收藏切换
Optimization of Process Parameters for Impurity Removal of Copper Electrolysis Waste Liquid Based on Response Surface Methodology
收藏切换
Xicong LYU1, 2, Wentao TANG1, Zhujun LIANG1, Yuandong LIU1, Mengxue LI3
Hydrometallurgy of China | 2025, 44(5) : 681 - 691
Less
收藏切换
Hydrometallurgy of China | 2025, 44(5): 681-691
• Experiment Research •
Optimization of Process Parameters for Impurity Removal of Copper Electrolysis Waste Liquid Based on Response Surface Methodology
Full
Xicong LYU1, 2, Wentao TANG1, Zhujun LIANG1, Yuandong LIU1, Mengxue LI3
Affiliations
  • 1.Metallurgical and Chemical Research Institute, Guixi Smelter, Guixi 335424, China
  • 2.JCC (Guixi) Neo_Metallurgical & Chemical Technology Co., Ltd., Guixi 335424, China
  • 3.Jiangxi Copper Technology Research Institute Co., Ltd., Nanchang 330096, China
Published: 2025-10-20 doi: 10.13355/j.cnki.sfyj.2025.05.014
Outline
收藏切换

Removal of impurities (arsenic, antimony, bismuth) from copper electrolytic waste liquid by hydrogen sulfide was studied. The effects of the excess coefficient of hydrogen sulfide, reaction temperature, reaction time and stirring speed on the impurity removal of copper electrolytic waste liquid were investigated. The experimental conditions were further optimized by the response surface methodology, and the experiments were verified under these conditions. The results show that the optimal test conditions are as follows:the excess coefficient of hydrogen sulfide is 1.9, the reaction temperature is 68.1 ℃, the reaction time is 2.1 h, and the stirring speed is 524 r/min. Under the optimal conditions, the average impurity removal rate of copper electrolysis waste liquid can reach 94.2%. The optimized process parameters determined by the method are reliable and applicable, and will not affect the subsequent recovery of nickel elements.

copper electrolysis waste liquid  /  response surface methodology  /  hydrogen sulfide  /  impurity removal  /  arsenic  /  antimony  /  bismuth
吕喜聪, 唐文涛, 梁柱俊, 刘远东, 李梦雪. 基于响应曲面法的铜电解废液脱杂工艺参数优化研究. 湿法冶金, 2025 , 44 (5) : 681 -691 . DOI: 10.13355/j.cnki.sfyj.2025.05.014
Xicong LYU, Wentao TANG, Zhujun LIANG, Yuandong LIU, Mengxue LI. Optimization of Process Parameters for Impurity Removal of Copper Electrolysis Waste Liquid Based on Response Surface Methodology[J]. Hydrometallurgy of China, 2025 , 44 (5) : 681 -691 . DOI: 10.13355/j.cnki.sfyj.2025.05.014
Year 2025 volume 44 Issue 5
124
25
Cite this Article
BibTeX
Article Info
doi: 10.13355/j.cnki.sfyj.2025.05.014
  • Receive Date:2025-04-09
  • Online Date:2026-09-20
  • Published:2025-10-20
Article Data
Affiliations
History
  • Received:2025-04-09
Affiliations
    1.Metallurgical and Chemical Research Institute, Guixi Smelter, Guixi 335424, China
    2.JCC (Guixi) Neo_Metallurgical & Chemical Technology Co., Ltd., Guixi 335424, China
    3.Jiangxi Copper Technology Research Institute Co., Ltd., Nanchang 330096, China
References
Share
https://castjournals.cast.org.cn/joweb/sfyj/EN/10.13355/j.cnki.sfyj.2025.05.014
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT