收藏切换
Study on Microstructure and Properties of High Strength Beam Steel 800L
收藏切换
Hai-rui Bai1, Zhi-guang Liu2, Xiu-fei Zhang3, Li Huang1
Rare Earth Steel | 2021, 47(2) : 49 - 51
Less
收藏切换
Rare Earth Steel | 2021, 47(2): 49-51
• Quality of Variety and Experiment and Research •
Study on Microstructure and Properties of High Strength Beam Steel 800L
Full
Hai-rui Bai1, Zhi-guang Liu2, Xiu-fei Zhang3, Li Huang1
Affiliations
  • 1.Technical Center of Inner Mongolia Baotou Steel Union Co., Ltd., Baotou 014010, Inner Mongolia Autonomous Region, China
  • 2.Discipline Inspection Commission of Baotou Iron & Steel (Group) Co., Ltd., Baotou 014010, Inner Mongolia Autonomous Region, China
  • 3.Inner Mongolia Baotou Steel Metal Manufacturing Co., Ltd., Baotou 014010, Inner Mongolia Autonomous Region, China
Published: 2021-04-25 doi: 10.13647/j.cnki.btgkj.2021.02.013
Outline
收藏切换

The development of beam steel 800L with the composition design of low carbon, microalloying of niobium, vanadium and titanium as well as controlled rolling and cooling process is carried out in the lab. Moreover, the chemical composition, heating and holding temperatures, rolling and cooling technologies are studied as well as the mechanical properties are tested and microstructure is analyzed. The results showed that the trial-produced 800L steel was with two-stage rolling after held at 1 250 ℃ and finishing temperature was set at 860 ℃, laminar cooling was carried out after rolling and finish cooling temperature was 600 ℃ so that the beam steel 800L with good mechanical properties was obtained as well as its yield strength, tensile strength and percentage elongation after fracture were 753 MPa, 845 MPa and 18.5% respectively as well as the 180° bending test was qualified.

high strength  /  beam steel  /  microstructure  /  mechanical properties
白海瑞, 刘智光, 张秀飞, 黄利. 高强度汽车大梁钢800L组织和性能研究. 包钢科技, 2021 , 47 (2) : 49 -51 . DOI: 10.13647/j.cnki.btgkj.2021.02.013
Hai-rui Bai, Zhi-guang Liu, Xiu-fei Zhang, Li Huang. Study on Microstructure and Properties of High Strength Beam Steel 800L[J]. Science & Technology of Baotou Steel, 2021 , 47 (2) : 49 -51 . DOI: 10.13647/j.cnki.btgkj.2021.02.013
Year 2021 volume 47 Issue 2
47
6
Cite this Article
BibTeX
Article Info
doi: 10.13647/j.cnki.btgkj.2021.02.013
  • Receive Date:2020-10-19
  • Online Date:2026-10-20
  • Published:2021-04-25
Article Data
Affiliations
History
  • Received:2020-10-19
Affiliations
    1.Technical Center of Inner Mongolia Baotou Steel Union Co., Ltd., Baotou 014010, Inner Mongolia Autonomous Region, China
    2.Discipline Inspection Commission of Baotou Iron & Steel (Group) Co., Ltd., Baotou 014010, Inner Mongolia Autonomous Region, China
    3.Inner Mongolia Baotou Steel Metal Manufacturing Co., Ltd., Baotou 014010, Inner Mongolia Autonomous Region, China
References
Share
https://castjournals.cast.org.cn/joweb/xtg/EN/10.13647/j.cnki.btgkj.2021.02.013
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT