收藏切换
Parametric sensitivity study of seismic response for deep-water rigid frame bridge in near-fault canyon sites
收藏切换
PDF
Sibo MENG1, Shitao WEI2, Zhongxian LIU1, 2, Xi CHENG3, Wenxuan LI2
Journal of Vibration Engineering | 2025, 38(8) : 1922 - 1934
Less
收藏切换
Journal of Vibration Engineering | 2025, 38(8): 1922-1934
Parametric sensitivity study of seismic response for deep-water rigid frame bridge in near-fault canyon sites
Full
Sibo MENG1, Shitao WEI2, Zhongxian LIU1, 2, Xi CHENG3, Wenxuan LI2
Affiliations
  • 1.Tianjin Key Laboratory of Structural Protection and Reinforcement for Civil Engineering and Architecture,Tianjin Chengjian University,Tianjin 300384,China
  • 2.School of Civil Engineering,Tianjin Chengjian University,Tianjin 300384,China
  • 3.China Railway 19th Bureau Group Guangzhou Engineering Co., Ltd., Guangzhou 511455,China
Published: 2025-08-10 doi: 10.16385/j.cnki.issn.1004-4523.202309066
Outline
收藏切换

A large number of high-pier rigid frame bridges in the canyon areas are located in near-fault regions (hereinafter referred to as near-fault),and the seismic analyses should comprehensively consider the near-fault effect,site effect,and fluid-structure interaction when they are located in the water environment such as rivers,reservoirs,etc. Currently,most near-fault seismic records are used as consistent inputs,which may underestimate the seismic response of the bridges. At the same time,the discussion on the correlation between the seismic sources,site parameters,and seismic response of the bridges is unexplored. In this paper,the stochastic finite fault method and the boundary element method are combined to generate the multi-dimensional and multi-point ground motions of the overlying water-layer canyon sites near faults,and the analysis of the seismic response of the deep-water,large-span,high-pier rigid frame bridge in the near-fault canyon site is developed. The sensitivity of the response of piers and bearings to the seismic source and site parameters is investigated from the perspective of the whole physical process between the seismic source and the structure. The results indicate that the bridge response is most sensitive to the rupture surface size. On the whole,the influence of source parameters on the bridge response is more significant than that of site parameters. The site effect leads to the difference of the mean values of curvature ductility ratios of two main piers in longitudinal and transverse directions to be 85% and 88%. There are differences in the sensitivities of the main piers and bearings to each parameter. When the dip angle of the fault is between 33°~60°,the seismic response of the bridge shows a trend of increasing first and then decreasing,and the curvature ductility ratio of the main pier can differ by 35%. The water layer has an inhibitory effect on ground motions; however,the amplification effect of hydrodynamic pressures on the seismic response of the bridge is more prominent.

near-fault ground motions  /  local site effect  /  deep-water rigid frame bridge  /  sensitivity
Sibo MENG, Shitao WEI, Zhongxian LIU, Xi CHENG, Wenxuan LI. Parametric sensitivity study of seismic response for deep-water rigid frame bridge in near-fault canyon sites[J]. Journal of Vibration Engineering, 2025 , 38 (8) : 1922 -1934 . DOI: 10.16385/j.cnki.issn.1004-4523.202309066
Year 2025 volume 38 Issue 8
PDF
97
47
Cite this Article
BibTeX
Article Info
doi: 10.16385/j.cnki.issn.1004-4523.202309066
  • Receive Date:2023-09-23
  • Online Date:2026-02-09
  • Published:2025-08-10
Article Data
Affiliations
History
  • Received:2023-09-23
  • Revised:2023-11-23
Funding
Affiliations
    1.Tianjin Key Laboratory of Structural Protection and Reinforcement for Civil Engineering and Architecture,Tianjin Chengjian University,Tianjin 300384,China
    2.School of Civil Engineering,Tianjin Chengjian University,Tianjin 300384,China
    3.China Railway 19th Bureau Group Guangzhou Engineering Co., Ltd., Guangzhou 511455,China
References
Share
https://castjournals.cast.org.cn/joweb/zdgcxb/EN/10.16385/j.cnki.issn.1004-4523.202309066
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT