收藏切换
Effects of different cutting period on the production performance of triticale in saline-alkali land in the Yellow River Delta
收藏切换
Run GAO, Guoliang WANG, Jinhong ZHANG, Bo WU
Journal of Northwest A&F University (Natural Science Edition) | 2026, 54(3) : 104 - 111
Less
收藏切换
Journal of Northwest A&F University (Natural Science Edition) | 2026, 54(3): 104-111
Effects of different cutting period on the production performance of triticale in saline-alkali land in the Yellow River Delta
Full
Run GAO, Guoliang WANG, Jinhong ZHANG, Bo WU
Affiliations
  • Institute of Leisure Agriculture/Key Laboratory of Urban Agriculture in East China, Ministry of Agriculture and Rural Affairs/Shandong Engineering Research Centre for Ecological Horticultural Plant Breeding, Shandong Academy of Agricultural Sciences, Jinan, Shandong 250100, China
Published: 2026-03-10 doi: 10.13207/j.jnwafu.2026.03.011
Outline
收藏切换
Objective

This research aims to screen high-yield and high-quality triticale varieties suitable for planting in saline-alkali land in the Yellow River Delta region, and to clarify the optimal cutting stage for harvesting, to provide a theoretical basis for the high yield and stable yield of triticale in saline-alkali land in the Yellow River Delta region.

Method

Five triticale varieties, namely Zhongsi 1048, Youneng, Purui, Maifeng, and Leishen, were selected for introduction experiments in saline-alkali land in the Yellow River Delta. Three cutting stages were set, including heading, flowering and grain-filling stages, to determine the agronomic traits, production performance, and nutritional quality of different varieties of triticale at various cutting stages. Principal component analysis was used for comprehensive evaluation of the five triticale.

Result

During all the cutting periods, the plant height of Zhongsi 1048 was the highest, followed by Maifeng, and Leishen ranked just below Maifeng during the flowering and grain-filling stages. The stem proportion of Zhongsi 1048 was higher than those of other varieties at all cutting stages, while the leaf proportion, ear proportion and leaf stem ratio were lower than those of other varieties. However, the stem proportion of Leishen and Maifeng were relatively low at all cutting stages, but the leaf proportion, ear proportion and leaf stem ratio were relatively high. During the heading stage, the hay yield of Zhongsi 1048 and Leishen were relatively high. During the flowering stage, the hay yield of Maifeng and Youneng were relatively high. During the grain-filling stage, the hay yield of Purui, Leishen and Maifeng were relatively high. The dry matter content of Zhongsi 1048 during the grain-filling stage was significantly higher than those of other varieties, and the neutral detergent fiber content of Leishen during the flowering stage was significantly higher than those of Zhongsi 1048, Youneng, and Purui, which, however, showed no significant difference compared to Maifeng. Principal component analysis showed that Zhongsi 1048 performed better during the heading stage, Zhongsi 1048, Maifeng, and Leishen performed better during the flowering stage, and Zhongsi 1048, Leishen, Maifeng and Purui performed better during the grain-filling stage.

Conclusion

Zhongsi 1048 showed better performance during the heading, flowering and grain-filling stages, and Leishen and Maifeng varieties showed better performance during the flowering and grain-filling stages, all of which are suitable for promotion of planting in saline-alkali of the Yellow River Delta region.

saline-alkali land  /  triticale  /  cutting period  /  production performance  /  nutritional quality
高润, 王国良, 张进红, 吴波. 不同刈割期对黄河三角洲盐碱地小黑麦生产性能的影响. 西北农林科技大学学报(自然科学版), 2026 , 54 (3) : 104 -111 . DOI: 10.13207/j.jnwafu.2026.03.011
Run GAO, Guoliang WANG, Jinhong ZHANG, Bo WU. Effects of different cutting period on the production performance of triticale in saline-alkali land in the Yellow River Delta[J]. Journal of Northwest A&F University (Natural Science Edition), 2026 , 54 (3) : 104 -111 . DOI: 10.13207/j.jnwafu.2026.03.011
Year 2026 volume 54 Issue 3
49
13
Cite this Article
BibTeX
Article Info
doi: 10.13207/j.jnwafu.2026.03.011
  • Receive Date:2024-12-03
  • Online Date:2026-11-13
  • Published:2026-03-10
Article Data
Affiliations
History
  • Received:2024-12-03
  • Revised:2025-01-09
Funding
Affiliations
    Institute of Leisure Agriculture/Key Laboratory of Urban Agriculture in East China, Ministry of Agriculture and Rural Affairs/Shandong Engineering Research Centre for Ecological Horticultural Plant Breeding, Shandong Academy of Agricultural Sciences, Jinan, Shandong 250100, China
References
Share
https://castjournals.cast.org.cn/joweb/xnxbzk/EN/10.13207/j.jnwafu.2026.03.011
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT