收藏切换
Optimization Design of Pumping and Injection Units in an In-situ Leaching Mining
收藏切换
Xiaoheng DUAN, Yongqiang SUN
Uranium Mining and Metallurgy | 2023, 42(1) : 10 - 14
Less
收藏切换
Uranium Mining and Metallurgy | 2023, 42(1): 10-14
• MINING AND HYDROMETALLURGY •
Optimization Design of Pumping and Injection Units in an In-situ Leaching Mining
Full
Xiaoheng DUAN, Yongqiang SUN
Affiliations
  • The Fourth Research and Design Engineering Corporation, CNNC, Shijiazhuang 050021, China
Published: 2023-02-20 doi: 10.13426/j.cnki.yky.2022.05.25
Outline
收藏切换

The pumping and injection units in the well site of in-situ leaching production may have the situation that the injection volume is greater than the pumping volume, resulting in the diffusion of part of the leachate pollution beyond the leaching range. Through the target optimization method of the mining area, the single hole pumping and injection volume of the well site is optimized, and the pumping and injection volume of each pumping and injection unit in the mining area is effectively controlled to keep the total pumping volume greater than the total injection volume by 0.5%, so that the leaching solution is controlled within the well site as far as possible. According to the optimization results, the pumping and injection volume of each unit can be changed to realize the production and decommissioning of the mining area at the same time.

in-situ leaching  /  optimization design  /  design of well site  /  pumping and injection balance
段晓恒, 孙永强. 地浸开采井场抽注单元优化设计研究. 铀矿冶, 2023 , 42 (1) : 10 -14 . DOI: 10.13426/j.cnki.yky.2022.05.25
Xiaoheng DUAN, Yongqiang SUN. Optimization Design of Pumping and Injection Units in an In-situ Leaching Mining[J]. Uranium Mining and Metallurgy, 2023 , 42 (1) : 10 -14 . DOI: 10.13426/j.cnki.yky.2022.05.25
Year 2023 volume 42 Issue 1
55
13
Cite this Article
BibTeX
Article Info
doi: 10.13426/j.cnki.yky.2022.05.25
  • Receive Date:2022-05-23
  • Online Date:2026-10-23
  • Published:2023-02-20
Article Data
Affiliations
History
  • Received:2022-05-23
Affiliations
    The Fourth Research and Design Engineering Corporation, CNNC, Shijiazhuang 050021, China
References
Share
https://castjournals.cast.org.cn/joweb/yky/EN/10.13426/j.cnki.yky.2022.05.25
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT