收藏切换
Mechanical response of high pre-tightening stress uniformly distributed bolt under static-dynamic load
收藏切换
PDF
Junling HOU1, 2, 3, Chuiyu LI1, **, Tongli HUANG3, Lin YUAN3, Shiyang LIU4, Ping HUANG2
China Safety Science Journal | 2025, 35(1) : 50 - 59
Less
收藏切换
China Safety Science Journal | 2025, 35(1): 50-59
Safety engineering technology
Mechanical response of high pre-tightening stress uniformly distributed bolt under static-dynamic load
Full
Junling HOU1, 2, 3, Chuiyu LI1, **, Tongli HUANG3, Lin YUAN3, Shiyang LIU4, Ping HUANG2
Affiliations
  • 1 School of Civil Architecture, Anhui University of Technology, Huainan Anhui 232001, China
  • 2 Panzhihua University, Panzhihua Sichuan 617001, China
  • 3 School of Mining Engineering,Anhui University of Science and Technology, Huainan Anhui 232001, China
  • 4 Huainan Mining ( Group ) Co., Ltd., Huainan Anhui 232001, China
Published: 2025-01-28 doi: 10.16265/j.cnki.issn1003-3033.2025.01.1389
Outline
收藏切换

In order to solve the problem of bolt breaking and losing anchor due to the influence of strong mining stress in deep mining roadway, and effectively improve the pre-tightening force of the bolt, a stress uniform bolt with high pre-tightening force was designed. The theoretical analysis, static load drawing and drop hammer impact test, numerical calculation and DIC method were used to study the load-displacement distribution characteristics of the bolt in the process of static load drawing, and the stress concentration position of the bolt was obtained. The mechanical response characteristics of the bolt under dynamic load were studied by using Ansys numerical simulation of drop hammer impact test and SHPB impact test. The results show that the thread deformation of the ordinary bolt nut decreases exponentially along the axial direction away from the extrusion surface, and the strain is concentrated in the first three circles of the thread. The stress uniformly distributed bolt can achieve thread strain coordination, and the mechanical environment is good. The change of bolt axial force is divided into a rising zone, an oscillating zone and a stable zone. When the drop hammer impulse is the same, the stress uniform distribution bolt can reduce the impact force to 64% of the original, and reduce the amplitude frequency of bolt axial force. The stress uniform distribution bolt can reduce the amplitude and frequency of the stress wave waveform. The research results have been applied to deep roadways such as Zhuji mine, Paner mine and Dingji mine. The bolt has no broken anchor phenomenon, and the control effect of the roadway surrounding rock is good.

pre-tightening force  /  stress uniformly distributed anchor bolt  /  static load  /  movable load  /  mechanical response  /  digital image correlation (DIC)  /  bolt broken  /  drop hammer impact  /  Hopkinson pressure bar (SHPB)
Junling HOU, Chuiyu LI, Tongli HUANG, Lin YUAN, Shiyang LIU, Ping HUANG. Mechanical response of high pre-tightening stress uniformly distributed bolt under static-dynamic load[J]. China Safety Science Journal, 2025 , 35 (1) : 50 -59 . DOI: 10.16265/j.cnki.issn1003-3033.2025.01.1389
Year 2025 volume 35 Issue 1
PDF
382
157
Cite this Article
BibTeX
Article Info
doi: 10.16265/j.cnki.issn1003-3033.2025.01.1389
  • Receive Date:2024-08-15
  • Online Date:2025-07-05
  • Published:2025-01-28
Article Data
Affiliations
History
  • Received:2024-08-15
  • Revised:2024-10-15
Funding
Affiliations
    1 School of Civil Architecture, Anhui University of Technology, Huainan Anhui 232001, China
    2 Panzhihua University, Panzhihua Sichuan 617001, China
    3 School of Mining Engineering,Anhui University of Science and Technology, Huainan Anhui 232001, China
    4 Huainan Mining ( Group ) Co., Ltd., Huainan Anhui 232001, China
References
Share
https://castjournals.cast.org.cn/joweb/zgaqkxxb/EN/10.16265/j.cnki.issn1003-3033.2025.01.1389
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT