收藏切换
Research and Solution of Tablet Fragmentation in the Feeding Process of the Hole Feeding Device
收藏切换
Shun TANG, Honghui XU, Yunwei WANG, Xiaofan YUAN, Xiuhui XU
Chinese Journal of Pharmaceuticals | 2024, 55(7) : 1008 - 1015
Less
收藏切换
Chinese Journal of Pharmaceuticals | 2024, 55(7): 1008-1015
• Paper •
Research and Solution of Tablet Fragmentation in the Feeding Process of the Hole Feeding Device
Full
Shun TANG, Honghui XU, Yunwei WANG, Xiaofan YUAN, Xiuhui XU
Affiliations
  • Hangzhou Conba Pharmaceutical Co., Ltd., Hangzhou 310052
Published: 2024-07-10 doi: 10.16522/j.cnki.cjph.2024.07.015
Outline
收藏切换

In this paper, the stress of tablets in the hole feeding device of aluminum plastic packaging machine(hereinafter referred to as the feeding device) was analyzed, and solutions to the problem of tablet fragmentation in the feeding process were proposed through calculation and experimentation. The fragmentation rate and cavitation rate of the tablets during the feeding process were taken as the evaluation indexes. Based on the single factor test, Minitab 15.0 software was used to optimize the setting parameters of falling height, vibration frequency and guide groove radian of the vibrating disk in the feeding device, and the fitting models were analyzed. The mechanical analysis results showed that the tablets were obviously stressed in the vibrating plate, guide groove and blanking track of the feeding device. In this study, the optimal conditions were as follows: selecting the tablets with an average hardness of 45 N as the models, the gas pressure of the vibrating plate was 0.16 MPa, the accumulation thickness of the tablets on the vibrating plate was 2.5 cm, the vibration frequency was 37.00 Hz, the falling height of the vibrating plate was 3.00 mm, and the radian of the guide groove of the vibrating plate was 95.00°. A continuous production was conducted under above conditions and at the speed of 200 plates per 1 min for 6 h, the fragmentation rate in the feeding process could be reduced to 0, and the cavitation rate was only 1.44%. In addition, increasing the hardness of the tablet can improve its own mechanical strength, thereby improving the problem of tablet fragmentation.

aluminum plastic packaging  /  feeding device  /  tablet fragmentation  /  solution
唐顺, 徐洪辉, 王云蔚, 袁晓凡, 徐秀卉. 对孔下料器下料过程中破片问题的研究与解决方案. 中国医药工业杂志, 2024 , 55 (7) : 1008 -1015 . DOI: 10.16522/j.cnki.cjph.2024.07.015
Shun TANG, Honghui XU, Yunwei WANG, Xiaofan YUAN, Xiuhui XU. Research and Solution of Tablet Fragmentation in the Feeding Process of the Hole Feeding Device[J]. Chinese Journal of Pharmaceuticals, 2024 , 55 (7) : 1008 -1015 . DOI: 10.16522/j.cnki.cjph.2024.07.015
Year 2024 volume 55 Issue 7
20
4
Cite this Article
BibTeX
Article Info
doi: 10.16522/j.cnki.cjph.2024.07.015
  • Receive Date:2023-10-18
  • Online Date:2026-11-18
  • Published:2024-07-10
Article Data
Affiliations
History
  • Received:2023-10-18
Affiliations
    Hangzhou Conba Pharmaceutical Co., Ltd., Hangzhou 310052
References
Share
https://castjournals.cast.org.cn/joweb/zgyygy/EN/10.16522/j.cnki.cjph.2024.07.015
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT