收藏切换
Differences in Loess Wetting-Induced Deformation in Fuxian County Controlled by Mineral-Pore Coupling Effects
收藏切换
Chengliang JI1, Wanli XIE2, 3, 4, *, Qiqi LIU2, 3, 4, Jiahao ZHOU2, 3, 4, Chen MA2, 3, 4, Chenfei QU1, Renjie LI1, Libo WANG1
Northwestern Geology | 2026, 59(2) : 59 - 71
Less
收藏切换
Northwestern Geology | 2026, 59(2): 59-71
Differences in Loess Wetting-Induced Deformation in Fuxian County Controlled by Mineral-Pore Coupling Effects
Full
Chengliang JI1, Wanli XIE2, 3, 4, *, Qiqi LIU2, 3, 4, Jiahao ZHOU2, 3, 4, Chen MA2, 3, 4, Chenfei QU1, Renjie LI1, Libo WANG1
Affiliations
  • 1Survey Division, Shandong Electric Power Engineering Consulting Institute Co., Ltd, Jinan 250013, Shandong, China
  • 2Department of Geology, Northwest University, Xi’an 710069, Shaanxi, China
  • 3State Key Laboratory of Continental Evolution and Early Life, Northwest University, Xi’an 710069, Shaanxi, China
  • 4Xi’an Key Lab of Prevention of Loess Dynamic Disaster and Low-Carbon Remediation, Northwest University, Xi’an 710069, Shaanxi, China
Published: 2026-04-20 doi: 10.12401/j.nwg.2025136
Outline
收藏切换

The study of the wetting-induced deformation mechanism of loess is of great importance for engineering disaster prevention and control in the Loess Plateau region. This research focuses on the Q3p and Q2p loess from Fuxian County, northern Shaanxi, aiming to reveal the deformation behavior and underlying mechanisms of loess from different geological eras under wetting conditions. A comparative study of the engineering properties of the two types of loess was systematically conducted through a series of physico-mechanical tests, mineral composition analysis, scanning electron microscopy (SEM) observations, and multi-condition consolidation-collapse tests. The results indicate that the consolidation deformation process of both types of loess can be divided into three stages: slow deformation under low pressure, accelerated deformation under medium pressure, and stabilized deformation under high pressure. Under high pressure conditions, the consolidation deformation becomes more sensitive to changes in initial water content. With increasing initial water content, the compression deformation of the Q3p specimens intensifies significantly, while that of the Q2p specimens weakens. In collapse tests, the two groups exhibited fundamentally opposite deformation characteristics: the Q3p specimens showed typical collapse behavior, with the collapse coefficient initially increasing and then decreasing with rising pressure, whereas the Q2p specimens displayed certain expansion characteristics. As the initial water content increased, the collapse coefficient of the Q3p specimens gradually decreased, while the expansion tendency of the Q2p specimens also weakened. Microstructural analysis revealed that the stability of the loess microstructure, particularly the presence of large pores, provides the necessary space for compression and collapse deformation. Mineral composition analysis indicated that the dissolution of soluble salt minerals (e.g., calcite) exacerbates soil compression and collapse deformation, while the water-absorbing expansion of clay minerals (e.g., illite) partially suppresses these behaviors. This study elucidates the controlling mechanism of the coupling effect between mineral composition and microstructure on the wetting-induced deformation behavior of loess, providing important theoretical support and practical guidance for engineering construction and geohazard mitigation in loess regions.

Loess  /  wetting-induced deformation  /  Scanning Electron Microscopy  /  microscopic mechanisms
纪成亮, 谢婉丽, 刘琦琦, 周嘉豪, 马陈, 曲晨飞, 李仁杰, 王立波. 矿物–孔隙耦合作用控制下富县黄土增湿变形差异性. 西北地质, 2026 , 59 (2) : 59 -71 . DOI: 10.12401/j.nwg.2025136
Chengliang JI, Wanli XIE, Qiqi LIU, Jiahao ZHOU, Chen MA, Chenfei QU, Renjie LI, Libo WANG. Differences in Loess Wetting-Induced Deformation in Fuxian County Controlled by Mineral-Pore Coupling Effects[J]. Northwestern Geology, 2026 , 59 (2) : 59 -71 . DOI: 10.12401/j.nwg.2025136
Year 2026 volume 59 Issue 2
144
69
Cite this Article
BibTeX
Article Info
doi: 10.12401/j.nwg.2025136
  • Receive Date:2025-10-11
  • Online Date:2026-09-16
  • Published:2026-04-20
Article Data
Affiliations
History
  • Received:2025-10-11
  • Revised:2025-11-14
  • Accepted:2025-11-15
Affiliations
    1Survey Division, Shandong Electric Power Engineering Consulting Institute Co., Ltd, Jinan 250013, Shandong, China
    2Department of Geology, Northwest University, Xi’an 710069, Shaanxi, China
    3State Key Laboratory of Continental Evolution and Early Life, Northwest University, Xi’an 710069, Shaanxi, China
    4Xi’an Key Lab of Prevention of Loess Dynamic Disaster and Low-Carbon Remediation, Northwest University, Xi’an 710069, Shaanxi, China
References
Share
https://castjournals.cast.org.cn/joweb/xbdz/EN/10.12401/j.nwg.2025136
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT