收藏切换
Tectonic Characteristics and Mechanism of the Yellow River Flowing Zone on the Northeasten Qinghai-Tibet Plateau: Example from Lanzhou-Shapotou Section
收藏切换
Fenghao DUAN1, 2, Qian WANG3, Yongjun LI3, *, Jianbing PENG1, 2, Panlong WANG3, Sanyou CHENG3
Northwestern Geology | 2026, 59(2) : 207 - 218
Less
收藏切换
Northwestern Geology | 2026, 59(2): 207-218
Tectonic Characteristics and Mechanism of the Yellow River Flowing Zone on the Northeasten Qinghai-Tibet Plateau: Example from Lanzhou-Shapotou Section
Full
Fenghao DUAN1, 2, Qian WANG3, Yongjun LI3, *, Jianbing PENG1, 2, Panlong WANG3, Sanyou CHENG3
Affiliations
  • 1School of Geological Engineering and Geomatics, Chang'an University, Xi'an 710054, Shaanxi, China
  • 2Academy of Yellow River Sciences of Shaanxi Province, Xi'an 710054, Shaanxi, China
  • 3School of Earth Science and Resources, Chang'an University, Xi'an 710054, Shaanxi, China
Published: 2026-04-20 doi: 10.12401/j.nwg.2025032
Outline
收藏切换

This study aims to unravel the genetic mechanism governing the high-angle sharp bends of the Yellow River channel that cut across mountain ranges within the Lanzhou–Zhongwei Shapotou reach on the northeastern margin of the Tibetan Plateau, as well as to clarify the controlling effects of fault structures on the formation and long-term evolution of the river channel. Integrating field geological surveys, remote sensing interpretation, and regional geological analysis with tectonic geomorphology, this study focused on the geological structural characteristics of the two representative high-angle bend segments at Luoquanwan in Lanzhou and Wufo Township in Jingtai. The distribution and activity properties of fault systems were analyzed to evaluate their impacts on the spatial alignment of the Yellow River channel. Our results demonstrate that the Lanzhou–Zhongwei reach of the Yellow River is predominantly aligned along NE-, NEE-, and NW-trending fault zones, with particularly strong control exerted by NE-trending extensional strike-slip faults. These faults represent the key structural driver that facilitated river incision through mountain ranges and triggered channel avulsions. At both Luoquanwan and Wufo Township, the river did not follow the pre-existing NW–SE trending piedmont depression zones for natural downstream propagation, instead, it developed near right-angle sharp bends and cut across or obliquely traversed the NW-SE trending mountain ranges. The Yellow River channel predominantly develops within tectonic junctions and structural fracture zones formed by regional faults. The intersection, strike-slip, and thrusting of NE-trending and NW–NWW-trending faults collectively contribute to the short-line, high-angle bends of the river channel and its traversal of topographically elevated mountain systems. The Yellow River channel is primarily developed within tectonic junctions and structural fracture or fault crush zones formed by regional fault systems. Fault structures are the dominant controlling factor governing the channel extension and bending, particularly in driving the river to deviate from its original main course direction, dissect mountains, and traverse or obliquely cut across mountain systems via short-line, high-angle bends.

Yellow River  /  causes of river channel  /  high-angle bends  /  Qinghai-Tibet Plateau  /  Lanzhou–Zhongwei
段丰浩, 王芊, 李永军, 彭建兵, 王盼龙, 程三友. 青藏高原东北缘黄河流经带地质构造特征及成因机制:以兰州–中卫沙坡头河段为例. 西北地质, 2026 , 59 (2) : 207 -218 . DOI: 10.12401/j.nwg.2025032
Fenghao DUAN, Qian WANG, Yongjun LI, Jianbing PENG, Panlong WANG, Sanyou CHENG. Tectonic Characteristics and Mechanism of the Yellow River Flowing Zone on the Northeasten Qinghai-Tibet Plateau: Example from Lanzhou-Shapotou Section[J]. Northwestern Geology, 2026 , 59 (2) : 207 -218 . DOI: 10.12401/j.nwg.2025032
Year 2026 volume 59 Issue 2
182
93
Cite this Article
BibTeX
Article Info
doi: 10.12401/j.nwg.2025032
  • Receive Date:2024-07-30
  • Online Date:2026-09-16
  • Published:2026-04-20
Article Data
Affiliations
History
  • Received:2024-07-30
  • Revised:2025-02-05
  • Accepted:2025-03-16
Affiliations
    1School of Geological Engineering and Geomatics, Chang'an University, Xi'an 710054, Shaanxi, China
    2Academy of Yellow River Sciences of Shaanxi Province, Xi'an 710054, Shaanxi, China
    3School of Earth Science and Resources, Chang'an University, Xi'an 710054, Shaanxi, China
References
Share
https://castjournals.cast.org.cn/joweb/xbdz/EN/10.12401/j.nwg.2025032
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT