收藏切换
Study of the Solidification Process of Wind-Transported Sand Utilizing a Composite of Coal Mine Drilling Slurry and Lignin
收藏切换
Yanqiu QI1, Zongjin WANG1, Zihan AI2, Lei WANG3, Chaoying GU2, Jinyu LI2, Xingang WANG2, *
Northwestern Geology | 2026, 59(2) : 99 - 106
Less
收藏切换
Northwestern Geology | 2026, 59(2): 99-106
Study of the Solidification Process of Wind-Transported Sand Utilizing a Composite of Coal Mine Drilling Slurry and Lignin
Full
Yanqiu QI1, Zongjin WANG1, Zihan AI2, Lei WANG3, Chaoying GU2, Jinyu LI2, Xingang WANG2, *
Affiliations
  • 1China Coal Special Sinking Co., Ltd., Anhui 230001, Hefei, China
  • 2Department of Geology, Northwest University, Digital Twin and Major Facility Disaster Prevention and Control Key Laboratory of Higher Education in Shaanxi Province, Xi'an 710069, Shaanxi, China
  • 3Xi'an Engineering Investigation & Design Research Institute, China National Nonferrous Metals Industry Co.Ld., Xi'an 710054, Shaanxi, China
Published: 2026-04-20 doi: 10.12401/j.nwg.2025065
Outline
收藏切换

With the promotion of the national policy of developing the western region, the shortage of building materials in the surrounding areas of the northwest desert in China has become increasingly severe, making wind blown sand the main building choice an urgent need. This study innovatively utilized local waste drilling mud and lignin composite materials to improve aeolian sand, exploring the effects of different ratios of composite solidification materials on the unconfined compressive strength and impermeability characteristics of sand samples. The research results show that: ① Drilling mud and lignin as solidifiers can significantly improve the unconfined compressive strength of sand samples, and its strength shows a linear increasing trend, and with the extension of curing time, it first decreases and then tends to stabilize. ② With the addition of curing agent, the impermeability of the sample has been significantly improved, and this trend shows an initial decrease followed by a stabilization over time. The appropriate proportion of drilling mud and lignin fills the pores inside the sample, wraps around soil particles, and optimizes their structure, making the soil more compact. At the same time, combined with the bonding effect of ion curing agents, it can effectively reduce the size and connectivity of pores, thereby enhancing their ability to resist water infiltration. ③ A composite wind blown sand solidifier was proposed, with an optimal ratio of 3% drilling mud and 8% lignin. This solidifier is economical and environmentally friendly. This study can provide a new idea for the improvement of building materials and the resource utilization of drilling mud in the northwest wind blown sand area.

coal mines  /  drilling mud  /  lignin  /  aeolian sand  /  composite curding
亓燕秋, 王宗金, 艾子涵, 王蕾, 辜超颖, 李金雨, 王新刚. 煤矿钻井泥浆–木质素复合固化风积沙试验研究. 西北地质, 2026 , 59 (2) : 99 -106 . DOI: 10.12401/j.nwg.2025065
Yanqiu QI, Zongjin WANG, Zihan AI, Lei WANG, Chaoying GU, Jinyu LI, Xingang WANG. Study of the Solidification Process of Wind-Transported Sand Utilizing a Composite of Coal Mine Drilling Slurry and Lignin[J]. Northwestern Geology, 2026 , 59 (2) : 99 -106 . DOI: 10.12401/j.nwg.2025065
Year 2026 volume 59 Issue 2
152
72
Cite this Article
BibTeX
Article Info
doi: 10.12401/j.nwg.2025065
  • Receive Date:2025-03-03
  • Online Date:2026-09-16
  • Published:2026-04-20
Article Data
Affiliations
History
  • Received:2025-03-03
  • Revised:2025-04-27
  • Accepted:2025-05-05
Affiliations
    1China Coal Special Sinking Co., Ltd., Anhui 230001, Hefei, China
    2Department of Geology, Northwest University, Digital Twin and Major Facility Disaster Prevention and Control Key Laboratory of Higher Education in Shaanxi Province, Xi'an 710069, Shaanxi, China
    3Xi'an Engineering Investigation & Design Research Institute, China National Nonferrous Metals Industry Co.Ld., Xi'an 710054, Shaanxi, China
References
Share
https://castjournals.cast.org.cn/joweb/xbdz/EN/10.12401/j.nwg.2025065
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT