Latest ArticlesDetecting pile foundation depths is essential for engineering construction in urban areas. However, traditional approaches for this detection mostly exhibit insufficient accuracy. Pile foundations are primarily composed of concrete and steel bars, displaying distinct electrical conductivity from the background values. Electrical methods are sensitive to subsurface conductivity variations, thus providing a novel approach for detecting pile foundation depths. Focusing on typical pile foundations used in the engineering construction of Guangzhou Metro, this study evaluated the effectiveness of dipole-dipole and Wenner configurations in detecting pile foundation depths through numerical simulations. Furthermore, the pile foundation depths were predicted using a random forest model. The results indicate that both configurations could detect the potential differences and apparent resistivity responses of pile foundations at burial depths not exceeding 30 m. After training with
The analysis and interpretation of ground-penetrating radar (GPR) echo signals mostly rely on the experience of professionals and are thus highly subjective, affecting detection efficiency and accuracy. To address the challenge of poor imaging quality induced by the indistinct cavity signal features after rebar signal suppression, this study proposes a layered frequency-domain range migration imaging algorithm that combines deconvolution filtering and curvelet transform. Specifically, to compress the side lobes of wavelets and enhance the characteristics of weak reflected signals, deconvolution filtering is incorporated into data preprocessing, thus focusing the reflected energy along cavity boundaries. To retain the details of curve edges and improve imaging quality, the curvelet transform is employed. The proposed algorithm, which combines both, allows for the effective characterization of the geometric features of cavity targets while highlighting the dominant frequency components of signals, thereby enhancing imaging quality.
To achieve high-quality mapping between surface 2D gravity anomaly observations and subsurface three-dimensional (3D) density geological bodies, this paper proposes a novel deep learning network architecture—Fusion Kernel Attention Network (FKANET). Compared to conventional neural network models previously used for 3D gravity inversion, FKANET can improve the inversion accuracy of both geometry and density amplitude of subsurface 3D density geological bodies while significantly reducing the number of network parameters. Furthermore, to address the widespread noise in actual gravity anomaly observations, this study reconstructs an improved network model based on a multi-task framework using the FKANET architecture, aiming to achieve simultaneous inversion and denoising of noisy data. Both tasks share the same encoder to extract gravity anomaly features from the raw gravity anomaly observations. In contrast, two independent decoders are used to perform denoising and 3D geological body inversion individually. Besides the adaptive denoising capability to effectively suppress the noise interferences in gravity anomaly observations, this multi-task framework poses sufficient constraints on the inversion process to enhance the model's ability to resolve subsurface 3D density geological bodies. These characteristics collectively enhance the stability and accuracy of inversion results. This method was applied to the inversion of field data from the Sannicolas region in central Mexico, demonstrating that the multi-task FKANET can achieve high-precision, real-time inversion of geological boundaries and density while also exhibiting excellent noise immunity.
In current geochemical surveys of stream sediments, manual sampling point arrangement predominates. However, manual arrangement faces several challenges, including heavy workload, high subjectivity, and insufficient control over river basin coverage. Moreover, the lack of effective quality inspection after sampling point arrangement renders it difficult to ensure the rationality of the arrangement. These issues affect field operations and the reliability of subsequent geochemical interpretations. Using the ArcGIS system, this study implemented computer automation-based scientific sampling point arrangement as per the geometric characteristics (e.g., order and length) of streams. Furthermore, a model for the verification of sampling point rationality was developed to assess the rationality of the distribution and sampleability of the automatically arranged sampling points. The proposed method was applied to the sampling point arrangement of stream sediments in the Majiagou area within the 1∶
This study investigated the compensated neutron log (CNL) responses of cased holes placed in hydrogen storage strata, aiming to quantify the impacts of casing on neutron porosity measurements, with emphasis placed on hydrogen-bearing strata. Using the Monte Carlo numerical simulation method, the models of open and cased holes were constructed to simulate the CNL responses under varying porosity and hydrogen saturation conditions. Furthermore, the relationship between the neutron count ratio from long- to short-distance detectors and the formation hydrogen index (HI) was analyzed. The analytical results indicate that the application of the casing and cement sheath may lead to an underestimation of the apparent HI in the cased hole, with the offset showing a non-linear increase with formation porosity and hydrogen saturation. Based on this, a fitting model incorporating formation porosity, hydrogen saturation, and HI offset was established, yielding a fitting accuracy of 0.9936. Therefore, this model enables effective quantification of the HI offset induced by casing under the condition of varying porosity and hydrogen saturation. Overall, the results of this study can provide a theoretical basis for interpreting the CNL data from cased holes placed in hydrogen storage strata.
Investigating the migration and accumulation of heavy metals in the soil-crop-human system is of great significance for assessing the degree of regional heavy metal accumulate, potential ecological risks, and human health impacts. Based on data from 1∶50,000 eco-geochemical surveys, this study examined the heavy metal contents in the soil-crop-human system and associated health risks in the Shuangyang River basin. The results indicate the enrichment of some heavy metals in soil samples, although their contents fell below the risk screening levels of soil contamination. Heavy metal contents in crop seeds all complied with national food safety standards. Heavy metal contents in women's hair were generally higher than those in men's hair. In some samples, the cadmium (Cd) or mercury (Hg) content exceeded the reference range, showing relatively rich characteristics. In terms of age, the highest heavy metal contents were observed in people aged 41~50, while those of other age groups exhibited decreased heavy metal contents to varying degrees. Crops showed bio-concentration factors (BCF) of soil heavy metals far less than 1, while human hair exhibited BCFs of crop-hosted heavy metals exceeding 1, suggesting that human hair can significantly concentrate and amplify heavy metals. These results indicate a V-shaped pattern of heavy metal migration and accumulation in the soil-crop-human system. The enrichment capacity and contamination degree of individual heavy metals decreased in the order of As, Ni, Cu, Cr, Cd, Pb, Zn, and Hg, with Cd and Hg identified as the primary elements posing potential ecological hazards. The exposure levels and risk indices of non-carcinogenic and carcinogenic pathways decreased in the order of ADDimouth (average daily dose via oral intake), ADDidermal (average daily dose via dermal contact), and ADDibreathe (average daily dose via inhalation). This result reveals that oral intake represents the primary pathway of health risks associated with heavy metals in the soil-crop-human system in the study area. Therefore, emphasis should be placed on dietary exposure risks in the health risk management of heavy metals. The health risk indices of various heavy metals decreased in the order of As, Cr, Pb, Ni, Cu, Zn, Cd, and Hg. Additionally, children exhibited higher average daily exposure and non-carcinogenic risk indices than adults. While posing insignificant non-carcinogenic risks to adults, heavy metals carried a certain level of non-carcinogenic risks to children presumably due to their physiological characteristics, exposure duration, and dietary intake. This issue warrants attention from local agencies. The results of this study provide a scientific basis for local government departments to accurately assess and warn of human health risks and to develop scientifically robust standards of food safety and environmental protection.
To investigate the spatial patterns of soil organic matter (SOM) at the county scale in karst transition zones, this study focused on Xingwen County, Sichuan Province. Based on 3,497 surface soil samples, the study analyzed the characteristics of SOM, total nitrogen (TN), total phosphorus (TP), and pH. It revealed differences in SOM across different stratigraphic units and elevation ranges and estimated the density and reserves of surface soil organic carbon (SOC). The results indicate that the mean SOM content in the study area’s surface soil was 22.70 × 10−3; spatial variation was significant; the soil was slightly acidic (mean pH 5.71); TN was relatively abundant, while TP was relatively low. Geological background was the dominant factor controlling the spatial variation of SOM, with elevation serving as a secondary influencing factor. The Permian stratigraphic unit exhibited the highest mean SOM content (29.77 × 10−3), with the soil SOM content in the coal-bearing clastic rock area of the Yuanjiadong–Xingwen Formation reaching as high as 36.39 × 10−3. while the Jurassic strata had the lowest (16.80 ×10−3). Furthermore, SOM content in high-altitude areas (>1,000 m) was approximately 35% higher than in low-altitude areas (<400 m); Soil fertility exhibits a pattern characterized by “sufficient nitrogen, phosphorus deficiency, and relatively abundant organic matter”; the average surface soil carbon (SOC) density is 3,423 t/km2, with a total stock of approximately 3.88 × 106 t, and the soil carbon density in the Permian stratigraphic unit is about 1.77 times that of the Jurassic. These findings provide geochemical evidence to support geologically based zoning for farmland fertility improvement in karst transition zones, differentiated carbon sink management (strict protection of high-carbon-density Permian soil areas and carbon enrichment and fertility improvement in low-carbon-density Jurassic soil areas), and precise regulation of phosphorus nutrients.
