收藏切换
Reconstruction and analysis of PNM for free accumulation of rock blocks in fully mechanized top-coal caving goaf of coal mines
收藏切换
PDF
Hongshuo ZHANG1, 2, Ke GAO**, 1, 2, Jiankang YU1, 2, Qiwen LI1, 2
China Safety Science Journal | 2026, 36(2) : 153 - 162
Less
收藏切换
China Safety Science Journal | 2026, 36(2): 153-162
Safety Technology and Engineering
Reconstruction and analysis of PNM for free accumulation of rock blocks in fully mechanized top-coal caving goaf of coal mines
Full
Hongshuo ZHANG1, 2, Ke GAO**, 1, 2, Jiankang YU1, 2, Qiwen LI1, 2
Affiliations
  • 1College of Safety Science and Engineering, Liaoning Technical University, Huludao Liaoning 125105, China
  • 2Key Laboratory of Mine Thermodynamic Disasters and Control of Ministry of Education, Liaoning Technical University, Huludao Liaoning 125105, China
Published: 2026-02-28 doi: 10.16265/j.cnki.issn1003-3033.2026.02.1508
Outline
收藏切换

To accurately characterize freely accumulated rock blocks and pore space properties in fully mechanized top-coal caving goafs, a PNM was introduced. Slice tests of free rock block accumulation in fixed space and corresponding image processing were conducted. Pore network information was extracted using Open-source libraries like OpenPNM and PoreSpy, followed by 3D visual reconstruction and quantitative characterization of PNM to analyze topological geometric and statistical features of the reconstructed model. Results show that with increasing freely accumulated rock block size in fixed space, pore-throat size increases significantly: the average diameters of pores and throats rise from 2.46 mm and 1.41 mm to 3.85 mm and 2.73 mm, respectively, with weak correlation to throat length. The numbers of pores and throats decrease from 3 146 and 6 428 to 1 043 and 2 225, respectively, and the pore coordination numbers concentrate between 2 and 5 (peak at 2). The proportion of pore space increases, and the connectivity of porous media is enhanced. The topological property parameters are approximately positively skewed distribution as a whole, with the peak shewed to the left and the concentrated values in the dataset being relatively small. Two-point correlation function calculations reveal that the relative errors of porosity between the original image data and the reconstructed model are less than 2.5%.

fully mechanized top-coal caving goaf of coal mines  /  free accumulation of rock blocks  /  pore network model (PNM) reconstruction  /  slice test  /  image processing  /  sub-network of an over-segmented watershed (SNOW)  /  pore network extraction (PNE)
Hongshuo ZHANG, Ke GAO, Jiankang YU, Qiwen LI. Reconstruction and analysis of PNM for free accumulation of rock blocks in fully mechanized top-coal caving goaf of coal mines[J]. China Safety Science Journal, 2026 , 36 (2) : 153 -162 . DOI: 10.16265/j.cnki.issn1003-3033.2026.02.1508
Year 2026 volume 36 Issue 2
PDF
75
21
Cite this Article
BibTeX
Article Info
doi: 10.16265/j.cnki.issn1003-3033.2026.02.1508
  • Receive Date:2024-12-10
  • Online Date:2026-07-08
  • Published:2026-02-28
Article Data
Affiliations
History
  • Received:2024-12-10
  • Revised:2025-12-22
Funding
Affiliations
    1College of Safety Science and Engineering, Liaoning Technical University, Huludao Liaoning 125105, China
    2Key Laboratory of Mine Thermodynamic Disasters and Control of Ministry of Education, Liaoning Technical University, Huludao Liaoning 125105, China
References
Share
https://castjournals.cast.org.cn/joweb/zgaqkxxb/EN/10.16265/j.cnki.issn1003-3033.2026.02.1508
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT