Home Journals Articles Updates About
CN
image
收藏切换
Effect of Single-Pass Large Deformation Rolling on Microstructure and Mechanical Properties of Mg-1.5Mn-0.3Ce Alloy
收藏切换
Shuo LI1, Hucheng PAN1, Zhen PAN1, Jie SONG1, Chang ZHU1, Wei LIU1, Gaowu QIN1, 2
Materials China | 2026, 45(10) : 1086 - 1095
Less
收藏切换
Materials China | 2026, 45(10): 1086-1095
• Research Report •
Effect of Single-Pass Large Deformation Rolling on Microstructure and Mechanical Properties of Mg-1.5Mn-0.3Ce Alloy
Full
Shuo LI1, Hucheng PAN1, Zhen PAN1, Jie SONG1, Chang ZHU1, Wei LIU1, Gaowu QIN1, 2
Affiliations
  • 1.Key Laboratory for Anisotropy and Texture of Materials, Ministry of Education, School of Materials Science and Engineering, Northeastern University, Shenyang 110819, China
  • 2.School of Materials Science and Engineering, Shenyang University of Chemical Technology, Shenyang 110142, China
Published: 2026-10-20 doi: 10.7502/j.issn.1674-3962.202412004
Outline
收藏切换

Aiming at the bottleneck problems of long process flow and high cost of traditional magnesium alloy sheet preparation, commercial Mg-1.5Mn-0.3Ce alloy sheet was prepared by extrusion and subsequent single-pass rolling process, and its microstructure and mechanical properties were systematically studied. The results show that the strength of the extruded Mg-1.5Mn-0.3Ce alloy rolled at 250 ℃ increases with the increase of single-pass deformation amount. With 48% deformation amount, the alloy has the highest strength in the transverse direction. The yield strength and tensile strength reach 242.9 MPa and 270.0 MPa, respectively, and the elongation after fracture is ~11.8%. After rolling with 48% deformation amount, the grain size is refined from 6.2 to 2.6 μm. A large number of nano-sized α-Mn and Mg12Ce particles are dispersed in the sheet, and high-density residual dislocations are accumulated around the nano-sized second phase particles, which improve the strength of the rolled alloy. Therefore, this work can provide a favorable reference and basis for the the preparation process optimization of low-cost and high-performance magnesium alloy sheets.

magnesium alloy sheet  /  second phase  /  recrystallization  /  rolling  /  high strength and ductility
李硕, 潘虎成, 潘震, 宋杰, 朱畅, 刘威, 秦高梧. 单道次大变形轧制对Mg-1.5Mn-0.3Ce合金的微观组织与力学性能的影响. 中国材料进展, 2026 , 45 (10) : 1086 -1095 . DOI: 10.7502/j.issn.1674-3962.202412004
Shuo LI, Hucheng PAN, Zhen PAN, Jie SONG, Chang ZHU, Wei LIU, Gaowu QIN. Effect of Single-Pass Large Deformation Rolling on Microstructure and Mechanical Properties of Mg-1.5Mn-0.3Ce Alloy[J]. Materials China, 2026 , 45 (10) : 1086 -1095 . DOI: 10.7502/j.issn.1674-3962.202412004
Appendix
Less
Year 2026 volume 45 Issue 10
83
12
Cite this Article
BibTeX
Article Info
doi: 10.7502/j.issn.1674-3962.202412004
  • Receive Date：2024-12-04
  • Online Date：2026-10-16
  • Published：2026-10-20
Article Data
Affiliations
History
  • Received：2024-12-04
  • Revised：2025-11-19
Funding
Affiliations
    1.Key Laboratory for Anisotropy and Texture of Materials, Ministry of Education, School of Materials Science and Engineering, Northeastern University, Shenyang 110819, China
    2.School of Materials Science and Engineering, Shenyang University of Chemical Technology, Shenyang 110142, China
References
Share
https://castjournals.cast.org.cn/joweb/zgcljz/EN/10.7502/j.issn.1674-3962.202412004
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family		 属数
Number of
genus		 种数
Number of
species		 占总种数比例
Percentage of
total species (%)		 属
Genus		 种数
Number of
species		 占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT
Links
Articles
Latest Articles
Most Read
Collections
Updates
Events
News
Multimedia
About
About Us
Contact
No. 86 Xueyuan South Road, Haidian District, Beijing
100081
010-62662699(Operation and Technical Support)
qkjq@cast.org.cn

Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House