Home Most Read
Most Read
  • Qin-Lin YANG
    Geophysical and Geochemical Exploration. 2026, 50(5): 926-932. doi:10.11720/wtyht.2026.0120

    Channel sandstones exhibit distinct azimuthal anisotropy, enabling anisotropic inversion to more accurately characterize and predict channel sand bodies. However, direct inversion frequently yields unstable results due to an excessive number of parameters to be inverted. In this study, the anisotropic characteristics of channel sand bodies were first determined based on logging data. Comparison of various amplitude variation with offset (AVO) approximate equations demonstrates that the three-term Rűger equation outperformed others. To address the instability of anisotropic inversion, this study proposed a two-step inversion strategy based on wide-azimuth, high-density seismic data. Specifically, the gradient terms of various azimuth sectors were first derived through sector-specific inversion. The relative values of elastic parameters were then calculated using robust linear inversion algorithms. Finally, the absolute values of elastic parameters were determined through machine learning-based high-resolution fusion. The distribution of thin channel sandstone reservoirs predicted by combining petrophysical analysis agreed well with log data and geological understanding. The results of this study can serve as a guide for the prediction and anisotropic inversion of thin channel sandstone reservoirs in similar areas.

  • Cao LI, Chun-Sheng YANG, Zong-Bao LIU, Guo-Song CHEN, Hong-Bo SHI
    Geophysical and Geochemical Exploration. 2026, 50(1): 43-52. doi:10.11720/wtyht.2026.1337

    The Fuyu oil layer, located in the southern Daqing Placanticline within northern Songliao Basin, contains well-developed sandstone reservoirs, holding significant potential for increasing the reserves and productivity of the Daqing Oilfield. These reservoirs are characterized by porosity ranging from 9.0% to 13.6% and permeability between 0.1 mD and 3.21 mD, representing tight sandstone reservoirs. Their development requires horizontal wells and large-scale volume fracturing, thus placing high requirements on the accuracy of sand body prediction. These reservoirs are primarily concentrated in the Fuyu I and II oil formations, deposited predominantly in a deltaic plain subfacies. In these formations, the sand bodies are characterized by frequent lateral variations, small single-layer thickness, and a staggering and overlapping vertical distribution pattern. These characteristics result in complex seismic responses, posing great challenges to reservoir prediction. In view of the sedimentary characteristics of tight sandstone reservoirs in the Fuyu oil layer, this study employed development-scale seismic sedimentology for sand body prediction. Specifically, through seismic forward modeling based on well parameters, the seismic responses of thin tight sandstones were identified, followed by the integrated application of automated optimization of stratal slices and planar quantitative prediction of sandstone thickness. The results reveal a positive correlation between seismic amplitude and the thickness of sub-layer sandstones in the Fuyu oil layer, southern Daqing Placanticline. The development-scale seismic sedimentology technology quantitatively characterizes the planar distribution of sub-layer sand bodies, strongly supporting the successful well placement and implementation in the horizontal well pilot area. The success in the trial development of tight oil via horizontal wells in the Fuyu oil layer, Block M2, southern Daqing Placanticline, sets an example for tight oil development in the northern Songliao Basin. Therefore, the development-scale seismic sedimentology for sandstone prediction shall be given a high priority in the subsequent horizontal well design and implementation. This ensures a high penetration rate of sandstones and oil layers and provides technical support for developing tight oil resources in the Fuyu oil layer.

  • Shu-Jin YUAN
    Geophysical and Geochemical Exploration. 2026, 50(5): 903-911. doi:10.11720/wtyht.2026.0072

    In hydrocarbon exploration and exploitation, reservoir thickness represents a fundamental parameter for reservoir characterization and serves as a direct determinant of both the material foundation and developmental potential of hydrocarbon reservoirs. Therefore, this parameter is vital for the exploration and exploitation of these reservoirs. In recent years, geophysical technicians have developed a variety of pre-stack and post-stack seismic techniques for reservoir thickness prediction. However, these techniques, despite significantly improving the prediction accuracy, suffer from specific application limitations. Given the limited exploratory wells during early-stage hydrocarbon exploration and exploitation, this study investigated the seismic response characteristics of the reservoir model based on the classical Widess wedge. Accordingly, two reservoir parameters were introduced: band-limited wave impedance and seismic net-to-gross ratio, and their functional relationship was determined. Then, a three-step technique for reservoir thickness prediction was developed based on band-limited wave impedance. The tuning effects of seismic wavelets were eliminated using a detuning correction factor for wavelet amplitude, significantly enhancing the prediction accuracy of the proposed technique. The proposed technique reduces the significant prediction errors inherent in conventional seismic amplitude-based methods when the reservoir thickness exceeds one-fourth of the dominant wavelength. Meanwhile, it enhances prediction accuracy for thin reservoirs with thicknesses of less than one-eighth of the dominant wavelength. Therefore, this technique holds great application potential for sandstone reservoirs formed under stable geological deposition. Furthermore, it can improve the success rate of encountering sand bodies during drilling in deep-water turbidite sandstone reservoirs and enhance the geological modeling precision of reservoirs. This technique has delivered excellent performance in application to the exploration and exploitation of deep-water turbidite reservoirs in the Lower Congo Basin.

  • Fen-Xuan ZHANG, Jun-jie XUE, Jiang-Wei CUI, Yao GU
    Geophysical and Geochemical Exploration. 2026, 50(5): 956-962. doi:10.11720/wtyht.2026.1198

    Since the transient electromagnetic (TEM) method is susceptible to interference during surveys, denoising is a key step in TEM data processing. For conventional denoising methods, multiple techniques are required to suppress various types of noise, while the performance of these methods depends on manual experience. This study proposes a method for denoising of TEM data using artificial intelligence and deep learning. Specifically, signals bearing noise are input to the self-coding network for denoising, while the denoised data are output after encoding and decoding. Numerical simulation results indicate that the method using deep learning and neural networks enables the effective denoising of TEM data.

  • Kai HUANG, Guan-Hai NONG, Yao-Hui DENG, Mao LU
    Geophysical and Geochemical Exploration. 2026, 50(5): 846-855. doi:10.11720/wtyht.2026.1299

    The northeastern Yunnan - northwestern Guizhou region represents a significant lead-zinc polymetallic mineral province in China, where multiple large and super-large lead-zinc polymetallic deposits have been discovered, demonstrating considerable potential for deep mineral prospecting. However, deep mineral prospecting faces challenges, such as high costs, significant risks, and technical difficulties. Hence, by integrating the geological-geophysical-geochemical exploration data, this study conducted implicit 3D modeling of a deposit in the northwestern Guizhou region, followed by deep mineralization prediction of this deposit. The specific methodology is as follows. First, the 3D resistivity and polarizability models are generated through geophysical inversion and spatial interpolation of the audio-frequency magnetotelluric (AMT) and induced polarization (IP) sounding data. Second, based on borehole data and mineralization-related geological characteristics, a stratigraphic model is established using the K-means clustering algorithm in machine learning; a fault model is developed by integrating surface fault occurrences and AMT interpretations. Third, based on the resistivity, stratigraphic, and fault models, 3D mineralization prediction is conducted using the mineralization condition analysis method. Finally, the deep mineral prospecting targets can be delineated to guide the deep borehole arrangement. Drilling verification confirms the high reliability of the targets delineated using the above methodology. Overall, the implicit 3D modeling based on the geological-geophysical-geochemical exploration data can effectively predict unknown areas using known information. This approach provides sufficient samples for implicit 3D modeling, thereby assisting in constructing more accurate geological models under available conditions and providing a reference for mineral exploration in covered areas and in deep and marginal zones of old mines.

  • Qi WU, Xing-Hai LANG, Chang-Yi WU, Yu-Lin DENG, Hong-Shan ZHENG, Chen LI, Zuo-Peng XIANG, Hong-Yu ZHAN, De-Xin FENG, Bai-Qing GUO, Zhao-Shuai WANG
    Geophysical and Geochemical Exploration. 2026, 50(5): 823-835. doi:10.11720/wtyht.2026.1419

    The Longsang mining area in Tibet, located in the eastern section of the Gangdese metallogenic belt, boasts favorable geological settings and conditions for mineralization. To guide mineral exploration and prospecting in the mining area, this study investigated the anomalous characteristics of 13 elements (e.g., Cu, Mo, Au, Ag, Pb, and Zn) in the 1∶10000 soil geochemical survey results using exploratory data analysis (EDA). The results of this study indicate that the primary ore-forming elements, Cu and Mo, in the mining area show strong enrichment and considerable variation, suggesting great metallogenic potential and promising prospects for ore exploration. Based on the soil geochemical integrated anomalies, two anomaly zones were delineated: J1 and J2. The J1 anomaly zone is distributed in the west-central part of the mining area, displaying a large scale and a high degree of overlap between Cu and Mo anomalies. In contrast, the J2 anomaly zone is located in the south-central part of the mining area. In this zone, Cu predominates among anomalous elements, while Mo anomalies are nonsignificant. Engineering verification was carried out for the two anomaly zones. Drilling engineering preliminarily revealed the presence of deep Cu-Mo ore bodies in the J1 anomaly zone. It is proposed that the deep part of the area along the dip direction of the ore body in the northwestern part of the J1 anomaly zone and the NE-SW strike of the ore body are key prospecting targets in the Longsang mining area. The results of this study provide a scientific basis for further prospecting arrangement in the mining area.

  • Tian LIANG, Cheng-Yu SUN, Hong-Yu HUANG
    Geophysical and Geochemical Exploration. 2026, 50(2): 355-365. doi:10.11720/wtyht.2026.1376

    Scholte waves serve as surface waves propagating at a fluid-solid interface, carrying abundant seabed information. They exhibit dispersion during propagation, which is primarily controlled by the parameters of both seawater and seabed. To investigate the influence of different marine environments on Scholte waves, this study first derived the equation expressing their dispersion characteristics based on a layered seabed model. Then, using the staggered-grid finite-difference (SGFD) method, it conducted forward modeling on several typical marine models. The dispersion characteristics of the theoretical Scholte wavefields were analyzed using the cross-correlation and phase-shifting (CCPS) method. The analysis results show that the dispersion characteristics of Scholte waves weakened with increased seawater depth. In addition, Scholte waves are highly sensitive to changes in the S-wave velocity of the medium that, in turn, exert a significant impact on the dispersion characteristics of Scholte waves. In the case of decreased S-wave velocity of the solid medium layers, the Scholte waves exhibited stronger dispersion, accompanied by significant changes in both energy and dispersion curves.

  • Zhi-Wei MIAO
    Geophysical and Geochemical Exploration. 2026, 50(4): 673-683. doi:10.11720/wtyht.2026.0025

    The tight sandstone reservoirs of the braided river delta facies in the Xujiahe Formation of the Sichuan Basin represent a critical target for the reserve growth and production addition of hydrocarbons. In the TJ area, the Xujiahe Formation exhibits deep burial depths, complex lithologies, unconfirmed petrophysical patterns of dominant lithofacies, and rapid lateral variations in reservoirs, which jointly limit the reservoir prediction accuracy. This study aims to address the challenges in reservoir prediction. First, considering the impacts of multi-mineral components, a generalized Xu-White petrophysical model was developed to accurately determine the factors for lithologic and reservoir identification. Then, using a reflectivity objective function with time-offset dual constraints developed in this study, the amplitude versus offset (AVO) reflectivity extraction method was improved, contributing to the acquisition of accurate ternary reflectivity volumes. Accordingly, high-resolution prestack elastic parameter volumes were determined through Bayesian inversion. Finally, the distribution of sandstone reservoirs was predicted thoroughly by combining factors for lithologic and reservoir identification, as well as high-resolution prestack inversion results. The improved AVO reflectivity inversion accurately predicted the distribution of sandstones and reservoirs in the TJ area, delivering satisfactory performance in predicting highly heterogeneous tight sandstone reservoirs. This study provides a novel approach to prestack prediction of tight sandstone reservoirs.

  • Long-Ke YI, Bo YANG, Guan-Chao LI, Xiao-Ming LIN, Ying HU
    Geophysical and Geochemical Exploration. 2026, 50(3): 567-579. doi:10.11720/wtyht.2026.0009

    By integrating multi-source radioactivity survey data and using Geodetector, this study explored the spatial variations of the gamma radiation field at the ground-air interface and their influence mechanisms in the Pearl River Delta economic zone. The results indicate that key factors influencing the distribution of the radiation field include soil radon concentration (q=0.852), 238U content (q= 0.816), and 232Th content (q=0.803). Besides, formation lithology (q=0.791), fault structures (q=0.786), and chronostratigraphy (q =0.778) also play a significant role. The interaction detection indicates that the synergy of soil radon concentration and fault structures demonstrates the strongest explanatory power (q=0.875), suggesting the mechanism of structure-controlled transport and soil-controlled accumulation. Risk detection demonstrates that high-radiation radon contributors include normal faults, magmatic rocks, and Jurassic strata. The results of this study reveal that the spatial distribution of the radiation field is governed by a three-level system comprising nuclide content as a direct source, lithology and chronostratigraphy as carriers, and fault structures as pathways for radon transport.The research results have provided a scientific basis for regional radiation environmental risk assessment and pollution prevention and control.

  • Zhuo-Lu WANG, Shu-Chen YU
    Geophysical and Geochemical Exploration. 2026, 50(1): 169-179. doi:10.11720/wtyht.2026.1373

    Heavy metal pollution in the Qingshuitang old industrial area in Hunan province poses a high risk to human health. To investigate the migration and enrichment characteristics of heavy metals in the food chain of historical industrial and mining wastelands, this study collected 128 food chain samples comprising 16 groups corresponding to different populations. The contents of four heavy metals, including cadmium (Cd), mercury (Hg), lead (Pb), and arsenic (As), were tested in samples such as paddy soil, vegetable soil, rice, vegetables, drinking water, along with human urine and blood. Then, the migration and enrichment characteristics of heavy metals in the "soil-crop-human" food chain were investigated using the pollution index, Nemerow composite pollution index, and Pearson correlation analysis. The results show that the paddy and vegetable soils both exhibited heavy Cd pollution, heavy to moderate Pb pollution, moderate to mild As pollution, and mild Hg pollution. Overall, the paddy soil presented higher comprehensive pollution levels than the vegetable soil. Moreover, the rice displayed heavy pollution in Cd, Pb, and Hg and mild As pollution. In contrast, vegetables presented severe Cd pollution and mild pollution in Hg and As, with no Pb pollution observed. Generally, the comprehensive pollution level of rice was higher than that of vegetables. In addition, humans showed exceedances of standard limits for key biomarkers: Cd in urine (2.73 times), Cd in blood (1.73 times), and Pb in blood (2.73 times). In contrast, the As in blood and Hg in urine were generally below the clinical diagnostic limits. Significant correlations were determined between the Cd, Hg, Pb, and As contents in the "soil-crop (rice and vegetables)" and the migration and enrichment of Cd in the "crop (rice and vegetables)-human urine". However, the enrichment of Cd and Pb in human blood followed other migration pathways. No clear enrichment patterns of As and Hg were observed in the "crop (rice and vegetables)-human" transfer, indicating occasional occupational poisoning. These findings will provide a valuable reference for mitigating heavy metal pollution in industrial and mining wastelands and preventing and controlling associated human health risks.