and Drug Control, Beijing 102629
References
Share
https://castjournals.cast.org.cn/joweb/zgyygy/EN/10.16522/j.cnki.cjph.2026.01.009
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT