收藏切换
Construction and Optimization of Corncob Fermentation Process Using Composite Microbial Inoculum
收藏切换
Wen-yan CHEN1, Rui ZHOU1, 2, Hui-hao WU1, Yao-dong LI1, Jie YANG1, Rong-xin ZANG1, *, Hong-wei XU1, *
Biotechnology Bulletin | 2026, 42(10) : 37 - 46
Less
收藏切换
Biotechnology Bulletin | 2026, 42(10): 37-46
Construction and Optimization of Corncob Fermentation Process Using Composite Microbial Inoculum
Full
Wen-yan CHEN1, Rui ZHOU1, 2, Hui-hao WU1, Yao-dong LI1, Jie YANG1, Rong-xin ZANG1, *, Hong-wei XU1, *
Affiliations
  • 1School of Life Science and Engineering, Northwest Minzu University, Lanzhou 730100
  • 2Green Animal Husbandry Center, Lanzhou 730030
Published: 2026-10-26 doi: 10.13560/j.cnki.biotech.bull.1985.2025-1369
Outline
收藏切换
Objective

High-lignin straw exhibits low feed utilization efficiency due to its high content of acid detergent lignin (ADL). We developed a composite fermentation process using white-rot fungus, Bacillus subtilis, and Pichia pastoris, and evaluated its synergistic degradation effect in corncob.

Method

We constructed a three-strain composite fermentation system consisting of white-rot fungus BF-1 (isolated from Lentinula edodes) as the core functional strain, together with Bacillus subtilis and Pichia pastoris at a cell mass ratio of 1∶1∶1. Corncob served as the fermentation substrate, and single-strain fermentation of BF-1 was used as the control. The degradation efficiency of ADL was compared using single-factor experiments (temperature: 28–32 ℃, moisture content: 40%–50%, inoculum size: 1%–5%). Response surface methodology was then employed to optimize the fermentation conditions for the three-strain system. Morphological changes in corncobs were examined by scanning electron microscopy (SEM). Crude protein (CP), neutral detergent fiber (NDF), and acid detergent fiber (ADF) were measured to evaluate the relative feed value (RFV) and relative feed quality (RFQ).

Result

Single-factor experiments showed that both fermentation systems achieved optimal ADL degradation at 30 ℃, 45% moisture content, and 3% inoculum size. Under these conditions, the ADL degradation rate of single-strain fermentation was 42.29%, while that of the three-strain fermentation was 58.83%. The degradation efficiency of the three-strain system was significantly higher than that of the single-strain system (P<0.01). Response surface methodology identified the optimal conditions for three-strain fermentation as 29.8 ℃, 45.2% moisture, and 3.1% inoculum, achieving an ADL degradation rate of 63.42%. During fermentation, the activities of laccase (Lac), manganese peroxidase (MnP), and lignin peroxidase (LiP) increased continuously over time. Scanning electron microscopy revealed that after three-strain fermentation, the surface structure of the corncob was more significantly disrupted, exhibiting a loose and porous morphology. After 21 days of fermentation, the CP content in the three-strain system increased by 1.43% (P<0.01), while NDF and ADF contents decreased significantly (P<0.01), with degradation rates of 22.12% and 33.97%, respectively. RFQ and RFV increased by 82.80% and 17.21%, respectively.

Conclusion

The three-strain synergistic fermentation effectively degraded corncob lignin, achieving an ADL degradation rate of 63.42%, a 1.43% increase in CP content, and significant fiber degradation. RFQ was increased by 82.80%, and RFV was substantially enhanced. These findings provide a technical support for the utilization of corncobs as animal feed.

white-rot fungi  /  corncob  /  acid detergent lignin  /  nutritional quality  /  feeding value
陈文燕, 周瑞, 吴慧昊, 李耀东, 杨婕, 臧荣鑫, 徐红伟. 基于复合菌的玉米芯发酵工艺构建与优化. 生物技术通报, 2026 , 42 (10) : 37 -46 . DOI: 10.13560/j.cnki.biotech.bull.1985.2025-1369
Wen-yan CHEN, Rui ZHOU, Hui-hao WU, Yao-dong LI, Jie YANG, Rong-xin ZANG, Hong-wei XU. Construction and Optimization of Corncob Fermentation Process Using Composite Microbial Inoculum[J]. Biotechnology Bulletin, 2026 , 42 (10) : 37 -46 . DOI: 10.13560/j.cnki.biotech.bull.1985.2025-1369
Year 2026 volume 42 Issue 10
107
50
Cite this Article
BibTeX
Article Info
doi: 10.13560/j.cnki.biotech.bull.1985.2025-1369
  • Receive Date:2025-12-15
  • Online Date:2026-11-12
  • Published:2026-10-26
Article Data
Affiliations
History
  • Received:2025-12-15
Affiliations
    1School of Life Science and Engineering, Northwest Minzu University, Lanzhou 730100
    2Green Animal Husbandry Center, Lanzhou 730030
References
Share
https://castjournals.cast.org.cn/joweb/swjstb/EN/10.13560/j.cnki.biotech.bull.1985.2025-1369
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT