Home Latest Articles
Latest Articles
  • Jing-Jie LI, Ming-Guo WANG, Tao YANG, Sheng LIAN, Jian-Yue FENG, Jie-Liang XIAN
    Geophysical and Geochemical Exploration. 2026, 50(2): 373-384.

    Soil organic matter (SOM) plays a crucial role in the global carbon cycle. Through statistical analysis and correlation analysis, this paper investigated the SOM content and its influencing factors for 105 groups of surface soil samples from the Hongwei-Daxing farms in the northeastern Sanjiang Plain. The results show that the SOM exhibited a content in the study area ranging from 1.72% to 13.80% (average: 4.78%) and significant enrichment in surface soil, with an enrichment coefficient of up to 10.29. The SOM content generally followed a normal pattern in its frequency distribution and an obvious regional pattern in its spatial distribution, with significantly higher SOM observed in the northeast than in the northwest of the study area. In typical soil profiles, both SOM and total nitrogen (TN) content showed a declining trend with the increase of soil depth, suggesting SOM aggregation in the surface soil layer. Meanwhile, the SOM content was positively correlated with some soil physiochemical indicators, such as moisture content, clay particle content, water-stable aggregates, iron oxide (Fe2O3), and TN, which represent favorable factors for SOM accumulation in the study area. In contrast, the SOM content exhibited negative correlations with the bulk density, pH value, and potassium oxide (K2O). Moreover, the variations in soil carbon pools were quantitatively evaluated after the conversion of wetlands to croplands. The results indicate that the average SOM content followed the order of wetlands (8.87%) > dry lands (5.90%) > paddy fields (4.21%). Furthermore, the conversion resulted in a significant increase in soil pH and losses of SOM, TN, and total phosphorus (TP) to varying degrees. Among various soil types, boggy soil exhibited the highest average SOM content of 6.77%, representing a favorable factor for SOM accumulation in the study area. Among various parent materials, the Quaternary high-magnitude floodplain sediments presented the maximum average SOM content in the generated soil. This is attributed to their predominant composition: lacustrine mucky clays and loams, whose high content of clay particles favors SOM accumulation. These findings provide a scientific basis for enhancing the management and sustainable utilization of land resources, wetland protection, and the carbon sequestration function of the area.

  • Hong-Wei SONG, Fan XIA, Hong-Chao LI, Chao YANG, Jian-Ye GUI
    Geophysical and Geochemical Exploration. 2026, 50(2): 385-398.

    The compression and settlement of waste deposits in landfills may cause the deformation failure of leachate collection pipelines in municipal solid waste treatment facilities. This failure will further lead to the rupture of the impermeable layers and subsequent leakage of landfill leachates. Primary methods for monitoring damage to leachate impermeable layers include: laboratory chemical analysis of the pollutant levels of soil and water samples from landfills, and surface geophysical exploration. Building upon the above traditional environmental geological exploration methods, this study achieved effective prediction of landfill leachate leakage using geographic information system (GIS) technology combined with machine learning and influencing factor prediction. Specifically, the landfill area was divided into grid cells with resolution of 5 m × 5 m, which were then assigned corresponding spatial coordinates. A machine learning approach was employed to establish artificial neural network (ANN) models for predicting landfill leakage points. Based on a field investigation of a landfill in North China, 880 test samples and 220 validation samples were selected. The data obtained from these samples, including groundwater table depth, resistivity, polarizability, anomalies of seismic events in radar reflection waveforms, spatial relationships between seismic events and adjacent monitoring boreholes, and half-life information, were used as the input for the models. The output provided the leakage probabilities of all grid cells. Finally, the prediction results of two machine learning methods, the backpropagation (BP) and radial basis function (RBF) neural networks, were comparatively analyzed. The findings indicate that the BP neural network model showed higher prediction performance. The groundwater table depth, resistivity, and the relationship between resistivity and monitoring borehole positions served as the dominant factors influencing the seepage probability prediction of the impermeable layer. By superimposing the posterior probabilities of various influencing factors, the prediction model generated a classification map for leakage risk zones, achieving the objective of graded monitoring of leachate leakage risks within the landfill area.

  • Xiao-Rui ZHAO, Hao CHENG, Xian-Nan WANG, Zhi-Yong FANG, Cheng-Hao LUO
    Geophysical and Geochemical Exploration. 2026, 50(1): 76-85.

    Shearlet transform serves as a tool extensively applied for random noise attenuation in seismic data. However, it faces critical drawbacks: (1) the over-attenuation tendency of valid signals due to its traditional hard-threshold denoising method, especially the loss of weak signals, and (2) ignoring the spatial correlation of Shearlet coefficients. To address these issues, this paper proposed an adaptive-threshold denoising method for seismic data based on the spatial correlation of shearlet coefficients. Specifically, this method constructed a neighborhood correlation model between directional sub-bands in the scale dimension and established a cross-scale coefficient mapping relationship in the spatial dimension. Based on the correlation constraints, an adaptive threshold matrix with physical significance was derived. Theoretical calculation and experimental validation demonstrate the superiority of the proposed adaptive-threshold algorithm in enhancing the quality of seismic data over traditional hard-threshold methods. Specifically, it retained effective signals to the maximum extent during random noise attenuation and significantly improved the amplitude preservation of weak seismic events.

  • Xiao-Ming WANG, Bo LIU, Yu ZHAO, Dong LIU, Shang-Bin LIU, Guang YANG, Shan-Shan HU, Yong-Xing ZHOU, Huai-Feng SUN
    Geophysical and Geochemical Exploration. 2026, 50(1): 86-98.

    Three-dimensional forward modeling in transient electromagnetic (TEM) surveys is a crucial tool for studying the response patterns of different scenarios and targets. A key issue in forward modeling is ensuring that the model closely approximates the actual geological conditions. This paper uses the EM3D software to model and conduct three-dimensional forward analysis of complex terrain and karst geological models, investigating the response characteristics of transient electromagnetic fields under complex geoelectric conditions. The three-dimensional forward simulation of complex terrain models reveals that complex terrain induces distortions in the transient electromagnetic response, and ignoring terrain effects can lead to false anomalies. The three-dimensional forward simulation of complex karst geological models shows that undulating strata and the boundaries of complex karst anomalies also cause distortions in the transient electromagnetic response, significantly interfering with anomaly identification. Analysis of the transient electromagnetic responses of the two complex geoelectric models indicates that the vertical induced electromotive force dBz/dt effectively reflects low-resistivity bodies, the electric field Ey parallel to the source accurately delineates the boundaries of low-resistivity bodies, and the electric field Ex perpendicular to the source shows positive values within the anomaly and coexisting positive and negative values outside the anomaly.

  • Wei YE, Pan-Feng LIU, Bin-Bin SUN, Chao WU, Shuai LI, Yun-Fu XU, Ruo CHEN, Xiao-Han ZHANG, Quan-Cai LI, Shu-Jun HOU
    Geophysical and Geochemical Exploration. 2026, 50(1): 119-127.

    As a crucial means for detecting concealed orebodies, geo-electrochemical measurements can effectively identify the information of subsurface and deep-seated mineral resources in the near-surface environment. Focusing on the Tongjiangling porphyry- and skarn-hosted copper deposit in Jiangxi Province, this study selected an exploration line and then deployed a section extending about 1.6 km for geo-electrochemical measurements. This study aims to investigate the effectiveness of geo-electrochemical measurement technologies and the difference between field and laboratory geo-electrochemical measurements, providing support for technical optimization, wide application, and research on underlying mechanisms. The results indicate that the field geo-electrochemical measurement performed well in the Tongjiangling copper deposit. It can delineate distinct multi-element geo-electrochemical anomalies overlying shallow and deep (nearly 600 m) orebodies. Comparatively, laboratory geo-electrochemical measurement exhibited some anomaly response for elements such as copper (Cu), silver (Ag), and zinc (Zn) above the shallow orebodies, with certain spatial deviations from the actual orebody positions. In addition, it generally represented no anomaly response above deep-seated concealed orebodies. Therefore, it can be concluded that field geo-electrochemical measurement should be prioritized in the similar exploration of landscapes, minerals, and deposits.

  • Jie-Dong JIN, Si-Xin LIU, Jian-Fu NI, Qi LU, Li DENG, Sen TIAN, Qian-Cheng ZHAO, Ming-Qi HU
    Geophysical and Geochemical Exploration. 2026, 50(1): 155-161.

    Simulating the wavefield responses of a ground-penetrating radar (GPR) in the presence of a complex object using a numerical or physical model can provide critical insights for better understanding real-world GPR records and accurately identifying the object. However, current numerical simulations rely primarily on simple point source models while neglecting the physical antenna, thus failing to accurately reflect the actual conditions. Based on the gprMax software, this study delved into the response process and characteristics of the GPR signal by integrating the GPR antenna model and the real-world detection scenario. The results demonstrate that the numerical simulation incorporating the physical antenna model produced responses closer to the actual responses, providing more effective guidance compared to traditional point source simulations.

  • Xi CHEN, Zhong-Liang WU, Xiang-Chun WANG, Ming WANG, Fu-Yuan LI, Meng WANG, Jian-Ping LI, Jiang-Nan LIN
    Geophysical and Geochemical Exploration. 2026, 50(1): 162-168.

    The ocean-bottom seismometers (OBS), a tool extensively utilized in marine geophysical exploration, hold indispensable significance for studies on the Earth's crustal structure, submarine landslide monitoring, and resource exploration. Upon OBS deployment on the ocean's surface, its final landing position typically deviates significantly from the predetermined position due to the influence of various factors. This positional deviation will severely undermine the accuracy of subsequent seismic imaging or inversion. Consequently, the OBS repositioning is necessary during data processing. This study reviewed the primary methods for OBS repositioning and applied them to the OBS data acquired in the Shenhu area, the South China Sea. Prior to data acquisition, the circuit of the data acquisition board was modified, including clock skew correction, achieving timestamp synchronization across the entire acquisition system. Building upon these enhancements, repositioning was successfully performed using the time-slice method. The repositioning results consistently satisfy the rigorous research requirements, while inverted equivalent water velocity and depth parameters demonstrate closer alignment with depth-domain imaging results derived from towed-streamer seismic surveys.

  • Li SHI, Pan MING, Xiao-Ming GENG, Jun LU, Sheng-Xing ZHANG, Mao-Gan DONG
    Geophysical and Geochemical Exploration. 2026, 50(1): 180-187.

    To thoroughly understand the geological characteristics of potential concealed structures in open-pit slopes induced by external factors such as mining activities and rainfall, this study conducted field detection tests on open-pit slopes using a small-loop transient electromagnetic (TEM) system. Field tests demonstrate that the small-loop TEM system exhibited excellent vertical and horizontal resolution, effectively reflecting the electrical characteristics of concealed structures within slopes and the stratification interfaces of lithospheric materials. Accordingly, the small-loop TEM system proved fast and feasible in detecting open-pit slopes. Combined with layered spatially constrained inversion (SCI) technology, surface lithosphere investigations, and geological constraints of strata, the small-loop TEM system can qualitatively and quantitatively interpret the spatial locations and general morphological characteristics of subsurface concealed structures. These interpretations allow for the inference of the material composition and structural properties of the deep lithosphere and the identification of concealed structures in advance, thereby reducing the risk of open-pit slope failure.

  • Fu-Sheng SONG, Chang-Wei MA, Yong-Fei WANG
    Geophysical and Geochemical Exploration. 2026, 50(1): 1-11.

    The study area, a semi-humid alpine mountainous area, is located in the south of the Western Sichuan Plateau. It is characterized by shallow overburden, sparse bedrock outcrops on the surface, and undeveloped drainage systems. Under such a unique landscape, the soil geochemical survey demonstrates significant advantages for the exploration of concealed non-ferrous metal minerals. This study, through 1∶10,000 soil geochemical surveys, systematically identified three element assemblages: gold-arsenic-antimony (Au-As-Sb), lead-zinc (Pb-Zn), and bismuth-tin (Bi-Sn). Through follow-up geochemical surveys, it delineated a composite anomaly zone with high prospecting potential within the study area. A prospecting target was further identified in combination with the geochemical characteristics of elements, element assemblage patterns, and regional metallogenic background. This study revealed a total of five concealed gold orebodies, which were verified by drilling engineering, marking a significant breakthrough in mineral exploration. This fully demonstrates the application potential of this method for gold exploration in shallow overburden areas within the Western Sichuan Plateau.

  • Li-Chun FU, Qing-Yuan SONG, Bo LI, He YUAN, Tian-Kun XIE, Tao-Yuan WANG, Zeng-Tao LI, Long ZHOU, Xue-Feng LI, Xian-Nan ZHU, Jia-Hui WANG, Yi-Cheng LI
    Geophysical and Geochemical Exploration. 2026, 50(1): 12-20.

    In nature, gold typically occurs as extremely fine-grained native gold in an extremely uneven distribution. As a result, some gold deposits (ore occurrences) lack corresponding gold geochemical anomalies, posing significant challenges to geological prospecting based on geochemical anomalies. Hence, under the guidance of the geoscience big data-driven approach, this study identified the correlations among data to address geological prospecting challenges. Based on the soil geochemical data of the Gelebile River area in northeastern Heilongjiang Province, 10 elements in the area were statistically analyzed using the CV1 and CV1/CV2 interpretation diagrams (CV: coefficient of variation), revealing high gold and molybdenum mineralization potential. By constructing a regression model for gold, this study delineated two prospecting targets in the Gelebile River area. The No. 1 prospecting target was verified through trenching and drilling engineering, exposing one gold and one molybdenum ore body. This study demonstrates that the prospecting and prediction model established based on multivariate regression analysis can significantly improve prospecting efficiency. Moreover, it offers an effective solution to quantitative prediction of prospecting targets in small-scale areas where the precise locations of mineral deposits (or occurrences) remain unknown.