收藏切换
Improvement and evaluation of comprehensive properties of Gegen Qinlian Compound extract powder based on surface modification technology
收藏切换
Chinese Traditional and Herbal Drugs | 2025, 56(13) : 4634 - 4642
Less
收藏切换
Chinese Traditional and Herbal Drugs | 2025, 56(13): 4634-4642
Improvement and evaluation of comprehensive properties of Gegen Qinlian Compound extract powder based on surface modification technology
Full
LYU Zhiyang1, ZHANG Yu2, YANG Suwan2, WANG Xichen2, CHEN Jing2, YANG Yuwei1
Affiliations
    1 School of Pharmacy, Jiangsu Food & 2 harmaceutical Science College, Huai'an 223003, China
About Author:
江苏省“青蓝工程”优秀教学团队资助项目 (2024); 江苏省“青蓝工程”优秀青年骨干教师资助项目 (2022); 泰州市科技支撑计划(社会发展)项目 (TS202425); 泰州市科技支撑计划(社会发展)项目 (SSF20230030); 江苏省大学生创新创业训练计划项目 (202413981004Y)
doi: 10.7501/j.issn.0253-2670.2025.13.008
Outline
收藏切换
Objective To optimize the comprehensive properties of Gegen Qinlian Compound (GQC, 葛根芩连方) extract powder using surface modification technology, screen the best modifier and process, and provide guidance for formulation development. Methods The ball mill (BM) and spray drying (SD) coating modification techniques were used, and three modifiers, silicon dioxide (SiO2), ethyl cellulose (EC) and magnesium stearate (ST), were selected. The GQC modified extract powders were prepared and designated GQC/BM-SiO2, GQC/BM-EC, GQC/BM-ST and GQC/SD-SiO2, GQC/SD-EC, GQC/SD-ST. All powders were measured secondary indicators, including H, HR, α, Da, Dc, IH, IC, Ie, D50, span, width and SSA, draw physical fingerprints, and conduct similarity analysis. Convert the secondary indicators into 5 primary indicators, determine the weights using the entropy weight coefficient of variation method, calculate the comprehensive performance score, screen for the optimal solution, and observe the changes in particle surface morphology and structure using scanning electron microscopy (SEM). Principal component analysis (PCA) evaluates the contribution rate of secondary indicators, while partial least squares analysis (PLSA) analyzes the correlation between key indicators H and SSA. Results GQC and six groups of modified powders (GQC/BM-SiO2, GQC/BM-EC, GQC/BM-ST and GQC/SD-SiO2, GQC/SD-EC, GQC/SD-ST) were obtained, and physical fingerprints were drawn and similarity was calculated. The similarity between GQC extract powder and GQC/BM-SiO2, GQC/BM-ST, GQC/BM-EC were 0.953, 0.920, and 0.969 respectively, indicating negligible modification, GQC extract powder compared with GQC/SD-SiO2, GQC/SD-ST, QC/SD-EC the similarity were 0.477, 0.449, and 0.439, respectively, indicating significant modification effect. The weight coefficients of the first level indicators are: liquidity 0.104 8, accumulation 0.134 1, compressibility 0.111 0, stability 0.133 1, and uniformity 0.517 0. The comprehensive score of magnesium stearate modifier in the BM group was the highest at 50.54, an increase of 18.92%. The mean value was 62.65 an increase of 47.41%, After SD modification, the best modification effect of GQC/SD-ST was 63.21. SEM shows that ST uniformly coats the surface of the extract powder, with smooth particle surfaces, uniform sizes, and high roundness. PCA analysis shows that IH, D50, span, width, and SSA contribute significantly. PLSA analysis showed a significant correlation between H and α, IC, width, IH, D50, span, SSA, which were related to powder density, SSA is significantly associated with D50, width, and span, with particle size and span having the greatest impact. Conclusion Surface modification technology can improve the comprehensive performance of GQC extract powder. SD modification has a better effect, and ST modifier has the highest score, providing reference for formulation development.
tradition Chinese medicine extract powder  /  Gegen Qinlian Compound  /  surface modification technology  /  physical fingerprint  /  entropy weight coefficient of variation method  /  partial least squares analysis  /  principal component analysis  /  silicon dioxide  /  ethyl cellulose  /  magnesium stearate  /  spray drying
吕志阳, 张玉, 杨苏皖, 王希晨, 陈静, 杨雨微. 基于表面改性技术改善葛根芩连方浸膏粉综合性能及其评价. 中草药, 2025 , 56 (13) : 4634 -4642 . DOI: 10.7501/j.issn.0253-2670.2025.13.008
LYU Zhiyang, ZHANG Yu, YANG Suwan, WANG Xichen, CHEN Jing, YANG Yuwei. Improvement and evaluation of comprehensive properties of Gegen Qinlian Compound extract powder based on surface modification technology[J]. Chinese Traditional and Herbal Drugs, 2025 , 56 (13) : 4634 -4642 . DOI: 10.7501/j.issn.0253-2670.2025.13.008
Year 2025 volume 56 Issue 13
43
0
Cite this Article
BibTeX
Article Info
doi: 10.7501/j.issn.0253-2670.2025.13.008
  • Receive Date:2024-12-19
  • Online Date:2026-11-12
Article Data
Affiliations
History
  • Received:2024-12-19
Affiliations
References
Share
https://castjournals.cast.org.cn/joweb/zcy/EN/10.7501/j.issn.0253-2670.2025.13.008
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT