收藏切换
Optimization of processing technique of stir-fried Paeoniae Radix Alba using Box-Benhnken design-response surface method combination with artificial neural network
收藏切换
Chinese Traditional and Herbal Drugs | 2025, 56(21) : 7762 - 7771
Less
收藏切换
Chinese Traditional and Herbal Drugs | 2025, 56(21): 7762-7771
Optimization of processing technique of stir-fried Paeoniae Radix Alba using Box-Benhnken design-response surface method combination with artificial neural network
Full
AN He1,2, PENG Hongyan1,2, LI Peisen1,2, LI Hengyang1,2, GUO Bing1,2, GUO Long1,2, YOU Guangjiao1,2, ZHANG Dan1,2
Affiliations
    1 Hebei Provincial Innovation Center for Traditional Chinese Medicine Processing Technology, College of Pharmacy, Hebei University of Chinese Medicine, Shijiazhuang 050200, China;
    2 Inheritance Base for Traditional Chinese Medicine Processing Techniques of National Administration of Traditional Chinese Medicine (Hebei Province), Shijiazhuang 050200, China
doi: 10.7501/j.issn.0253-2670.2025.21.010
Outline
收藏切换
Objective To optimize the stir-frying process for Baishao (Paeoniae Radix Alba, PRA) and determine the optimal process parameters, thereby providing a scientific basis for the standardized production of its processed decoction pieces. Methods HPLC was employed to determine the contents of gallic acid, catechin, albiflorin, paeoniflorin, 1,2,3,4,6-pentagalloylglucose (PGG), and benzoylpaeoniflorin in stir-fried PRA. A normalized comprehensive evaluation value (OD value), derived from the contents of these six components and water-soluble extractives, was established as the overall evaluation index. Based on preliminary single-factor investigations of administration dosage, stir-frying temperature, and stir-frying time, the optimization experiment was conducted using the CRITIC weighting method in combination with Box-Behnken design-response surface methodology (BBD-RSM). Subsequently, an artificial neural network was constructed using the deep learning toolbox in MATLAB R2020b to validate the optimal parameters obtained from the BBD-RSM and to analyze the relationships between the dosage of administration, stir-frying temperature, stir-frying time and OD value. Results The optimal processing parameters obtained from the BBD-RSM combined with artificial neural network optimization experiment were determined to be a administration dosage of 46 g/L, a stir-frying temperature of 143 ℃, and a stir-frying time of 8.4 min. The predicted comprehensive score under these conditions was 0.612 2. Triplicate verification experiments conducted at these optimal parameters yielded average mass fractions of gallic acid, catechin, albiflorin, paeoniflorin, PGG, and benzoylpaeoniflorin of 1.78, 0.56, 6.70, 26.95, 4.02, and 0.51 mg/g, respectively, with an average content of water-soluble extractives of 31.62%. The comprehensive OD scores were 0.640 9, 0.628 4, and 0.596 2, giving an average value of 0.621 8 and a relative standard deviation (RSD) of 3.71% (< 5%), which was close to the predicted value. These results demonstrate that the established stir-frying process of PRA is stable and feasible. Conclusion The optimized stir-frying process for PRA is stable and feasible. This study provides a valuable reference for the quality control of stir-fried PRA.
stir-fried Paeoniae Radix Alba  /  process optimization  /  CRITIC method  /  composite normalized value  /  Box-Benhnken design-response surface methodology  /  artificial neural network  /  gallic acid  /  catechin  /  albiflorin  /  paeoniflorin  /  1,2,3,4,6-pentagalloylglucose  /  benzoylpaeoniflorin
安和, 彭红妍, 李沛森, 李恒阳, 郭兵, 郭龙, 游广娇, 张丹. Box-Benhnken设计-响应面法结合人工神经网络优化炒白芍的炮制工艺. 中草药, 2025 , 56 (21) : 7762 -7771 . DOI: 10.7501/j.issn.0253-2670.2025.21.010
AN He, PENG Hongyan, LI Peisen, LI Hengyang, GUO Bing, GUO Long, YOU Guangjiao, ZHANG Dan. Optimization of processing technique of stir-fried Paeoniae Radix Alba using Box-Benhnken design-response surface method combination with artificial neural network[J]. Chinese Traditional and Herbal Drugs, 2025 , 56 (21) : 7762 -7771 . DOI: 10.7501/j.issn.0253-2670.2025.21.010
Year 2025 volume 56 Issue 21
73
24
Cite this Article
BibTeX
Article Info
doi: 10.7501/j.issn.0253-2670.2025.21.010
  • Receive Date:2025-07-04
  • Online Date:2026-11-13
Article Data
Affiliations
History
  • Received:2025-07-04
Affiliations
References
Share
https://castjournals.cast.org.cn/joweb/zcy/EN/10.7501/j.issn.0253-2670.2025.21.010
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT