Latest ArticlesThe western Henan hosted large-scale diasporic karst bauxite deposits in the Late Carboniferous formations, characterized by abundant rare, dispersed, and rare earth elements, along with high abundances of lithium and niobium-tantalum. Focusing on six bauxite deposits in western Henan, this paper, based on their robust geological data, examines the correlations of lithium and niobium-tantalum with the primary chemical components of ores. Meanwhile, using X-ray diffraction (XRD) and scanning electron microscopy (SEM) methods, it investigated the distribution and enrichment mechanisms of lithium and niobium-tantalum in aluminum-bearing rock series. The results show that lithium and niobium-tantalum exhibited positive correlations with the primary chemical components in bauxites and roof clay rocks, with significantly different correlations observed in the floor ferrous clay rocks. This implies the complexity of provenances of the aluminum-bearing rock formations. In addition, in the roof clay rocks, bauxites, and floor ferrous clay rocks, the content of lithium was positively correlated with that of niobium-tantalum. This demonstrates that they share substantially identical enrichment mechanisms during deposition and the same or overlapping ore-forming provenances. This study demonstrates the possibility of associated lithium and niobium-tantalum in the study area evolving into industrial deposits, filling the gap in research on their enrichment mechanisms in the aluminum-bearing rock series, western Henan. The study area holds significant potential for lithium and niobium-tantalum resources, which will bring enormous economic benefits. Therefore, further mineral exploration should be carried out here.
The Jinqiu gas field in the Sichuan Basin boasts abundant tight gas resources. However, the application of seismic steering technology for horizontal wells faces significant challenges associated with the following geological factors. Specifically, influenced by multistage tectonic movements, the Jurassic Shaximiao Formation exhibits widespread normal faults. Notably, the main target No. 6 and No. 8 channel sand bodies are characterized by vertical stacking, horizontal overlapping, rapid thickness variations, thin mudstone interbeds, and strong reservoir heterogeneity. Therefore, this study established a seismic steering technology system to guide tracking-while-drilling in horizontal wells of tight gas. According to different geological requirements, this study formulated seismic steering techniques corresponding to target entry and horizontal drilling based on high-confidence seismic data. First, based on regional velocity, a high-precision time-depth conversion was achieved using the dynamically calibrated velocity of pilot and drilling horizontal wells. This is then supplemented with geostatistical inversion to improve seismic resolution for guiding target entry. Afterwards, building upon regional results and integrating information from drilled pilot and horizontal wells, a series of techniques were employed to guide horizontal section drilling. These techniques include the dynamic anisotropic prestack depth migration coupled with processing-interpretation integration, dynamic geostatistical inversion, and prestack simultaneous inversion to predict formation attitudes, sand bodies, and gas-bearing sweet spots. The practice demonstrates the effectiveness of seismic steering technology in ensuring precise target entry and increasing the drilling rate of sand bodies and sweet spots, thus providing a reliable technical foundation for efficient development of tight gas.
The Fuyu oil layer, located in the southern Daqing Placanticline within northern Songliao Basin, contains well-developed sandstone reservoirs, holding significant potential for increasing the reserves and productivity of the Daqing Oilfield. These reservoirs are characterized by porosity ranging from 9.0% to 13.6% and permeability between 0.1 mD and 3.21 mD, representing tight sandstone reservoirs. Their development requires horizontal wells and large-scale volume fracturing, thus placing high requirements on the accuracy of sand body prediction. These reservoirs are primarily concentrated in the Fuyu I and II oil formations, deposited predominantly in a deltaic plain subfacies. In these formations, the sand bodies are characterized by frequent lateral variations, small single-layer thickness, and a staggering and overlapping vertical distribution pattern. These characteristics result in complex seismic responses, posing great challenges to reservoir prediction. In view of the sedimentary characteristics of tight sandstone reservoirs in the Fuyu oil layer, this study employed development-scale seismic sedimentology for sand body prediction. Specifically, through seismic forward modeling based on well parameters, the seismic responses of thin tight sandstones were identified, followed by the integrated application of automated optimization of stratal slices and planar quantitative prediction of sandstone thickness. The results reveal a positive correlation between seismic amplitude and the thickness of sub-layer sandstones in the Fuyu oil layer, southern Daqing Placanticline. The development-scale seismic sedimentology technology quantitatively characterizes the planar distribution of sub-layer sand bodies, strongly supporting the successful well placement and implementation in the horizontal well pilot area. The success in the trial development of tight oil via horizontal wells in the Fuyu oil layer, Block M2, southern Daqing Placanticline, sets an example for tight oil development in the northern Songliao Basin. Therefore, the development-scale seismic sedimentology for sandstone prediction shall be given a high priority in the subsequent horizontal well design and implementation. This ensures a high penetration rate of sandstones and oil layers and provides technical support for developing tight oil resources in the Fuyu oil layer.
The Ankang area in southern Shaanxi Province holds favorable geological conditions for shale gas accumulation and shale gas resource potential. However, multistage tectonic processes have somewhat destroyed shale reservoirs. Pinpointing local favorable zones for shale gas accumulation has become a key issue for shale gas exploration in the Ankang area. Therefore, this study investigated the lower Cambrian Niutitang and Lujiaping formations in the Ankang area using the wide-field electromagnetic (WFEM) method. Through integrated information modeling and inversion imaging, this study determined the electrical structures of strata, fault structures, and the distributions of the bottom boundaries of the target layers in the study area. Moreover, combined with the organic geochemical characteristics of shales, this study identified the favorable and prospect zones for shale gas exploration. The results of this study provide significant guidance for further shale gas exploration in the Ankang area and a reference for other similar geophysical exploration of shale gas in China.
The development of thin sand bodies (thickness: 4~6 m) in H3 reservoir, the Huoshaoshan Oilfield, Junggar Basin, faces vertical and horizontal prediction challenges. Given this, this paper proposed a technology that combines spectrum bluing for frequency broadening with dominant frequency band fusion of multi-source inversion data. Based on the blue spectrum of logging-derived reflection coefficient, the proposed technology expanded the pre-stack seismic high-frequency band to 120 Hz through well-seismic modeling. By doing so, it can enhance reservoir responses above 60 Hz and suppress low-frequency noises. The frequency-specific processing was then conducted for the three types of data volumes. Specifically, the low-frequency model (0~8 Hz) retained the structural trend, while the intermediate-frequency pre-stack waveform indicator inversion VP/VS volume (8~60 Hz) depicts the lithological boundary. The high-frequency pre-stack geostatistical inversion VP/VS volume (60~120 Hz) captures details of thin sand bodies. The adaptive weighting allocation achieved full-band synergistic integration, overcoming the identification limitations (8‒10 m seismic tuning thickness) of traditional inversion methods. The application of this technology shows that the fused data volumes can clearly identify thin sand bodies (4 m), with the lateral inter-well connectivity error reduced by 25% compared to conventional inversion methods. This technology established a multi-scale collaborative model of "trend controlling in low-frequency bands, boundary controlling in intermediate-frequency bands, and detail capturing in high-frequency bands", breaking through the bottleneck of multi-solutions from single-source inversion. The information fusion of full-frequency bands provides a replicable technical path for the detailed assessment of continental clastic reservoirs with thin interbeds. It also offers methodological inspirations for the development of similar complex reservoirs.
The compensated neutron log (CNL) characterizes porosity by measuring hydrogen index (HI). However, its accuracy is not high due to the rock hydrogen content is not completely distributed in the pore fluid and fluid's types are complex. This study aims to determine the main reason for the difference between the measured HI and the formation porosity, thereby deepening the understanding of formation. Using Monte Carlo numerical simulation, multiple factors involved in the HI measurement are analyzed. First, the relationship between the HI and the near-to-far ratio of thermal neutron counting is obtained according to the calibration response of the compensated neutron tool in water-bearing limestone. Second, various factors that cause the difference between HI and formation porosity are obtained on the basis of a comprehensive analysis. The results show that lithology, mineral composition, clay, fluid state, formation water salinity will affect the measurement of HI and make it different from formation porosity. Particularly, high density, high shale content, gas content, and high salinity are the main factors affecting the HI measurement. Overall, this study provides a reference for determining formation porosity and identifying oil and gas through neutron data in the future.
Inductively coupled plasma mass spectrometry (ICP-MS), representing one of the most widely used techniques for measuring trace elements in biological samples, has been extensively applied in research on mercury determination. The mercury content in biological samples is generally low, and its determination by ICP-MS is susceptible to tungsten oxides. Consequently, selecting ICP-MS operating parameters directly affects the determination sensitivity, the degree of oxide interference, and, by extension, the quality of analysis results. This study conducted optimization experiments on key ICP-MS operating parameters, including RF power, nebulizer flow, auxiliary flow, sampling depth, and helium flow. Taking the mercury sensitivity and the productivity of tungsten oxides as the main reference indicators, the optimized parameters were determined as follows: RF power of 1 500 W, nebulizer flow of 1.00 L/min, auxiliary flow of 0.7 L/min, sampling depth of 5 mm, and helium flow of 5 mL/min. Comparative analysis revealed that the nebulizer and helium flow had the most significant influence on the analysis results. Based on the determined optimal operating parameters, the method detection limit for mercury was determined to be 0.50×10-9. The results were consistent with the results verified by several certified reference materials for the biological composition, with the relative standard deviation (RSD, n=10) ranging from 1.03% to 3.14%. This confirms the robustness of the optimized parameters and the applicability of the proposed method in laboratory analysis.
With the increasing demand for groundwater detection accuracy in foundation pit engineering, the direct current resistivity (DCR) method has attracted widespread attention for its application potential in groundwater detection. This study investigated the application potential of the DCR method through numerical simulations. A two-layer structure model was constructed to analyze the impacts of the groundwater level depth on electrode response and the relationship between the number of electrodes and the detection range. The results indicate that a significant exponential relationship was observed between the extreme voltage values obtained from electrode detection and the groundwater level depth, demonstrating the potential of the DCR method in detecting the groundwater level depth. However, the increasing groundwater level depth led to intensified signal attenuation and noise interference, limiting the detection depth of the DCR method. Additionally, simply increasing the number of electrodes could not broaden the detection range effectively. Instead, it is necessary to enhance the imaging capability of the DCR method by changing the electric field distribution. Overall, this study provides a theoretical basis for the application of the DCR method in groundwater detection while presenting the challenges in practical applications.
The exploration areas in western piedmont zones have emerged as an important strategic replacement area for hydrocarbon exploration. However, the complex topography and structure ("dual-complexity"), along with the seismic data with low signal-to-noise ratios (SNR), severely restricted the accuracy of seismic imaging and the success rate of drilling. Therefore, it is imperative to optimize inversion technologies. This study focused on the western piedmont zone, an area characterized by complex surface geology, including hills, gravelly zones, and yardang landforms, further degrading the quality of seismic data. The existing first-arrival waveform inversion technique relies on first-arrival traveltime fitting. However, due to the near-surface heterogeneity in the western piedmont zones, this technique faces two core limitations: insufficient wavelet consistency and insufficient surface consistency. This results in inadequate accuracy of shallow velocity modeling and makes it difficult to invert the velocities of intermediate-to-deep layers using ultra-large-offset seismic data and the abundant low-frequency information contained in first-arrival waves. In contrast, reflection waveform inversion (RWI) exhibits higher adaptability to low-quality data by exploiting information of intermediate-to-deep layers in reflected waves and optimizing the objective functions accordingly. Based on this, this paper applied RWI to the survey area, aiming to enhance the accuracy of migration velocity inversion under dual-complexity conditions and to provide technical reference for improving seismic imaging quality and the detailed depiction of hydrocarbon reservoirs in western piedmont zones. Model and field tests demonstrate that the RWI can handle low-quality data in piedmont zones and improve the overall accuracy of velocities in intermediate-to-deep layers.
Fractures serve as important seepage channels and storage spaces for hydrocarbon reservoirs. Therefore, the precise prediction of their distribution characteristics (density and orientation) holds critical significance for hydrocarbon exploration and development. However, existing fracture prediction methods using post-stack seismic data (such as coherence and curvature) cannot effectively extract azimuthal differences, thus failing to meet the demand for high-precision fracture prediction. Given this, this paper proposed a fracture prediction method by performing ellipse fitting on azimuthal attribute differences of post-stack seismic data. Specifically, the original data were optimized using structure-oriented filtering, from which three or more characteristic azimuth angles were further selected to extract azimuthal attributes. Then, the extracted attributes were analyzed using ellipse fitting to quantify attribute anisotropy. Ultimately, the fracture density and orientation were inverted using ellipse parameters (the ellipticity and major/minor axis directions). The practical application of this method in an oil field demonstrates a high coincidence between the predicted fracture density and direction and the actual drilling data, achieving superior accuracy compared to conventional fracture prediction methods. This method provides a high-precision fracture prediction solution for areas lacking wide-azimuth pre-stack seismic data.