Full
Outline
To improve the extraction efficiency of uranyl ions in a moving bed adsorption tower and reduce the loss of saturated resin, a geometric model incorporating key internal components was established using a coupled CFD-DEM approach, with model reliability validated against experimental data. Systematic simulations of particle settling under varying inlet flow rates were conducted, focusing on the kinetic behavior at the optimal flow rate. Based on these findings, structural optimizations were implemented, and the particle flow and collision characteristics before and after optimization were compared. The simulation results indicate that the particle settling process can be divided into three distinct stages: initial uniform settling, accelerated directional transport, and energy dissipation deposition. Local vortices induced by the liquid distribution device predominantly govern particle spatial distribution, leading to accumulation in the bottom region of the tower. At the optimal flow rate, over 90% of particles reside in the low-velocity range, indicating significant collective stability within the system. Particle contact statistics reveal that wear risk primarily stems from particle-particle collisions rather than particle-structure interactions. Comparative analysis of different flow rates demonstrates that velocity markedly influences particle collision frequency and energy by altering the flow field kinetic energy. While the optimized design improves particle distribution uniformity, it also results in a slight increase in collision energy, highlighting a trade-off between flow homogenization and collision dynamics. This study elucidates the microscopic mechanisms of particle transport and wear in moving bed adsorption towers, providing a theoretical basis for the optimization of devices and the regulation of operational parameters.
109
20
| 科 Family | 属数 Number of genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) | 属 Genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) |
|---|---|---|---|---|---|---|
| 鹅膏菌科Amanitaceae | 2 | 11 | 5.26 | 鹅膏菌属 Amanita | 10 | 4.78 |
| 小菇科 Mycenaceae | 2 | 12 | 5.74 | 丝盖伞属 Inocybe | 5 | 2.39 |
| 多孔菌科 Polyporaceae | 8 | 14 | 6.70 | 蜡蘑属 Laccaria | 5 | 2.39 |
| 红菇科 Russulaceae | 3 | 23 | 11.00 | 小皮伞属 Marasmius | 6 | 2.87 |
| 小菇属 Mycena | 11 | 5.26 | ||||
| 光柄菇属 Pluteus | 5 | 2.39 | ||||
| 红菇属 Russula | 17 | 8.13 | ||||
| 栓菌属 Trametes | 5 | 2.39 |
关闭全屏
No. 86 Xueyuan South Road, Haidian District, Beijing
010-62662699(Operation and Technical Support)
qkjq@cast.org.cn
Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House
