收藏切换
Optimization and Experimental Study on Flow Channels of Large-flow Vertical Shaft Tubular Pump Station
收藏切换
Zheng-qian WANG1, Meng-zhao CHENG1, Meng YAO2, Huai-jie HE1, Jin ZHANG1, Chao GAO2, Yong-gang CHAI2, Shu-yun FENG2
Water Resources and Power | 2026, 44(1) : 157 - 162
Less
收藏切换
Water Resources and Power | 2026, 44(1): 157-162
Optimization and Experimental Study on Flow Channels of Large-flow Vertical Shaft Tubular Pump Station
Full
Zheng-qian WANG1, Meng-zhao CHENG1, Meng YAO2, Huai-jie HE1, Jin ZHANG1, Chao GAO2, Yong-gang CHAI2, Shu-yun FENG2
Affiliations
  • 1.PowerChina Huadong Engineering Corporation Limited, Hangzhou 311122, China
  • 2.Tianjin Yongding River Management Center, Tianjin 300130, China
Published: 2026-01-25 doi: 10.20040/j.cnki.1000-7709.2026.20250397
Outline
收藏切换

To enhance operational efficiency and safety of low-lift, high-flow vertical shaft tubular pumping station, taking a large-scale pumping station in Tianjin for an example, the optimization design of inlet and outlet flow passages was conducted by the CFD numerical simulations. The practical aspects including flow passage head loss, velocity uniformity, motor chamber space, and hoisting equipment capacity were studied. By considering the characteristic flow rates and lift of the pumping station, optimal combinations of hydraulic models and flow passages were selected. The overall energy performance of the pumping station system was simulated to evaluate its applicability and efficiency. The design scheme was further validated through physical model tests. The results demonstrate that inlet flow passage schemes J1 and J2 exhibited favorable velocity uniformity and head loss characteristics, with scheme J1 showing marginally superior performance. For outlet flow passages, schemes C1 and C2 displayed comparable performance, though C2 offered a more rational equipment layout due to its shorter transition section. The combined scheme J2+C2 proved suitable for low-lift, high-flow pumping stations when considering motor chamber dimensions and gate design. Ultimately, the TJ04-ZL-06 hydraulic model (impeller diameter of 4 m, rotational speed of 88.9 r/min, blade installation angle of -6°) was recommended, ensuring safe and efficient operation across the specified lift and flow rate ranges.

low-lift pump station  /  hydraulic performance  /  flow passage optimization  /  CFD numerical simulation  /  device model test
王拯谦, 程蒙召, 姚猛, 贺怀杰, 张瑨, 高超, 柴永刚, 丰淑云. 大流量竖井贯流泵站流道优化及试验. 水电能源科学, 2026 , 44 (1) : 157 -162 . DOI: 10.20040/j.cnki.1000-7709.2026.20250397
Zheng-qian WANG, Meng-zhao CHENG, Meng YAO, Huai-jie HE, Jin ZHANG, Chao GAO, Yong-gang CHAI, Shu-yun FENG. Optimization and Experimental Study on Flow Channels of Large-flow Vertical Shaft Tubular Pump Station[J]. Water Resources and Power, 2026 , 44 (1) : 157 -162 . DOI: 10.20040/j.cnki.1000-7709.2026.20250397
Year 2026 volume 44 Issue 1
85
10
Cite this Article
BibTeX
Article Info
doi: 10.20040/j.cnki.1000-7709.2026.20250397
  • Receive Date:2025-03-15
  • Online Date:2026-09-28
  • Published:2026-01-25
Article Data
Affiliations
History
  • Received:2025-03-15
  • Revised:2025-04-09
  • Accepted:2025-04-12
Funding
Affiliations
    1.PowerChina Huadong Engineering Corporation Limited, Hangzhou 311122, China
    2.Tianjin Yongding River Management Center, Tianjin 300130, China
References
Share
https://castjournals.cast.org.cn/joweb/sdnykx/EN/10.20040/j.cnki.1000-7709.2026.20250397
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT