收藏切换
Key Parameters for Casing Slotted Well in In-situ Leaching of Uranium
收藏切换
Xilong LI, Jifan YAN, Xiaokui LIU, Wenjie KOU
Uranium Mining and Metallurgy | 2026, 45(3) : 29 - 34
Less
收藏切换
Uranium Mining and Metallurgy | 2026, 45(3): 29-34
• Mining and Hydrometallurgy •
Key Parameters for Casing Slotted Well in In-situ Leaching of Uranium
Full
Xilong LI, Jifan YAN, Xiaokui LIU, Wenjie KOU
Affiliations
  • Tongliao Uranium Co., Ltd., CNNC, Tongliao 028000, China
Published: 2026-08-20 doi: 10.13426/j.cnki.yky.2025.11.08
Outline
收藏切换

In order to solve the problems of cumbersome construction process, irreplaceable filter and non-convertible function of extractable liquid in complex sandstone type uranium deposits in the traditional in-situ leaching uranium well configuration (such as large-diameter gravel filling well configuration), a new type of slotted well configuration and its construction technology were proposed. The configuration adopts a one-diameter to the end method, the casing is lowered through the whole hole and the reverse grouting is cemented, and then the industrial ore section is slapped by high-pressure hydraulic sandblasting technology to open up the hydraulic connection channel inside and outside the casing. Through laboratory tests, the key technical parameters of hydraulic sandblasting joints were studied, including the effects of spray pressure, nozzle diameter and moving speed on the depth and width of the joints. The results indicate the optimal slotted performance is achieved when the injection pressure is maintained 30 MPa, the nozzle diameter is set at 3.5 mm, and the moving speed is controlled at 90 mm/min. The slotted well configuration has the advantages of simple construction process, high efficiency, less consumables and high well quality, and is suitable for the mining of complex sandstone type uranium deposits to improve the recovery rate of uranium resources.

in-situ leaching of uranium  /  well configuration  /  slotted  /  slotted well  /  high-pressure hydraulic sandblasting  /  construction parameters  /  construction technology
李喜龙, 闫纪帆, 刘晓奎, 口文杰. 地浸采铀割缝式钻孔施工关键技术参数优化. 铀矿冶, 2026 , 45 (3) : 29 -34 . DOI: 10.13426/j.cnki.yky.2025.11.08
Xilong LI, Jifan YAN, Xiaokui LIU, Wenjie KOU. Key Parameters for Casing Slotted Well in In-situ Leaching of Uranium[J]. Uranium Mining and Metallurgy, 2026 , 45 (3) : 29 -34 . DOI: 10.13426/j.cnki.yky.2025.11.08
Year 2026 volume 45 Issue 3
163
26
Cite this Article
BibTeX
Article Info
doi: 10.13426/j.cnki.yky.2025.11.08
  • Receive Date:2025-11-21
  • Online Date:2026-09-28
  • Published:2026-08-20
Article Data
Affiliations
History
  • Received:2025-11-21
  • Revised:2026-01-04
Affiliations
    Tongliao Uranium Co., Ltd., CNNC, Tongliao 028000, China
References
Share
https://castjournals.cast.org.cn/joweb/yky/EN/10.13426/j.cnki.yky.2025.11.08
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT