收藏切换
Isolation, identification and biological characteristics of walnut anthracnose pathogen in Kang County, Gansu Province
收藏切换
Yibing TIAN, Chengde YANG, Yidan WANG, Ting MA
Journal of Northwest A&F University (Natural Science Edition) | 2026, 54(2) : 116 - 124
Less
收藏切换
Journal of Northwest A&F University (Natural Science Edition) | 2026, 54(2): 116-124
Isolation, identification and biological characteristics of walnut anthracnose pathogen in Kang County, Gansu Province
Full
Yibing TIAN, Chengde YANG, Yidan WANG, Ting MA
Affiliations
  • Laboratory of Gansu Province Crop Disease and Pest Biological Control Engineering, College of Plant Protection, Gansu Agricultural University, Lanzhou, Gansu 730070, China
Published: 2026-02-10 doi: 10.13207/j.jnwafu.2026.02.012
Outline
收藏切换
Objective

This research aims to elucidate the pathogenic species and biological characteristics of walnut anthracnose in Kang County, Gansu Province, to provide a theoretical basis for the integrated management of this disease in the region.

Method

From May to August in 2023, samples exhibiting typical symptoms were collected from walnut stems in the walnut planting region of Kang County, Gansu Province. Tissue separation method was used to isolate the samples, and their pathogenicity was subsequently determined and identified. The influence of various carbon sources, nitrogen sources, temperature, pH levels, and light conditions on mycelial growth and spore production was evaluated by the mycelial growth rate method.

Result

The pathogenicity test results confirmed that the isolate HT14 is the causative agent of walnut anthracnose in Kangxian County. The colony morphology of HT14 was round, initially white and fluffy, and after 4-5 days, the center of the colony turned gray with vigorous mycelial growth, forming raised areas that spread outward. The colony edges were white and sparse, with concentric rings on the back, whose grey color became lightened firstly and then darkened. Later, the colony front was gray and the back was gray-green. The single-celled conidia were cylindrical or oval shape, smooth, colorless, with its size being (14.43-8.29) μm× (4.71-2.61) μm. ITS, HIS3, ACT, TUB2, CHS1, and GAPDH gene sequence analysis showed that the HT14 isolate shared 99% homology with Colletotrichum fioriniae, which clustered into a single branch in the phylogenetic tree. Based on morphological characteristics, it was identified as C. fioriniae. The optimal carbon source and nitrogen source for the mycelial growth and sporulation of HT14 were determined to be lactose and sodium nitrate, respectively. The ideal conditions for mycelial growth were found to be a temperature of 25 ℃, continuous illumination of 24 h, and pH of 8.0. For sporulation, the optimal conditions were a temperature of 25 ℃, continuous illumination of 24 h, and pH of 5.0. The lethal temperature for HT14 was 52 ℃.

Conclusion

The optimal carbon source for mycelial growth and sporulation was determined to be lactose, while the optimal nitrogen source was sodium nitrate. For mycelial growth, the optimum conditions were found to be a temperature of 25 ℃, continuous illumination of 24 h, and pH of 8.0. For sporulation, the optimal conditions were a temperature of 25 ℃, continuous illumination of 24 h, and pH of 5.0.

Juglans regia  /  anthracnose  /  pathogen identification  /  Colletotrichum fioriniae  /  biological characteristics
田一冰, 杨成德, 王一丹, 马婷. 甘肃康县核桃炭疽病病原分离鉴定及其生物学特性. 西北农林科技大学学报(自然科学版), 2026 , 54 (2) : 116 -124 . DOI: 10.13207/j.jnwafu.2026.02.012
Yibing TIAN, Chengde YANG, Yidan WANG, Ting MA. Isolation, identification and biological characteristics of walnut anthracnose pathogen in Kang County, Gansu Province[J]. Journal of Northwest A&F University (Natural Science Edition), 2026 , 54 (2) : 116 -124 . DOI: 10.13207/j.jnwafu.2026.02.012
Year 2026 volume 54 Issue 2
37
11
Cite this Article
BibTeX
Article Info
doi: 10.13207/j.jnwafu.2026.02.012
  • Receive Date:2024-11-01
  • Online Date:2026-11-13
  • Published:2026-02-10
Article Data
Affiliations
History
  • Received:2024-11-01
  • Revised:2024-12-15
Funding
Affiliations
    Laboratory of Gansu Province Crop Disease and Pest Biological Control Engineering, College of Plant Protection, Gansu Agricultural University, Lanzhou, Gansu 730070, China
References
Share
https://castjournals.cast.org.cn/joweb/xnxbzk/EN/10.13207/j.jnwafu.2026.02.012
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT