Home Latest Articles
Latest Articles
  • Hong-Bo LIU, Fan-Peng KONG, Siqinbilige, Ye ZHANG, Lei ZHANG
    Geophysical and Geochemical Exploration. 2026, 50(4): 635-643.

    This study aims to reveal the source of salts in the soda saline-alkali land in the western Songnen Plain. Focusing on Taonan City under the administration of Baicheng City in Jilin Province, this study systematically investigated the weathering and saline-alkali ion release characteristics of pyroclastic rocks, granites, and sandstones along the eastern margin of the Great Xing'an Range. The results indicate that rocks in the study area remain in the early-to-middle stage of chemical weathering, predominantly releasing Ca, K, Na, and Si. The loss of saline-alkali ions per unit mass of the rocks decreases in the order of pyroclastic rocks, sandstones, and granites. When migrating from high-elevation hills to low-lying plains, groundwater is enriched in substantial Na+ and HCO3−, accompanied by a slight increase in the K+ content and loss of Ca2+, SO42−, Cl−, and Mg2+ ions, with the pH value elevated. The results demonstrate that the weathering of plagioclases in pyroclastic rocks contributes largely to salinization and alkalization. Furthermore, the early-to-middle chemical weathering represents the key process of the release of saline-alkali ions, while topography-driven water and salt migration emerges as the dominant path of ion enrichment. The results of this study provide a scientific basis for the precise prevention and control of regional saline-alkali land and ecological restoration.

  • Yi HUAN, Jin-Bao SU, Xiao-Gang ZHENG, Jian-Jun CUI, Zi-Qiang ZHU
    Geophysical and Geochemical Exploration. 2026, 50(4): 644-654.

    Subsurface brine in the Zigong area of the Sichuan Basin contains salt and is also enriched in critical metal lithium, primarily occurring in the axial parts of anticlines. After years of exploitation, the Zigong area is now facing scarce brine resources and difficulty in reserve replacement. Fold flanks in the area may hold considerable resource potential; however, there is a lack of studies on deep brine exploration along fold flanks. This study investigated deep subsurface brine in the Tiejianggou and Xiangyangwan zones, which are located along anticlinal and synclinal flanks in the Zigong area, respectively. Petrophysical investigation and wide-field electromagnetic exploration reveal significantly varying deep electrical properties in both zones. Based on stratigraphic and structural constraints, this study performed comprehensive interpretations of deep electrical structures and low-resistivity anomalies in both zones. The results indicate that a 1500-m-deep profile in both zones exhibits significant electrical zonation characterized by low resistivity in the upper part and high resistivity in the lower part. The interval spanning from the lower part of the Xujiahe Formation to the upper part of the Leikoupo Formation is identified as a favorable exploration target. Layered, quasi-layered, or elliptical low-resistivity anomalies are identified in both zones, corresponding well to the occurrence horizons of regionally proven yellow brine. Drilling results of the Tiejianggou zone further verify the reliability of the geological anomaly interpretation. The findings lead to the conclusion that fold flanks also exhibit favorable conditions for the enrichment and preservation of subsurface brine, representing an important replacement for deep brine prospecting in the Zigong area. The results of this study provide novel insights for both resource exploration in the periphery of mature salt-producing areas and the investigation of the occurrence patterns of subsurface brine.

  • Huan WEN, Li-Ming DING, Zhen WANG, Jie LI, Zhong-Hua LI
    Geophysical and Geochemical Exploration. 2026, 50(4): 655-664.

    In some blocks of the Ordovician carbonate reservoirs in the Tahe Oilfield, the development has entered the middle and late stages, and the oil-water relationship is extremely complex, with a high risk of drilling. To solve the problem of predicting the distribution of remaining oil, a research and development experiment on detecting remaining oil using time-frequency electromagnetic methods has been carried out in the TH10X well area of the Tahe Oilfield. Aiming at the characteristics of strong heterogeneity in fractured-vuggy carbonate reservoirs, high-quality three-dimensional electromagnetic data have been obtained through the excitation of dual-source electromagnetic fields that are perpendicular to each other and three-dimensional data collection with an array of 100 m×100 m. On this basis, the resistivity-constrained inversion, polarizability-constrained inversion, and differential anomaly extraction have been carried out, and resistivity, polarizability anomalies, and dual-frequency phase differential anomalies in the study area was obtained. Finally, the production data of the actual drilled wells was used for calibration, and the potential areas of remaining oil distribution have been delineated. Later drilling verification has shown that there is abundant remaining oil at the No. 2 potential point, confirming the effectiveness of the method.

  • Zhong LI, Jin-Ming WANG, Rong ZHANG, Yuan-Bin LI, Xu-Feng SONG, Ming-Hong ZHAO, Chao-Wen MA
    Geophysical and Geochemical Exploration. 2026, 50(4): 665-672.

    The Bijiashan antimony deposit represents a medium- to low-temperature hydrothermal deposit. Based on the geological characteristics and electrical properties of the deposit, and employing the audio-frequency magnetotelluric (AMT) method, this study detected and analyzed the deep geological structures along the periphery of the deposit, thus effectively identifying the electrical and structural characteristics of the deposit in the subsurface space. Specifically, an AMT-based theoretical model of mineralization (prospecting) was constructed for the deposit. An AMT-based prospecting criterion was determined for the deposit: the anticlinal axis and the transition zones of anticlinal flanks (i.e., interlayer fracture zones) are located on the middle- to high-resistivity contact zone, which exhibits a saddle-shaped distribution on the section. Accordingly, the distribution of the anticlinal core, characterized by steep western and gentle eastern portions, was identified. The anticlinal axis and interlayer fracture zones were accurately localized. Their locations were presumed to be favorable areas for mineralization. The drilling verification of geophysical anomalies reveals the concealed antimony mineralized bodies, marking a breakthrough in deep mineral prospecting and proving the feasibility of the AMT method. Overall, the results of this study demonstrate that the AMT method is an effective geophysical technique in exploring the Bijiashan antimony deposit and other similar deposits.

  • Zhi-Wei MIAO
    Geophysical and Geochemical Exploration. 2026, 50(4): 673-683.

    The tight sandstone reservoirs of the braided river delta facies in the Xujiahe Formation of the Sichuan Basin represent a critical target for the reserve growth and production addition of hydrocarbons. In the TJ area, the Xujiahe Formation exhibits deep burial depths, complex lithologies, unconfirmed petrophysical patterns of dominant lithofacies, and rapid lateral variations in reservoirs, which jointly limit the reservoir prediction accuracy. This study aims to address the challenges in reservoir prediction. First, considering the impacts of multi-mineral components, a generalized Xu-White petrophysical model was developed to accurately determine the factors for lithologic and reservoir identification. Then, using a reflectivity objective function with time-offset dual constraints developed in this study, the amplitude versus offset (AVO) reflectivity extraction method was improved, contributing to the acquisition of accurate ternary reflectivity volumes. Accordingly, high-resolution prestack elastic parameter volumes were determined through Bayesian inversion. Finally, the distribution of sandstone reservoirs was predicted thoroughly by combining factors for lithologic and reservoir identification, as well as high-resolution prestack inversion results. The improved AVO reflectivity inversion accurately predicted the distribution of sandstones and reservoirs in the TJ area, delivering satisfactory performance in predicting highly heterogeneous tight sandstone reservoirs. This study provides a novel approach to prestack prediction of tight sandstone reservoirs.

  • Xiao-Rong ZHOU, Wen-Mao TU, Xiu-Lin SHI, Ren-Fu WANG, Yi LONG, Chun WANG, Da HU
    Geophysical and Geochemical Exploration. 2026, 50(4): 684-697.

    Faults act as critical migration pathways and reservoir space for hydrocarbons. Therefore, accurate fault identification is an important prerequisite for breakthroughs in hydrocarbon exploration. However, conventional manual interpretation suffers from low efficiency, while prediction based solely on artificial intelligence (AI) depends on massive data annotations and lacks geological constraints. In this context, this study developed a geologically constrained semi-supervised AI technique for fault prediction. For this technique, geological insights were transformed into quality control constraints, and a closed-loop process consisting of machine prediction, manual supervision, and model optimization was designed. With a small number of annotations as anchors, this technique allowed for the efficient extraction of multi-scale fault features by combining an improved ResUnet-19A network. Through few-shot and transfer learning, the resulting model can rapidly adapt to a new survey area, significantly improving prediction accuracy and efficiency while substantially reducing labor costs. The practical application in the Chishui area of the southeastern Sichuan Basin indicates that the proposed technique can effectively overcome the limitations of both conventional and pure AI approaches, offering an efficient and reliable solution for fault identification in hydrocarbon exploration within complex areas.

  • Hai-Ming YANG, Su TANG, Yong-Shan WEI, Li-Wei GUAN, Zhan-Chao PAN
    Geophysical and Geochemical Exploration. 2026, 50(4): 698-706.

    In this study, a modified wild horse optimizer (MWHO) algorithm characterized by a strong evolutionary capability, a faster search speed, and an enhanced optimization ability was introduced into the inversion of Cole-Cole model parameters using the time-domain induced polarization method. The performance of the MWHO algorithm was verified using known models, followed by a comparative study on the derived model parameters. In the case where the time window number and time delay were set at 8 or above and 100~250 ms, respectively, Cole-Cole model parameters with a maximum error of 0.03% were achieved through inversion using the MWHO algorithm. Furthermore, this algorithm exhibited a rapid computation speed and high result stability. Further verification using measured data indicates high consistency among the inverted values of frequency correlation coefficient (c), chargeability (m), and time constant (τ). The inversion results of measured data exhibited low-amplitude frequency correlation coefficient anomalies, high-amplitude chargeability anomalies, and high-amplitude time constant anomalies. These characteristics suggest the presence of metal sulfide ore (mineralized) bodies with a high mineralization degree, high metallic mineral contents, uneven mineralized particles, and high interconnectivity of conductive minerals. Drilling results reveal that siltstones with pyrite alteration occur at depths ranging from 45.08 m to 45.88 m. Disseminated and veinlet pyrite are continuously distributed along fractures. Furthermore, gold mineralization is visible, with gold grade reaching the industrial grade. The inversion results are roughly consistent with the drilling results. Therefore, the MWHO algorithm can be effectively applied to the inversion of Cole-Cole model parameters. Furthermore, this algorithm can distinguish weak induced polarization anomalies, thereby significantly enhancing the resolution of geobodies and highlighting ore-related anomalies. The proposed MWHO algorithm delivers high performance in identifying metal sulfide anomalies, warranting further research and widespread application.

  • Meng-Lin ZHANG, Xiao-Ou LEI, Fan JIANG, Zi-Lu ZHENG, Xin-Hao LEI, Meng WANG, Zhong-Liang WU
    Geophysical and Geochemical Exploration. 2026, 50(4): 707-715.

    The marine controlled-source electromagnetic (MCSEM) system has recorded extensive state data, such as depths, attitudes, and GPS information, during sea trials. Investigating its potential problems will serve as a significant reference for subsequent optimization and improvement. Therefore, by leveraging the advantages of Matlab and Python, and with the aid of new techniques, this study analyzed the recently acquired MCSEM data from sea trials, especially the state data. Besides the utilization of the built-in plotting functions of Matlab, the Robotics Toolbox was employed to simulate the three-axis rotation of underwater towed bodies. The full GPS trajectory playback was enabled by custom functions. The advantageous modules of Python facilitated data visualization, 3D attitude simulation of towed bodies, and single-point playback of navigation survey lines. Given the advanced functions of Python, Python-based data playback applications can provide novel insights for the MCSEM monitoring system. Harnessing the respective strengths of multiple programming languages renders data visualization results more intuitive and information retrieval more convenient, providing a new perspective for system upgrade and optimization.

  • Xi-Rong REN, Wei-Bin LUO
    Geophysical and Geochemical Exploration. 2026, 50(4): 716-723.

    This study investigated methods for the calculation and one-dimensional (1D) inversion of whole-zone apparent resistivity using the AB-Hz ground-airborne electromagnetic frequency sounding method. The purpose is to improve the accuracy and efficiency of electromagnetic frequency sounding and provide technical support for the high-efficiency exploration of deep subsurface resources. The AB-Hz ground-airborne electromagnetic frequency sounding method enables subsurface detection by exciting an electromagnetic field using a ground electric dipole source AB and measuring the vertical component Hz via unmanned aerial vehicle (UAV)-based observations. This study investigated the characteristics of frequency sounding curves of the whole-zone apparent resistivity under different transmitter-receiver distances. Two iterative calculation methods were established for the whole-zone apparent resistivity of the AB-Hz ground-airborne electromagnetic frequency sounding using the analytical expression of the Hz component of the electromagnetic field generated by a horizontal electric dipole (HED) source. Based on the equivalent resistivity principle, the correctness of the two methods was verified by calculating the H- and K-type geoelectric models using the dual-frequency method. To achieve the multi-parameter nonlinear optimization in 1D inversion, this study introduced an improved differential evolution algorithm and proposed a four-step mutation method to enhance the influence of the optimal solution. These efforts contributed to enhanced global optimization performance. Numerical simulation results show that the inversion results were close to the true values of the models, with a high goodness of fit, verifying the effectiveness of the proposed inversion method. The AB-Hz electromagnetic frequency sounding method exhibited pronounced responses to both low- and high-resistivity target geobodies, with larger transmitter-receiver distance corresponding to more distinct responses to targets. The proposed method can provide a technical solution for exploring inaccessible areas, such as deeply incised mountainous areas.

  • Wu-Ri-Lu-Ge LI, Bin XIONG, Yu-Guo LU, Zhi-Feng XU
    Geophysical and Geochemical Exploration. 2026, 50(4): 724-731.

    This study aims to overcome the severe electromagnetic coupling interference in high-power exploration conducted using the time-domain induced polarization (TDIP) method. Specifically, using a three-dimensional finite element method based on Green's function, the forward modeling of direct current resistivity was performed. In combination with an improved Talbot's inverse Laplace transform, the time-varying resistivity of the Cole-Cole model was calculated.Accordingly, a complementary acquisition geometry with a combined source array composed of electric dipoles was constructed. Numerical simulation results indicate that compared to a conventional central gradient array, the combined source array enhanced the electromagnetic coupling suppression effect by 10~20 times. Concurrently, a low-noise observation window was formed at the center of the polarity-reversal layout, significantly increasing the effective signal time range. Notably, the bilateral power supply configuration demonstrated a high resolution for anomalies in typical theoretical models. This study can provide theoretical support for the efficient exploration using the TDIP method under complex geological conditions.