Twin screw granulation(TSG) is a commonly used process for the continuous manufacturing of oral solid dosage forms. However, due to the fact that the granules obtained under high shear forces during the TSG process are denser and high molecular weight hydrophilic matrix materials are difficult to co-extrude, the application of TSG in hydrophilic gel matrix tablets, especially gastric floating hydrophilic gel matrices, is limited. At present, most matrix tablets are still prepared by high-shear granulation followed by the external addition of HPMC and subsequent tableting. In this study, by optimizing the screw design and process parameters, the feasibility of achieving “one-step” TSG granulation of floating extended-release matrix granules based on HPMC was investigated. The flowability, density, particle size of the granules, and the buoyancy, gel strength, and dissolution profile of the tablets were used as response parameters to optimize process parameters such as the number of kneading blocks, the staggering angle of kneading elements, the intervals between mixing zones, barrel temperature, liquid-to-solid ratio, mass feeding rate, and screw speed. The results showed that the screw design and process parameters had a potential impact on the properties of the prepared granules and hydrophilic gel matrix tablets, and the continuous production of gastric floating extended-release matrices could be achieved by optimizing relevant parameters.
| 科 Family | 属数 Number of genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) | 属 Genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) |
|---|---|---|---|---|---|---|
| 鹅膏菌科Amanitaceae | 2 | 11 | 5.26 | 鹅膏菌属 Amanita | 10 | 4.78 |
| 小菇科 Mycenaceae | 2 | 12 | 5.74 | 丝盖伞属 Inocybe | 5 | 2.39 |
| 多孔菌科 Polyporaceae | 8 | 14 | 6.70 | 蜡蘑属 Laccaria | 5 | 2.39 |
| 红菇科 Russulaceae | 3 | 23 | 11.00 | 小皮伞属 Marasmius | 6 | 2.87 |
| 小菇属 Mycena | 11 | 5.26 | ||||
| 光柄菇属 Pluteus | 5 | 2.39 | ||||
| 红菇属 Russula | 17 | 8.13 | ||||
| 栓菌属 Trametes | 5 | 2.39 |