Latest ArticlesCoalfield survey areas are typically characterized by strong near-surface seismic attenuation, strong absorption-induced seismic attenuation in goafs and coal seams, and pronounced seismic anisotropy. These geological characteristics lead to significant amplitude attenuation and phase distortion of seismic waves during their propagation. Ignoring the effects of medium viscosity and anisotropy in seismic migration imaging will lead to weakened amplitudes, distorted seismic events, and dislocation of reflection interfaces, thereby significantly reducing the imaging accuracy of coal seams and goafs. Hence, based on the generalized standard linear solid (GSLS) model and the anisotropic dispersion relationship under acoustic approximation, this study derived a decoupled pure viscoacoustic anisotropic wave equation with an explicit Q expression. This equation allows for the accurate characterization of the propagation characteristics of seismic waves in viscous, anisotropic coal-rock masses while effectively decoupling the amplitude attenuation term from the phase dispersion term. Compared to the coupled quasi-viscoacoustic anisotropic wave equation, the equation derived in this study eliminates the interference from pseudo S-waves and is unaffected by anisotropy parameters. Compared to the conventional constant-Q attenuation model, the proposed equation exhibits high computational efficiency while maintaining simulation accuracy. Based on this equation, this study developed a Q-compensated anisotropy-corrected reverse time migration (RTM) imaging method for survey areas characterized by strong attenuation and anisotropy in seismic coalfield exploration. This method enables accurate restoration of energy loss and the correction of dislocated reflection interfaces in imaging results for survey areas with coal-rock media. Numerical experiments demonstrate that this imaging method exhibits superior resolution and algorithmic stability in the imaging of coal seam structures and goafs, validating its applicability and effectiveness under complex geological conditions of coalfields.
Angle-gather synthesis methods based on Zoeppritz equations that describe seismic reflection at an interface, generally performing convolution-based synthesis using wavelets from a unified source, fail to effectively characterize wavefield propagation, thin-layer tuning effects, and energy transmission losses in complex layered media. To address this issue, this study proposes an angle-gather synthesis method that incorporates the influence of overlying strata. The proposed method employs layer reflection units as basic computational elements and introduces an incident wavelet matrix. In the frequency domain, the proposed method comprehensively incorporates intralayer multiples, converted waves, thin-layer interference, and transmission responses during both downgoing and upgoing seismic wave propagation, ultimately outputting angle gathers directly. The proposed method was validated through forward modeling of various models. The results demonstrate that compared to the angle-gather synthesis method based on the exact Zoeppritz equations, the proposed method can provide a more comprehensive characterization of energy attenuation and complex wavefield during seismic wave propagation. It yields more reliable amplitude responses of deep strata while also maintaining consistent amplitude variation with incident angle (AVA) of PP and PS waves. Overall, this study provides a more robust theoretical and methodological foundation for pre-stack forward modeling, AVA analysis, and reservoir prediction.
Since the transient electromagnetic (TEM) method is susceptible to interference during surveys, denoising is a key step in TEM data processing. For conventional denoising methods, multiple techniques are required to suppress various types of noise, while the performance of these methods depends on manual experience. This study proposes a method for denoising of TEM data using artificial intelligence and deep learning. Specifically, signals bearing noise are input to the self-coding network for denoising, while the denoised data are output after encoding and decoding. Numerical simulation results indicate that the method using deep learning and neural networks enables the effective denoising of TEM data.
In geological surveys, the unmanned aerial vehicle (UAV)-borne time-domain electromagnetic detection system with a flexible pod structure (also referred to as "flexibly connected payload") faces multiple challenges, including unstable attitude, fluctuating altitude, and increased data noise during conventional level flight and terrain-following flight. Based on contour-derived terrain data, this study developed a highest-point algorithm for terrain-following navigation of UAVs with a flexibly connected payload. By introducing constraints on the payload attitude ceiling and the UAV flight ceiling, the proposed algorithm enabled terrain-following navigation of UAVs with a minimum number of waypoints while ensuring flight safety, thereby significantly alleviating the fluctuations of flight systems. Based on this, a matched terrain-following navigation software system was developed, consisting primarily of a geospatial data processing module, a flight route planning module, and a Blender 3D integration module. This software system allows for terrain data import, automatic flight route generation, and 3D visualization. Field tests conducted in the Gandel Mountain area in Wuhai City, Inner Mongolia, demonstrate that the proposed algorithm supported accurate terrain-following flight and enhanced signal quality and subsurface detection capability. This study provides a novel technical approach for mineral exploration and geological hazard monitoring in complex mountainous areas while also extending the application of UAV terrain-following navigation in geophysical exploration.
The Jurassic Yan'an Formation exhibits well-developed coal measure strata. However, there remains a lack of systematic research on the geochemistry, sedimentary environment, coal-forming conditions, and spatial distribution of these coal seams. In this study, 605 coal core samples were systematically collected from the Jurassic Yan'an Formation of the Maiduoshan coal mine in the Ningdong area along the western margin of the Ordos Basin, with 6 655 data points obtained from geochemical tests. The element geochemical characteristics of the coal seams and their implications were analyzed through data validation, element association, and discriminant diagrams. The paleoclimate, paleo-oxygen facies, paleosalinity, paleo-water depth, and paleoproductivity during the deposition of the Yan'an Formation were reconstructed. Accordingly, the paleo-sedimentary environment evolution, coal seam occurrence characteristics, and coal accumulation patterns during this period were revealed. Furthermore, an integrated framework for research on geochemical tracing, sedimentary environment inversion, and analysis of coal accumulation patterns was established for the study area. The results show that the coal samples from the Yan'an Formation exhibited an average index of compositional variability (ICV) of 2.55. This finding indicates that these samples were free from weathering and thus are highly representative. The samples yielded an average chemical index of alteration (CIA) of 71.87%, suggesting that the provenance area underwent moderate chemical weathering, corresponding to a warm and humid climatic setting. Based on these, the paleotemperature and paleo-precipitation of the Yan'an Formation during the deposition of the formation were estimated at approximately 17.76 ℃ and 1 011.14 mm/a, respectively. The high w(Mg)/w(Al) ratios (m), w(Ca)/w(Fe) ratios (n), and w(Sr)/w(Ba) ratios of the coal samples suggest high paleosalinity during the deposition of the Yan'an Formation. The indicators, including the coal ash composition index (K), total sulfur (Sp,d), and w(Th)/w(U) ratio, reveal that the swamp in the Yan'an Formation primarily exhibited a dysoxic, weakly reducing environment. Besides, the swamp showed average [w(Fe) + w(Al)]/[w(Ca) + w(Mg)] and w(Mn)/w(Ti) ratios of 1.55 and 0.23, respectively, indicating a medium-water-level swamp with moderate-degree overlying water. The average w(P)/w(Al) and w(P)/w(Ti) ratios and the net primary paleoproductivity (NPP) were 0.03, 0.7, and 331.53 g/(m²·a), respectively, reflecting a moderately nutrient paleolake environment and high paleoproductivity during the deposition of the Yan'an Formation. Overall, the Jurassic Yan'an Formation in the Ningdong area predominantly features the continental fluvial-deltaic plain sedimentary facies. During its deposition, this formation showed a warm and humid paleoclimate, a coal-forming environment of weakly reducing, medium-water-level swamp, high-salinity water bodies, and high paleoproductivity. These conditions are favorable for the proliferation of coal-forming plants, as well as the accumulation and preservation of plant remains. The findings of this study hold great significance for reconstructing the paleosedimentary framework and paleogeography of the basin and understanding the enrichment patterns of minerals deposited in the basin during the deposition of the Yan'an Formation.
The southern coast of the Laizhou Bay represents a significant distribution area of subsurface brine resources in China, while also emerging as an area with the most representative and serious marine saltwater intrusion in China. In this study, 278 groundwater samples from the Tushan area along the southern coast of the Laizhou Bay were analyzed and tested. Based on the general standards for marine saltwater intrusion, combined with regional drilling data, this study summarized the spatial distribution characteristics of marine saltwater intrusion in the area. The results indicate that subsurface brine in the Tushan area exhibits a chemical type of Cl-Na, originating primarily from seawater. The brine concentration, ranging from 5.0 °Bé to 14.8 °Bé, exhibits a positive correlation with mineral content. The Cl− concentration in subsurface brine ranges from 117.57 mg/L to 83 092.53 mg/L, with the saltwater distribution area reaching up to 137 km2. Three confined brine layers are identified vertically, demonstrating a binary water quality pattern characterized by high and low salinity in the upper and lower parts, respectively. The results indicate that under the influence of continuous brine exploitation, the saltwater intrusion front shows a retreat trend in the Tushan area, with the saltwater distribution area thinking significantly.
The hydraulic fracturing of coal seam roofs faces a technical bottleneck associated with the precise characterization of the coupled evolution of the stress, damage, and seepage fields. To address this challenge, this study proposed a time-lapse cross-hole seismic tomography method. This method integrates high-density downhole three-component geophone arrays with dynamic velocity field reconstruction technology, establishing a dynamic monitoring paradigm characterized by "excitation, high-density acquisition, and repeated time-lapse scanning". It enables high-resolution reconstruction of physical parameters of strata under the fracturing disturbance of hard coal seam roofs. A field test was carried out in the fracturing area of the hard roof above the No. 4 coal seam in a coal mine in northern Shanxi Province. Specifically, a cross-hole array with 24-channel three-component geophones was deployed, and two repeated scans were conducted before and after fracturing. By combining the anisotropy-constrained simultaneous iterative reconstruction technique (SIRT) and the hybrid velocity modeling strategy comprising CT skeleton and attribute details, the vertical imaging resolution was improved to 5 m, and the spatial resolution was better than 2.0 m. The monitoring results show that the P-wave velocities of the fractured target interval decreased by about 100 m/s on average, with negative coherence attribute anomalies and positive root mean square amplitude anomalies identified. These results verify the mechanical responses of fracturing-induced rock breaking and fracture propagation. Cross-validation of 674 high-reliability microseismic events reveals that the deviation between the dominant strikes of the low-velocity anomalies and the microseismic event cloud was merely 2°, the volumetric intersection over union (IoU) reached up to 0.71 (95% confidence interval: 0.63~0.79), and the Hausdorff distance was determined at 18 m. These results collectively confirm the reliability of the proposed method in evaluating fracturing performance and delineating stimulated reservoir volumes (SRVs). This study overcomes the limitations inherent in existing monitoring techniques for characterization of the stress-structure-function multi-scale coupling, providing a novel technical approach for dynamic monitoring of hydraulic fracturing of hard coal mine roofs.
To address the demand for in situ tests of the low-frequency dynamic stiffness and frequency-dependent behaviors of a shallow foundation, this study introduced a method that integrates controlled-source continuous frequency-sweep with vertical velocity admittance. Specifically, vertical frequency-sweep tests were carried out within the frequency range of 10~110 Hz on a manually compacted foundation and an undisturbed soil foundation. The excitation force was back-calculated based on the accelerations of the hammer and vibrator baseplate, and the dynamic stiffness was estimated based on the vertical velocity admittance of frequencies below 20 Hz. Frequency-sweep tests were repeated three times for each foundation under initial frequencies of 10 Hz, 20 Hz, 40 Hz, and 60 Hz. The admittance curves agreed well over the swept frequency range, and variations in dynamic stiffness within the 10‒20 Hz frequency band were captured for both foundations. The results indicate that the dynamic stiffness decreased with increasing frequency for both foundations, with a greater amplitude observed in the manually compacted foundation. The proposed method can provide the equivalent dynamic stiffness of foundations under low-frequency vibration, thereby enabling the comparative assessment of the dynamics of foundations treated in different ways. Meanwhile, this method also offers a technical pathway for assessing the dynamic parameters of foundations under small strains.
Fourier methods have found wide application in seismic wavefield continuation due to their high computational efficiency. However, these methods are insufficient to deal with media with lateral velocity variations. In contrast, the split-step Fourier, Fourier finite-difference, and generalized-screen migration can significantly improve the accuracy of wavefield simulation and imaging by combining the continuation in the frequency-wavenumber and spatial domains. By inheriting the high computational efficiency of Fourier methods, the one-way wave migration imaging method further optimizes the algorithm design and numerical implementation. This method significantly enhances the adaptability and imaging quality of complex media, suggesting significant application value. This study systematically reviews the fundamental principles and research status of one-way wave migration imaging, summarizes its research progress from six perspectives, and proseses its development trends. The purpose is to provide a reference for further research and application of seismic imaging technology.
The Xinlong-Langmeila ore district, located in the middle segment of the central Lhasa Terrane in Tibet, holds considerable potential for mineralization. However, the extension of deep ore bodies and fault zones in the ore district remains poorly understood, posing a challenge to subsequent ore prospecting. This study aims to ascertain the strikes of ore bodies, as well as the distributions of deep faults and concealed deposits. Given that the galena-gersdorffite-gold and pyrite-gold-quartz assemblages predominate in the ore district, this study performed an integrated geophysical exploration by combining induced polarization (IP) central gradient array survey, IP sounding, and audio-frequency magnetotellurics (AMT). In combination with drilling and geological data, this study determined the locations and strikes of ore bodies, delineated IP anomalies and favorable prospecting targets, and identified ore-controlling fault structures. The results of this study demonstrate that integrated geophysical exploration is feasible for gold deposit exploration while also providing a valuable reference for ore prospecting under similar geological conditions. geological conditions.