收藏切换
Preparation and Properties of Sintered Permeable Brick Made from Copper Tailings and Mine Waste Rock
收藏切换
PDF
An Li, Yang Gao, Jin Yu, Yu Tu, Bingrong Li, Quanyong Wang
Copper Engineering | 2026, (4) : 41 - 48
Less
收藏切换
Copper Engineering | 2026, (4): 41-48
Special Topic: Utilization of Mining and Metallurgical Solid Waste and Pollution Control
Preparation and Properties of Sintered Permeable Brick Made from Copper Tailings and Mine Waste Rock
Full
An Li, Yang Gao, Jin Yu, Yu Tu, Bingrong Li, Quanyong Wang
Affiliations
  • Jiangxi Copper Technology Institute Co.,Ltd.,Nanchang 330001,China
Published: 2026-08-28 doi: 10.3969/j.issn.1009-3842.2026.04.005
Outline
收藏切换

To explore new pathways for utilization of copper tailings and mine waste rocks, these two materials were selected as raw materials to prepare sintered permeable brick. X-ray diffraction (XRD) and X-ray fluorescence spectrometry (XRF) techniques were employed to analyze mineral phase structure and chemical composition of tailings and waste rocks. Sintering mechanism was then analyzed. Compression molding method, with waste rocks as aggregates, was chosen to prepare sintered permeable bricks with a high content of tailings. An in-depth exploration was conducted on the effects of four factors, namely firing temperature, holding time, particle size of waste rocks, and content of tailings, on comprehensive performance of the brick. Ideal combination of the factors required further enhancement of mechanical strength while ensuring permeability performance of the brick, achieving a balance between strength and permeability of the brick. Research results indicated that the optimal process parameters were a firing temperature of 1 180 ℃, a holding time of 80 min, a particle size of waste rocks ranging from 2.00 to 3.35 mm (6~10 mesh), and a tailings content of 60%. Permeable brick prepared under this process exhibited a flexural strength of 4.23 MPa and a permeability coefficient of 10.1×10−2 cm/s, both of which complied with requirements of the national standard GB/T 25993—2023 "permeable paving bricks and permeable paving flags".

tailing  /  waste rock  /  sintered permeable brick  /  intensity  /  permeability coefficient
An Li, Yang Gao, Jin Yu, Yu Tu, Bingrong Li, Quanyong Wang. Preparation and Properties of Sintered Permeable Brick Made from Copper Tailings and Mine Waste Rock[J]. Copper Engineering, 2026 , (4) : 41 -48 . DOI: 10.3969/j.issn.1009-3842.2026.04.005
Year 2026 volume Issue 4
PDF
38
11
Cite this Article
BibTeX
Article Info
doi: 10.3969/j.issn.1009-3842.2026.04.005
  • Receive Date:2025-10-17
  • Online Date:2026-09-08
  • Published:2026-08-28
Article Data
Affiliations
History
  • Received:2025-10-17
  • Revised:2026-01-05
Funding
Affiliations
    Jiangxi Copper Technology Institute Co.,Ltd.,Nanchang 330001,China
References
Share
https://castjournals.cast.org.cn/joweb/tygc/EN/10.3969/j.issn.1009-3842.2026.04.005
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT