Such key control points of rolling as the chemical composition, heating process, finishing temperature, laying temperature, cooling and controlled cooling of hot rolled coiled reinforced bar with small specification are optimized as well as the mechanical properties, macroscopic metallographic structure and microstructure of reinforced bar before and after optimization are compared and analyzed. The results showed that the proportion of optimized Φ8 mm and Φ10 mm coiled reinforced bar with yield strength below 415 MPa significantly reduced, there were no obvious different contrasts for macroscopic metallographic structure as well as such abnormal microstructures as the tempered martensite and widmannstatten structure.
| 科 Family | 属数 Number of genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) | 属 Genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) |
|---|---|---|---|---|---|---|
| 鹅膏菌科Amanitaceae | 2 | 11 | 5.26 | 鹅膏菌属 Amanita | 10 | 4.78 |
| 小菇科 Mycenaceae | 2 | 12 | 5.74 | 丝盖伞属 Inocybe | 5 | 2.39 |
| 多孔菌科 Polyporaceae | 8 | 14 | 6.70 | 蜡蘑属 Laccaria | 5 | 2.39 |
| 红菇科 Russulaceae | 3 | 23 | 11.00 | 小皮伞属 Marasmius | 6 | 2.87 |
| 小菇属 Mycena | 11 | 5.26 | ||||
| 光柄菇属 Pluteus | 5 | 2.39 | ||||
| 红菇属 Russula | 17 | 8.13 | ||||
| 栓菌属 Trametes | 5 | 2.39 |