Home Journals Articles Updates About
CN
image
收藏切换
Fault Diagnosis for Gearbox Based on Kurtosis of Fast Spectrum and 1.5 Dimension Spectrum
收藏切换
Yu-liang Zhu1, 2, Li-kun Guan1
Rare Earth Steel | 2020, 46(1) : 67 - 69
Less
收藏切换
Rare Earth Steel | 2020, 46(1): 67-69
• Equipment and Automation •
Fault Diagnosis for Gearbox Based on Kurtosis of Fast Spectrum and 1.5 Dimension Spectrum
Full
Yu-liang Zhu1, 2, Li-kun Guan1
Affiliations
  • 1.School of Mechanical Engineering, Inner Mongolia University of Science and Technology, Baotou 014010, Inner Mongolia Autonomous Region, China
  • 2.Electric Co., Ltd. of Baotou Iron & Steel (Group) Co., Ltd., Baotou 014010, Inner Mongolia Autonomous Region, China
Published: 2020-02-25 doi: 10.13647/j.cnki.btgkj.2020.01.019
Outline
收藏切换

In the paper, a new fault diagnosis method for gearbox combining with the kurtosis of fast spectrum and 1.5 dimension spectrum is proposed aiming at the problem that the initial failure of gearbox is difficult to be recognized. Firstly, the maximum frequency band of kurtosis for original signal is filtrated with kurtosis of fast spectrum, and then the filtrated frequency band is analyzed with 1.5 dimension spectrum. Finally, the positions of faults for gearbox are determined by analyzing prominent components in the spectrogram so as to take precautions in advance. The method is with the analysis validation by project cases, it is fully proved that the fault information could be effectively extracted with this method, which plays a certain guiding role in engineering applications.

gearbox  /  kurtosis of fast spectrum  /  1.5 dimension spectrum  /  fault analysis and diagnosis
朱雨亮, 关丽坤. 基于快速谱峭度和1.5维谱的齿轮箱故障诊断. 包钢科技, 2020 , 46 (1) : 67 -69 . DOI: 10.13647/j.cnki.btgkj.2020.01.019
Yu-liang Zhu, Li-kun Guan. Fault Diagnosis for Gearbox Based on Kurtosis of Fast Spectrum and 1.5 Dimension Spectrum[J]. Science & Technology of Baotou Steel, 2020 , 46 (1) : 67 -69 . DOI: 10.13647/j.cnki.btgkj.2020.01.019
Appendix
Less
Year 2020 volume 46 Issue 1
50
7
Cite this Article
BibTeX
Article Info
doi: 10.13647/j.cnki.btgkj.2020.01.019
  • Receive Date：2019-04-22
  • Online Date：2026-10-20
  • Published：2020-02-25
Article Data
Affiliations
History
  • Received：2019-04-22
Affiliations
    1.School of Mechanical Engineering, Inner Mongolia University of Science and Technology, Baotou 014010, Inner Mongolia Autonomous Region, China
    2.Electric Co., Ltd. of Baotou Iron & Steel (Group) Co., Ltd., Baotou 014010, Inner Mongolia Autonomous Region, China
References
Share
https://castjournals.cast.org.cn/joweb/xtg/EN/10.13647/j.cnki.btgkj.2020.01.019
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family		 属数
Number of
genus		 种数
Number of
species		 占总种数比例
Percentage of
total species (%)		 属
Genus		 种数
Number of
species		 占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT
Links
Articles
Latest Articles
Most Read
Collections
Updates
Events
News
Multimedia
About
About Us
Contact
No. 86 Xueyuan South Road, Haidian District, Beijing
100081
010-62662699(Operation and Technical Support)
qkjq@cast.org.cn

Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House