This study aims to gain insights into soil pH, the degree of abundance of beneficial nutritional elements in soils, and the characteristics of element migration and accumulation within the rhizosphere soil-tea leaf system in the Yangxi-Tongle area of Sanjiang Dong Autonomous County, Guangxi Province. This study conducted a statistical analysis of 881 sets of geochemical data from topsoil in agricultural land and 14 sets of data from the tea leaf - rhizosphere soil system across 315 km2 in the study area. The analytical results indicate that topsoil in the study area is acidic to strongly acidic, while the rhizosphere soil of tea trees is strongly acidic. The soils exhibit strong heterogeneity of Mn, Se, and Mo, with soil elements demonstrating distinct N-Corg-S and Cu-Mo-Se associations. The results also show that soils in the study possess fairly abundant to abundant total N, total K, organic matter, S, B, and Mo; fairly deficient to deficient total phosphorus, Ca, Mg, Fe, Mn, Cu, Zn, and F; and abundant Se. Tea leaves exhibit relatively strong capacity for bioaccumulation of Zn, Cu, Cd, B, Ni, and F in soils, but relatively weak capacity for bioaccumulation of As, Pb, Cr, and Ge. This study concludes that tea leaves in the study area contain moderate Se content; low contents of Cd, As, and Hg; and a Pb content within regulatory limits, suggesting generally safe tea quality. The results of this study further provide a geochemical basis for the healthy development of the local tea industry.
Focusing on the typical loess surface structure in the Xiaoyi area, Shanxi Province, China, this study elaborates on the geometry selection, data processing, and data interpretation of the microlog survey method with sources in the borehole and receivers at the surface, and achieve several findings. The microlog survey via in-borehole seismic wave excitation exhibits encouraging source-media coupling effects, clear first-break onset, and seismic records with high signal-to-noise ratios (SNRs). Given the presence of source-receiver offset in microlog survey data, the inclined ray path from the shot point to that the receiver point should be corrected to a vertical path. Based on the correction equation, the source-receiver offset should be less than 10 m in practical applications. The loess structure in the study area shows significant vertical stratification. At the cliff, the seismic velocity on the side near the collapse section is significantly lower than that on the side far away from the section, with vertical fractures distributed within the loess layers. Literally, the P-wave velocity varies with the observation azimuth due to heterogeneous local compaction, presenting a quasi-elliptical distribution pattern overall. Therefore, the circular-array geometry can enable the microlog survey to investigate the velocities and thicknesses of low-velocity zones in loess and to characterize the velocity heterogeneity across various loess layers.
This study aims to address the technical challenges in exploring concealed ore bodies in alpine shallow overburden areas. Hence, it conducted the application test and demonstration of deep-penetrating geochemical exploration techniques in two typical landscape areas: the low-to-middle mountainous desert steppe and the alluvial-proluvial gravelly Gobi along the periphery of the Qaidam Basin. The results show that the proportions of fine-grained (d≤96 μm), micro-fine-grained (d≤20 μm), and ultra-fine-grained (d≤5 μm) materials in the overburden serve as the core basis for evaluating the effectiveness and adaptability of deep-penetrating geochemical exploration techniques. Through the multi-technique effectiveness tests conducted in the Relong and Yuka gold deposits, the differences in application efficiency of various techniques across different landscape areas were clarified. The measurement of micro-fine-grained soils was employed for a large-scale demonstration application, with the delineated anomalies highly coinciding with the known mineralized zones. Moreover, a concealed ore body with a gold grade of up to 3.85 g/t was discovered in the Relong gold deposit. Finally, a three-level technical combination, consisting of regional reconnaissance, anomaly verification, and ore body positioning, was proposed for alpine shallow overburden areas. Overall, the results of this study provide technical support for the exploration of concealed ore bodies in similar areas.