Latest ArticlesLeakage hazards in dikes are recognized as a core issue threatening the safety of water conservancy projects. Their complex dynamic evolution characteristics significantly increase the difficulty of detection and monitoring. Traditional monitoring methods, such as manual inspection, sensor technology, remote sensing, and unmanned aerial vehicle technology, are generally characterized by low detection accuracy, insufficient efficiency, and limited penetration capability. Traditional geophysical nondestructive testing methods, including high-resolution electrical resistivity tomography, self-potential method, ground-penetrating radar method, seismic imaging method, transient electromagnetic method, and pseudo-random flow field method, can somewhat reveal the leakage distribution and location information. However, they still fall short in detection accuracy, temporal continuity, and long-term monitoring capability, failing to meet actual engineering needs. In response to the above limitations, this study proposed a technique for monitoring leakage hazards in dikes based on time-lapse high-resolution electrical resistivity tomography. Through high-precision resistivity measurements over multiple periods, the proposed technique enables dynamic tracking and precise identification of leakage hazards, providing reliable technical support for dike safety monitoring. The results indicate that the proposed technique can effectively identify abnormal areas within dikes and assess the severity and development process of hazards by analyzing the resistivity variation trend. Compared to traditional detection methods, the proposed technique achieves higher resolution and more comprehensive hazard information, offering a scientific basis for dike management and maintenance.
The time-frequency electromagnetic method (TFEM) represents an artificial-source electromagnetic survey technology developed by integrating the advantages of both the frequency-domain controlled-source electromagnetic (FD-CSEM) method and the transient electromagnetic (TEM) method. This technology enables simultaneous acquisition of time-domain and frequency-domain electromagnetic responses with a single excitation. It is characterized by large exploration depths, multi-parameter inversion, high signal-to-noise ratio, and strong anti-interference capability, providing technical support for the fine characterization of subsurface structures. This study presents a systematic review of the TEFM, covering its core technical architecture and the equipment development roadmaps in China and abroad, with a particular emphasis on the analysis of the theoretical models, application status, and technical bottlenecks of the TFEM in three major fields, i.e., hydrocarbon exploration, mineral exploration, and geothermal resource surveys. The results of this study indicate that the TFEM effectively overcomes the limitations of traditional electromagnetic methods in exploration depth and parameter dimensionality, thus fully satisfying the high-precision and large-depth requirements of current energy resource exploration. However, its application in mineral and geothermal fields is in a critical stage of large-scale expansion, with its potential yet to be fully tapped. In the future, the TFEM technology will be expanded into fields such as ground-air collaborative detection and 3D/4D time-lapse monitoring, accompanied by constant innovations in multi-physics coupling and intelligent inversion algorithms. These advances will provide new impetus for its industrial application and technological upgrade.
The Lala copper deposit in Sichuan Province is characterized by a thick low-resistivity cover, a great burial depth, and thin ore layers. By comparing the differences in the applicability of the time-frequency electromagnetic method (TFEM) and the audio magnetotelluric method (AMT) to deep copper exploration in this deposit, this study aims to address the issue of insufficient accuracy in the identification of deep targets. The TFEM and AMT methods were applied to the study area for tests. The comparison of the test results with existing drilling data revealed that the TFEM method exhibited a higher resolution than the AMT method and effectively identified the positions of ore layers or zone-bearing layers. These characteristics establish the TFEM method as a preferred approach for the detailed survey of key target areas. Nevertheless, the AMT method remains cost-effective for preliminary exploration of shallow structures. This study offers a valuable case for enriching geophysical methods for deep ore exploration in the study area.
The Jinchanghe ore concentration area in the Baoshan block, Yunnan Province, is located in the northern part of the Baoshan-Zhenkang lead-zinc-copper polymetallic metallogenic belt. This area primarily hosts skarn iron-copper-lead-zinc polymetallic deposits. Previously, strong magnetic anomalies served as the primary geophysical exploration indicators for mineral prospecting in this area, while weak magnetic anomalies gained insufficient attention. Therefore, this study investigated weak magnetic anomalies in this area to reveal their promising potential for mineral prospecting. The time-frequency electromagnetic method and the high-precision magnetic survey were combined to verify weak magnetic anomalies, obtaining information on electrical and magnetic anomalies. Based on geological conditions, the joint inversion of multiple parameters was performed to delineate prospecting targets and precisely determine the spatial morphologies and occurrence locations of deep concealed ore bodies. Through borehole verification, the combined method achieved significant prospecting results. This study serves as an exemplary case for mineral prospecting in the deep and marginal parts of this area and also a reference for the exploration of similar deposits in other areas.
The time-frequency electromagnetic (TFEM) method, a new electromagnetic exploration technique, emerged at the beginning of this century, followed by its introduction and development in the hydrocarbon exploration field. It combines the advantages of both frequency-domain and time-domain electromagnetic techniques, offering a higher resolution and more accurate imaging of underground structures under complex geological conditions. It plays an important role in energy resources exploration. This paper presented the application of the TFEM method in the hydrocarbon exploration in the Niutuozhen uplift. The results indicate that the hydrocarbon reservoirs in this uplift exhibited low-resistance and high-polarization electromagnetic response from the upper layers. Conversely, they showed the high-resistance and high-polarization electromagnetic response from the internal. Based on the TFEM abnormal response patterns, five play fairways were delineated in the Niutuozhen uplift, which were basically consistent with known drilling data. This study provides a solid foundation for the hydrocarbon development and utilization in this area.
The Yamenzi area is located within the Yanshan-Liaoning metallogenic belt in the middle segment along the northern margin of the North China plate. This metallogenic belt serves as an important one for nonferrous and precious metals in China, characterized by favorable geological conditions for volcanic to subvolcanic silver-polymetallic ores. To further optimize targets and evaluate their potential for ore prospecting, this study conducted a 1∶10,000 soil geochemical survey in the Yamenzi area. By analyzing mathematical statistics and delineating anomaly contrasts of the 12 testing elements, silver (Ag), lead (Pb), zinc (Zn), and gold (Au) were identified as the primary metallogenic elements of the area. Based on the metallogenic geological setting and the coincidence of element anomalies, five prospecting targets were identified. Subsequently, these targets were verified by trenching and drilling engineering, revealing multiple Ag-Pb-Zn orebodies. A comprehensive comparison revealed similar patterns of Ag-Pb-Zn metallogenic belts between the Yamenzi in Hebei and Zhijiadi in Shanxi. Therefore, further investigating metallogenic regularity within the Yamenzi area could potentially guide the discovery of larger-scale orebodies.
The Foping area, a geological dome in southern Shaanxi Province, has long been a geothermal blank zone. To explore the deep structural characteristics and stratigraphic configurations of the dome and preliminarily delineate the accumulation range of geothermal water, this study arranged the wide-field electromagnetic method (WFEM) and soil radon measurement profiles in the Foping area. Through field data collection, processing, and inversion, the electrical structural characteristics of the Foping area within a burial depth of 4 000 m were obtained. A new understanding was proposed accordingly: the Foping area develops multiple nappes from northwest to southeast, with the northern and southern sections dominated by thrusting and gliding, respectively. Its overall structural style is manifested as an antiform centered around Foping County. A continuous low-resistivity anomaly zone, occurring in the deep part, is associated with the roof detachment fault and the fracture zones formed in the central and lateral parts during rock intrusion. These faults create conditions for the downward migration and storage of groundwater. The superposition of thrusting rock fragments has led to well-developed fractures between rock fragments and pores, vugs, and fractures in brittle rocks such as marbles and quartzites, constituting the space for the occurrence of geothermal water. Based on objective factors such as local industrial planning, economic development, and road conditions, drilling work was conducted in Jiaochangba Village, Changjiaoba Town, 2.5 km north of Foping County, along the west bank of the Jiaoxi River. The completed well reached a depth of 2 002 m, producing geothermal water with a temperature of 35 ℃ at a flow rate of 392 m3/d. This achievement breaks through the traditional concept that the Foping dome contains no or little water. Therefore, this study provides actual data for exploring the geological structural characteristics and hydrogeological conditions in the Foping area, as well as a reliable basis for basic geological theory research.
Near-surface layers are typically characterized by loose structures and significant vertical and lateral variations in both thickness and velocity. These characteristics result in marked absorption of seismic wave energy and severe phase distortion, substantially reducing the signal-to-noise ratio (SNR) and resolution of acquired seismic records. The absorption properties of these layers can be described by the quality factor (Q-value). Given the complex structures of near-surface layers, constructing a precise quality factor field requires simultaneous consideration of their pronounced vertical and lateral variations. This study first summarized an optimization strategy for quality factor inversion based on data from uphole surveys by analyzing the applicability of common Q-value inversion methods. To further enhance the accuracy of near-surface quality factor field modeling, this study proposed a method for constructing precise quality factor field models. This method integrates high-resolution information from uphole survey data with high sampling-rate information from reflection wave data. Tests on real data demonstrate that the proposed method effectively captures detailed variations in lateral Q-values of the layers. The compensated seismic waves exhibited broadened effective frequency bands and significantly improved seismic resolution, thereby validating the effectiveness of the presented approach.
In the monitoring of geologic CO2 sequestration, time-lapse seismic data can capture the CO2 injection-induced subtle changes in CO2 saturation and associated reservoir physical properties, which are crucial for evaluating the storage safety and effectiveness. Although conventional full-waveform inversion can exploit full-waveform information in time-lapse seismic data, it is highly nonlinear and strongly dependent on the initial model and low-frequency components, rendering it prone to cycle skipping. Hence, this study incorporated wavefield reconstruction inversion (WRI) into time-lapse seismic inversion, combined with parallel and double-difference inversion strategies, to establish an inversion process for monitoring geologic CO2 sequestration. Model test results show that the WRI, based on the parallel inversion strategy, effectively suppressed artifacts while also recovering the geometric morphologies of velocity-change zones. The double-difference inversion strategy further enhanced inversion stability. The WRI, based on the double-difference strategy, accurately captured velocity perturbations in both strong and weak velocity-change zones, yielding significantly reduced artifacts and outperforming conventional methods in both boundary clarity and amplitude recovery. Overall, this inversion method improves the inversion accuracy of the target area while also enhancing the identifiability of reservoir changes, serving as a robust and reliable technical approach for 4D seismic monitoring of geologic CO2 sequestration.
The microtremor surface waves collected from karst areas, where near-surface conditions are complex, often show low signal-to-noise ratios (SNRs) and poor data quality, thus restricting the detection accuracy. Hence, this study proposed a microtremor surface wave imaging method based on singular value decomposition (SVD). First, the single-trace virtual-source empirical Green's function obtained by cross-correlation was reconstructed through SVD. The signal components corresponding to large singular values were extracted to reconstruct the wave field, thereby effectively suppressing the noise and improving the SNRs of surface waves. Second, the virtual-source multi-trace records were constructed using the reconstructed signal with high SNRs. The dispersion energy spectrum was derived through the F-K transform, obtaining significantly improved surface wave dispersion bands in terms of resolution and continuity. Third, the frequency dispersion curves were extracted from the optimized dispersion energy spectrum. The joint inversion strategy employing the genetic algorithm and damped least squares was used to further improve the imaging accuracy, considering the globally optimal solution and convergence efficiency. Fourth, by integrating the inversion results of all survey points in the study area, a two-dimensional shear wave velocity profile was constructed to reveal the underground structural characteristics and the spatial distribution of karsts in the study area. The practical application in a karst area demonstrates that the proposed method can effectively improve the imaging quality of the karst area with complex near-surface conditions, providing reliable technical support for the fine-scale structure detection and geological interpretation in karst areas.