收藏切换
One-Dimensional Inversion of Source-Loop Transient Electromagnetics Based on Smoothed Inversion-Derived Prior Model
收藏切换
Jie LI1, Zhongxiao WU2, Dianchun ZHAO1, Yu MA1, Chao NIU3, *, Chao HUO2
Northwestern Geology | 2026, 59(4) : 190 - 200
Less
收藏切换
Northwestern Geology | 2026, 59(4): 190-200
One-Dimensional Inversion of Source-Loop Transient Electromagnetics Based on Smoothed Inversion-Derived Prior Model
Full
Jie LI1, Zhongxiao WU2, Dianchun ZHAO1, Yu MA1, Chao NIU3, *, Chao HUO2
Affiliations
  • 1Youfanghao Coal Mine, Hangjinqi Juneng Energy Co., Ltd., Ordos 017000, Inner Mongolia, China
  • 2Shaanxi Zhengtong Coal Industry Co., Ltd., Xianyang 713600, Shaanxi, China
  • 3College of Geology and Environment, Xi’an University of Science and Technology, Xi’an 710054, Shaanxi, China
Published: 2026-08-20 doi: 10.12401/j.nwg.2026035
Outline
收藏切换

To achieve refined inversion outcomes of TEM and enhance the precision of geological problem interpretation, conducting research on inversions under different initial models holds substantial significance. This study selected two distinct initial models: the homogeneous half-space model and the model derived from the inversion result of the least-squares method with a smoothing factor. Initially, the forward-response data of a three-layer geoelectric model (H-type and K-type) were utilized to conduct inversion computations via the least-squares method with a smoothing factor and the regularization-damped least squares method under different initial models. The inversion performances under various initial models were then compared and analyzed. Subsequently, field - measured data were employed to perform inversion calculations identical to those of the forward - fitting data. The normalized potential of the secondary field at a single point with different decay times, resistivity, the result model, and their corresponding errors were selected for comparative analysis. Additionally, the inversion effect of a complete apparent-resistivity profile was analyzed in conjunction with geological data. Finally, the research findings were validated through engineering cases. The results show that: The inversion of the least - squares method with a smoothing factor is poorly fitted with transient electromagnetic data. Under equivalent conditions, although the regularization-damped least squares method can more realistically reflect the stratal characteristics, its depiction of deep - stratum information is less accurate compared to when the initial model is the inversion - result model of the least - squares method with a smoothing factor. The inversion result of the regularization-damped least-squares method, with the inversion result of the least-squares method with a smoothing factor serving as the initial model, provides a more precise reflection of the underground geological conditions. The choice of different initial models exerts a remarkable influence on the inversion effect of TEM data. Through comparative analysis, it is further verified that the inversion of the regularization-damped least-squares method, with the inversion result of the least-squares method with a smoothing factor as the initial model, enjoys significant advantages in terms of accuracy and reliability. This conclusion offers crucial references and practical guidance for the application of the TEM in detecting complex geoelectric structure.

transient electromagnetics  /  initial model  /  smoothing factor least squares method  /  regularization-damped least square method  /  inversion
李杰, 吴中骁, 赵佃春, 马毓, 牛超, 霍超. 基于平滑反演先验约束的瞬变电磁定源回线一维反演研究. 西北地质, 2026 , 59 (4) : 190 -200 . DOI: 10.12401/j.nwg.2026035
Jie LI, Zhongxiao WU, Dianchun ZHAO, Yu MA, Chao NIU, Chao HUO. One-Dimensional Inversion of Source-Loop Transient Electromagnetics Based on Smoothed Inversion-Derived Prior Model[J]. Northwestern Geology, 2026 , 59 (4) : 190 -200 . DOI: 10.12401/j.nwg.2026035
Year 2026 volume 59 Issue 4
177
85
Cite this Article
BibTeX
Article Info
doi: 10.12401/j.nwg.2026035
  • Receive Date:2026-06-11
  • Online Date:2026-09-16
  • Published:2026-08-20
Article Data
Affiliations
History
  • Received:2026-06-11
  • Revised:2026-06-20
  • Accepted:2026-06-20
Affiliations
    1Youfanghao Coal Mine, Hangjinqi Juneng Energy Co., Ltd., Ordos 017000, Inner Mongolia, China
    2Shaanxi Zhengtong Coal Industry Co., Ltd., Xianyang 713600, Shaanxi, China
    3College of Geology and Environment, Xi’an University of Science and Technology, Xi’an 710054, Shaanxi, China
References
Share
https://castjournals.cast.org.cn/joweb/xbdz/EN/10.12401/j.nwg.2026035
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT