收藏切换
Research on data transmission design for ultrasonic monitoring based on inductive coupling
收藏切换
Tian JI1, Jingwei CHENG1, Zhe WANG1, Yao YU1, Tao CAI1, Kaichao LU2, Shuhao MA1
Pressure Vessel Technology | 2026, 43(3) : 78 - 86
Less
收藏切换
Pressure Vessel Technology | 2026, 43(3): 78-86
• Inspection & Maintenance •
Research on data transmission design for ultrasonic monitoring based on inductive coupling
Full
Tian JI1, Jingwei CHENG1, Zhe WANG1, Yao YU1, Tao CAI1, Kaichao LU2, Shuhao MA1
Affiliations
  • 1Hefei General Machinery Research Institute Co.,Ltd.,Hefei 230031,China
  • 2College of Mechanical Engineering,Zhejiang University of Technology,Hangzhou 310023,China
Published: 2026-03-30 doi: 10.3969/j.issn.1001-4837.2026.03.008
Outline
收藏切换

To address the difficulty in accurately obtaining electrical parameters of key components for the inductive coupling wireless ultrasonic monitoring systems,the accuracy of existing coil inductance calculation methods and piezoelectric transducer impedance modeling techniques were compared.Taking planar spiral coils as the research objects,the filament method,area integral method,and finite element simulation were used to calculate self‑inductance and mutual inductance,with results compared against experimental values.A finite element model of the piezoelectric transducer and workpiece coupling system was established to obtain the impedance spectrum,which was compared with experimental values.The component parameters were incorporated into a three‑coil coupling circuit model to construct an monitoring system and conduct thickness inspection verification.The results indicate that the filament method is suitable for self‑inductance calculation,with a self‑inductance calculation error of less than 3%.The area integral method is appropriate for mutual inductance calculation,with a mutual inductance calculation error of less than 5% within a lift‑off distance range of 2 to 10 mm.The finite element simulation accurately predicts the resonant frequency of the piezoelectric transducer.The constructed monitoring system successfully achieveds thickness detection.This study provides methodological references and experimental basis for component selection and parameter design in inductive coupling wireless ultrasonic inspection systems.

inductive coupling  /  wireless ultrasonic inspection  /  impedance spectrum  /  inductance calculation
吉田, 程经纬, 王哲, 虞耀, 蔡涛, 鲁凯超, 马书豪. 基于电感耦合的超声监测数据传输设计研究. 压力容器, 2026 , 43 (3) : 78 -86 . DOI: 10.3969/j.issn.1001-4837.2026.03.008
Tian JI, Jingwei CHENG, Zhe WANG, Yao YU, Tao CAI, Kaichao LU, Shuhao MA. Research on data transmission design for ultrasonic monitoring based on inductive coupling[J]. Pressure Vessel Technology, 2026 , 43 (3) : 78 -86 . DOI: 10.3969/j.issn.1001-4837.2026.03.008
Year 2026 volume 43 Issue 3
104
39
Cite this Article
BibTeX
Article Info
doi: 10.3969/j.issn.1001-4837.2026.03.008
  • Receive Date:2026-01-05
  • Online Date:2026-10-23
  • Published:2026-03-30
Article Data
Affiliations
History
  • Received:2026-01-05
  • Revised:2026-03-03
Affiliations
    1Hefei General Machinery Research Institute Co.,Ltd.,Hefei 230031,China
    2College of Mechanical Engineering,Zhejiang University of Technology,Hangzhou 310023,China
References
Share
https://castjournals.cast.org.cn/joweb/ylrq/EN/10.3969/j.issn.1001-4837.2026.03.008
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT