收藏切换
Tungsten and Molybdenum Desorption of Strong Basic Anion Exchange Resin
收藏切换
PDF
Lulu WANG, Xinxin WANG, Junjie WANG, Lige CHEN, Dezhi LIU, Kai LUO
Hydrometallurgy of China | 2024, 43(1) : 74 - 79
Less
收藏切换
Hydrometallurgy of China | 2024, 43(1): 74-79
Experiment Research
Tungsten and Molybdenum Desorption of Strong Basic Anion Exchange Resin
Full
Lulu WANG, Xinxin WANG, Junjie WANG, Lige CHEN, Dezhi LIU, Kai LUO
Affiliations
  • Luoyang Luanchuan Molybdenum Group Tungsten Co., Ltd., Luanchuan 471500, China
Published: 2024-02-20 doi: 10.13355/j.cnki.sfyj.2024.01.012
Outline
收藏切换

The desorption of tungsten and molybdenum from ZGA351 porous strong basic anion exchange resin using NaOH+NaNO3 as desorption agent and H2O2 as strong oxidant was studied. The effects of combined adsorbent composition,concentration of NaOH, concentration of NaNO3, concentration and dosage of H2O2, flow rate ratio of NaOH+NaNO3/H2O2 and desorption times on the desorption of tungsten and molybdenum were investigated. The results show that under the conditions of NaOH concentration of 1.5 mol/L, NaNO3 concentration of 5%, H2O2 addition of 1.2 times the theoretical doasge, H2O2 concentration of 30%, the NaOH+NaNO3/H2O2 flow rate of 40 for 6 times, the tungsten and molybdenum desorption rate are 99.48% and 99.38%, respectively. The molybdenum penetration adsorption capacity of the resin is 107.10 g/L, which is similar to that of the new resin 107.77 g/L, indicating that the adsorption properties of ZGA351 resin remained basically unchanged after one desorption and cyclic adsorption. The mass concentration of tungsten in the primary desorption solution is 3.82 g/L, the mass concentration of molybdenum is 10.71 g/L, and the ratio of molybdenum to tungsten is 2.80. After adjusting the acid, it can be directly put into the subsequent industrial production section to make ammonium molybdate products. The results of 30 desorption and adsorption cycles show that the service life of the resin can meet the requirements of industrial production cost. The method synchronizes the process of liquid absorption oxygenation and resin regeneration.The process is simplified, the production cost is reduced, and a feasible process route is explored for the desorption process of large pore strong basic anion exchange resin.

tungsten  /  molybdenum  /  strong basic anion exchange resin  /  seperation  /  desorption  /  adsorption  /  oxidation  /  regeneration
Lulu WANG, Xinxin WANG, Junjie WANG, Lige CHEN, Dezhi LIU, Kai LUO. Tungsten and Molybdenum Desorption of Strong Basic Anion Exchange Resin[J]. Hydrometallurgy of China, 2024 , 43 (1) : 74 -79 . DOI: 10.13355/j.cnki.sfyj.2024.01.012
Year 2024 volume 43 Issue 1
PDF
294
119
Cite this Article
BibTeX
Article Info
doi: 10.13355/j.cnki.sfyj.2024.01.012
  • Receive Date:2023-09-13
  • Online Date:2025-09-10
  • Published:2024-02-20
Article Data
Affiliations
History
  • Received:2023-09-13
Affiliations
    Luoyang Luanchuan Molybdenum Group Tungsten Co., Ltd., Luanchuan 471500, China
References
Share
https://castjournals.cast.org.cn/joweb/sfyj/EN/10.13355/j.cnki.sfyj.2024.01.012
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT