Chinese Traditional and Herbal Drugs
|
2025, 56(3): 808-818
Research on improvement of comprehensive properties and evaluation of Scutellariae Radix and Coptidis Rhizoma extract powder based on surface modification technology
Full
ZHENG Tao1, YANG Suwan2, WANG Xichen2, ZHANG Yu2, CHEN Jing2, LYU Zhiyang2,3
Affiliations
1 Taizhou Polytechnic College, Taizhou 225300, China;
2 Nanjing University of Chinese Medicine Hanlin College, Taizhou 225300, China;
3 Jiangsu Food &
doi: 10.7501/j.issn.0253-2670.2025.03.008
Outline
Objective Surface modification technology was used to optimize the comprehensive properties of Scutellariae Radix (SR) and Coptidis Rhizoma (CR) extract powders. The study aimed to select the best modifier and process, providing a foundation for the development of subsequent formulations. Methods SR and CR extract powders and crude extracts were prepared. Three modifiers , silicon dioxide (S), micronized silica gel (M) and hydroxypropyl methylcellulose (H), were selected, and the modified technology of surface cladding (SC) and microencapsulation coating (MC) was used to prepare modified extract powder. Powders were measured secondary indexes, including H, HR, α, Da, Dc, IH, IC, Ie, D50, span, width and SSA. All secondary indexes were normalized and a physical fingerprint diagram was drawn and similarity analysis was conducted. The secondary indexes were converted into five primary indexes of uniformity, accumulability, flowability,compressibility and stability, and the weight coefficients were obtained by using the entropy weighted coefficient of variation method. The comprehensive performance scores of the extract powders were calculated. PCA was used to evaluate the contribution rate of each secondary index to the comprehensive performance of the extract powders, and PLS was used to analyze the correlation between each secondary index and the comprehensive performance of the extract powders, focusing on the D50 that the greatest impact on the homogeneity of the extract powders. Results Using SC and MC modification techniques, SR, CR, and six modified extract powders were prepared. The secondary indexes of each extract powder were normalized, and physical fingerprint profiles were created. The similarity analysis results were as follows: The similarity between SR and SC modified groups SR-SC-S, SR-SC-M, and SR-SC-H was 0.977, 0.971, and 0.978, respectively. The similarity between SR and MC modified groups SR-MC-S, SR-MC-M, and SR-MC-H was 0.717, 0.739, and 0.693, respectively. The similarity between CR and SC modified groups CR-SC-S, CR-SC-M, and CR-SC-H was 0.904, 0.902, and 0.955, respectively. The similarity between CR and MC modified groups CR-MC-S, CR-MC-M, and CR-MC-H was 0.729, 0.737, and 0.716, respectively. Significant differences were observed between the MC modified SR and CR powders compared to the unmodified extract powders, with hydroxypropyl methylcellulose showing the most significant difference. The SC modification showed no significant effect. The entropy weight coefficient of variation method yielded the following coupling weight coefficients wjSR: stability (0.121 0), uniformity (0.484 0), flowability (0.186 7), accumulability (0.099 0), and compressibility (0.109 3); wjCR: stability (0.013 4), uniformity (0.394 1), flowability (0.173 1), accumulability (0.288 5), and compressibility (0.130 9). The results of comprehensive performance scores of the extract powders showed the comprehensive performance score of SR extract powder was 49.13. The MC modified SR-MC-H, SR-MC-M, and SR-MC-S had comprehensive performance scores of 62.90, 61.78, and 61.64, respectively, showing significant differences compared to the unmodified powder. The SR-MC-H comprehensive performance score improved by 28.0% over the unmodified extract powder, indicating the best modification effect, while the effect of SC modification was slightly worse. The comprehensive performance score of CR extract powder was 50.21. The MC modified powders had comprehensive performance scores above 61.00, showing significant differences compared to the unmodified powder. The CR-MC-H had a comprehensive performance score of 61.68, an improvement of 22.8% over the unmodified group, indicating the best effect. The SC modification with silicon dioxide and micronized silica gel resulted in comprehensive performance scores of 56.35 and 56.25, respectively, also showing significant differences. PCA analysis indicated that five secondary indexes α, SSA, HR, width, and span had a large contribution to the overall performance of SR and CR extract powders. PLS analysis of D50 revealed that width, span, H, and Dc had significant effects on the D50 of the extract powders. Conclusion Surface modification technology can improve the comprehensive properties of SR and CR extract powders. The MC modification technology showed the best results, with hydroxypropyl methylcellulose achieving the highest comprehensive performance score as a modifier.
Scutellariae Radix
/
Coptidis Rhizoma
/
extract powder
/
physical fingerprint spectrum
/
surface cladding
/
microencapsulation coating
/
modification technology
/
entropy weight coefficient of variation method
/
hydroxypropyl methylcellulose
郑涛, 杨苏皖, 王希晨, 张玉, 陈静, 吕志阳.
基于表面改性技术改善黄芩、黄连浸膏粉综合性能及其评价研究.
中草药,
2025
, 56
(3)
: 808
-818
.
DOI: 10.7501/j.issn.0253-2670.2025.03.008
ZHENG Tao, YANG Suwan, WANG Xichen, ZHANG Yu, CHEN Jing, LYU Zhiyang.
Research on improvement of comprehensive properties and evaluation of Scutellariae Radix and Coptidis Rhizoma extract powder based on surface modification technology[J].
Chinese Traditional and Herbal Drugs,
2025
, 56
(3)
: 808
-818
.
DOI: 10.7501/j.issn.0253-2670.2025.03.008
Year 2025 volume 56 Issue 3
45
7
Cite this Article
BibTeX
Article Info
doi: 10.7501/j.issn.0253-2670.2025.03.008
- Receive Date:2024-09-09
- Online Date:2026-11-13